EBElmar Boorsma

Elmar Boorsma

*This is an algorithmically generated author record based on publicly available information.

Elmar Boorsma has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Advancing Solvent Dehydration with Innovative HybSi® AR Membranes: Economic and Environmental Benefits of Pervaporation

    by Mohammed Nazeer Khan, Elmar Boorsma, Pieter Vandezande, Ilse Lammerink, Rob de Lange, Anita Buekenhoudt, Miet Van Dael

    A techno-economic and environmental evaluation of dehydrating five industrially relevant solvents (isopropanol, acetonitrile, tetrahydrofuran, acetic acid, and n-methyl-2-pyrrolidone) using pervaporation-based processes was performed and compared to their respective traditional distillation processes. A standalone pervaporation and two hybrid processes (i.e., distillation-pervaporation and distillation-pervaporation-distillation) employing HybSi® AR membranes were simulated in Aspen Plus, where the pervaporation module was modeled as a separator block that followed the experimental data. The experiments were performed at a vacuum pressure of 20 mbar and a temperature of 130 °C. The performance was compared based on several technical, economic, and environmental measures, of which key metrics are the levelized cost of separation (LCOS) and CO2 footprint reduction. From the economic perspective, the pervaporation-based processes are much more economical than the distillation processes for isopropanol (up to 42% reduction in LCOS) and acetonitrile (up to 39% reduction in LCOS), while their economic performance is similar to the benchmark process in the case of tetrahydrofuran (only up to 4% reduction in LCOS). For acetic acid (9% higher LCOS) and n-methyl-2-pyrrolidone (124% higher LCOS), the pervaporation-based processes do not perform better than the distillation processes under the current technical and economic considerations. However, a sensitivity analysis showed the potential to make the pervaporation-based processes more economical by improving the permeate flux and membrane module cost. On the other hand, the pervaporation-based processes are much more environmentally friendly for all the solvents studied compared to their respective benchmark processes. The reduction in CO2 footprint is in the order of 86%, 82%, 73%, 82%, and 65%, respectively, for the aforementioned solvents.


  • Open Access

    Unlocking the Benefits of Hybrid and Standalone Pervaporation for Sustainable Isopropanol Dehydration with HybSi® AR Membranes

    by Mohammed Nazeer Khan, Elmar Boorsma, Pieter Vandezande, Ilse Lammerink, Rob de Lange, Anita Buekenhoudt, Miet Van Dael

    This study presents the first combined techno-economic and environmental analysis of IPA dehydration using HybSi® membranes across three configurations, offering a low-emission alternative to conventional azeotropic distillation. The processes are simulated in Aspen Plus, and include two hybrid separation processes (i.e., distillation–pervaporation and distillation–pervaporation–distillation) and one standalone pervaporation process. The pervaporation module uses data from experiments that were performed using HybSi® AR membranes at 130 °C and two vacuum pressures (20 and 50 mbar). The separation processes were systematically compared using a comprehensive set of performance indicators covering technical, economic, and environmental aspects. A new cost-efficiency metric, COPCO, is introduced, alongside updated modeling under 2024 market conditions. The isopropanol recovery and water selectivity were >99.5% and >98.7%, respectively, in all pervaporation-based processes. It was found that the hybrid distillation–pervaporation process resulted in a 42% reduction in the levelized cost of the benchmark azeotropic distillation process, while standalone pervaporation resulted in a 38% reduction. The CO2 footprint was also reduced significantly in all cases, up to 86% in the case of standalone pervaporation compared to azeotropic distillation. The COPCO analysis revealed that the distillation–pervaporation configuration offers the highest cost-efficiency among the evaluated systems. Sensitivity analysis revealed that feed flow rate, average water flux, membrane module price, membrane lifetime, and steam price significantly impact the levelized cost. Lower vacuum pressure and feed water near the azeotropic composition enhance economic performance.