Shahiduzzaman Rabbi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shahiduzzaman Rabbi has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Arif Mia
Phillip M. Drayer Department of Electrical and Computer Engineering, Lamar University, Beaumont, United States, USA
1 shared publication - H M Shamsuzzaman
Graduate Student, Department of Electrical & Computer Engineering, Lamar University, Texas, USA
1 shared publication - Mukter Hossain Emon
Graduate Student, Department of Electrical & Computer Engineering, Lamar University, Texas, USA
1 shared publication Rokunojjaman
1 shared publication- Shakhawat Hossain1 shared publication
Latest Publications
- Open Access
- 20 December 2025
- Published by Raden Intan State Islamic University of Lampung in International Journal of Electronics and Communications Systems
- Vol. 5 (2) , 263-275
Machine Learning–Based Fault Diagnosis in Power Systems: A Comparative Evaluation Using Synthetic Operational Data
Reliable fault identification is crucial for maintaining the stability and smooth operation of modern power systems. However, the advancement of data-driven fault detection models is sometimes hampered by the scarcity of real-world fault data. This study aims to assess the effectiveness of machine learning-based fault diagnostic methods in the context of limited data, using synthetic operational data derived from power system simulations. The study employs a simulation-based quantitative experimental methodology, leveraging synthetic data to simulate several failure scenarios on transmission lines. Experimental findings indicate that while certain classifiers can achieve high accuracy, there are significant differences in performance consistency when faced with complex fault scenarios. Margin-based learning models demonstrate superior performance stability compared to alternative methodologies, especially when faced with limited training data. These results demonstrate that selecting the right method is crucial for machine learning-based defect diagnosis to perform well when data comes from synthetic sources. This study contributes to making power systems more reliable by making fault detection more accurate and efficient and ensuring that maintenance is carried out on schedule to reduce system downtime
- 20 December 2025
- Published by Raden Intan State Islamic University of Lampung in International Journal of Electronics and Communications Systems
- Vol. 5 (2) , 263-275
Open AccessMachine Learning–Based Fault Diagnosis in Power Systems: A Comparative Evaluation Using Synthetic Operational Data
Reliable fault identification is crucial for maintaining the stability and smooth operation of modern power systems. However, the advancement of data-driven fault detection models is sometimes hampered by the scarcity of real-world fault data. This study aims to assess the effectiveness of machine learning-based fault diagnostic methods in the context of limited data, using synthetic operational data derived from power system simulations. The study employs a simulation-based quantitative experimental methodology, leveraging synthetic data to simulate several failure scenarios on transmission lines. Experimental findings indicate that while certain classifiers can achieve high accuracy, there are significant differences in performance consistency when faced with complex fault scenarios. Margin-based learning models demonstrate superior performance stability compared to alternative methodologies, especially when faced with limited training data. These results demonstrate that selecting the right method is crucial for machine learning-based defect diagnosis to perform well when data comes from synthetic sources. This study contributes to making power systems more reliable by making fault detection more accurate and efficient and ensuring that maintenance is carried out on schedule to reduce system downtime
- Open Access
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Challenges and Control Strategies for Hybrid Energy Storage Systems in EV-Integrated Microgrids
The rapid integration of electric vehicles (EVs) into urban power systems has introduced significant variability in energy demand and supply profiles, particularly within microgrids. To maintain grid stability, improve responsiveness, and optimize operational efficiency, the deployment of Hybrid Energy Storage Systems (HESS)-which combine complementary storage technologies such as lithium-ion batteries and supercapacitors-has emerged as a key enabler. However, the dynamic nature of EV charging patterns, diverse storage characteristics, and control constraints present critical challenges in coordinating such hybrid systems. This paper presents a comprehensive review of the technical challenges and state-of-the-art control strategies associated with HESS in EV-integrated microgrids. We identify major performance bottlenecks such as energy dispatch coordination, SoC imbalance, real-time control latency, and degradation asymmetry. We then survey a range of control architectures, including rule-based logic, Model Predictive Control (MPC), and AI-driven adaptive systems, and assess their effectiveness in simulation environments. Through a representative use case and comparative analysis, we demonstrate how optimized control strategies can enhance system resilience, reduce stress on storage components, and support the seamless integration of EV loads into distributed grid infrastructures. The insights presented here contribute toward the design of smarter, more reliable, and scalable microgrids capable of accommodating the accelerating shift to electrified transportation.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessChallenges and Control Strategies for Hybrid Energy Storage Systems in EV-Integrated Microgrids
The rapid integration of electric vehicles (EVs) into urban power systems has introduced significant variability in energy demand and supply profiles, particularly within microgrids. To maintain grid stability, improve responsiveness, and optimize operational efficiency, the deployment of Hybrid Energy Storage Systems (HESS)-which combine complementary storage technologies such as lithium-ion batteries and supercapacitors-has emerged as a key enabler. However, the dynamic nature of EV charging patterns, diverse storage characteristics, and control constraints present critical challenges in coordinating such hybrid systems. This paper presents a comprehensive review of the technical challenges and state-of-the-art control strategies associated with HESS in EV-integrated microgrids. We identify major performance bottlenecks such as energy dispatch coordination, SoC imbalance, real-time control latency, and degradation asymmetry. We then survey a range of control architectures, including rule-based logic, Model Predictive Control (MPC), and AI-driven adaptive systems, and assess their effectiveness in simulation environments. Through a representative use case and comparative analysis, we demonstrate how optimized control strategies can enhance system resilience, reduce stress on storage components, and support the seamless integration of EV loads into distributed grid infrastructures. The insights presented here contribute toward the design of smarter, more reliable, and scalable microgrids capable of accommodating the accelerating shift to electrified transportation.
- Open Access
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Integration of DMR Trunking Communication Systems into Emergency Grid Control Operations
The reliability of emergency communication systems is critical for maintaining stability in electric power grids during disasters, cyber-physical threats, or large-scale blackouts. This paper presents an integrated framework for incorporating Digital Mobile Radio (DMR) trunking communication systems into Supervisory Control and Data Acquisition (SCADA) operations to enhance grid responsiveness during emergency scenarios. The proposed architecture leverages DMR's features-such as time-division multiple access (TDMA), redundant trunking channels, and low-latency voice/data transmission-to ensure real-time command dissemination and secure control signal propagation across substations, control centers, and field devices. A layered integration model is developed, including priority-based communication routing, fallback redundancy logic, and channel authentication mechanisms tailored for SCADA interoperability. Simulation results using a Texas-based microgrid testbed show that the integrated DMR-SCADA system reduces communication recovery time by 32%, improves emergency packet delivery rate by 19%, and increases grid restoration speed under network-constrained conditions. These results support the viability of DMR trunking as a cost-effective and deployable solution for enhancing situational awareness and operational resilience in modern power grid infrastructures.
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessIntegration of DMR Trunking Communication Systems into Emergency Grid Control Operations
The reliability of emergency communication systems is critical for maintaining stability in electric power grids during disasters, cyber-physical threats, or large-scale blackouts. This paper presents an integrated framework for incorporating Digital Mobile Radio (DMR) trunking communication systems into Supervisory Control and Data Acquisition (SCADA) operations to enhance grid responsiveness during emergency scenarios. The proposed architecture leverages DMR's features-such as time-division multiple access (TDMA), redundant trunking channels, and low-latency voice/data transmission-to ensure real-time command dissemination and secure control signal propagation across substations, control centers, and field devices. A layered integration model is developed, including priority-based communication routing, fallback redundancy logic, and channel authentication mechanisms tailored for SCADA interoperability. Simulation results using a Texas-based microgrid testbed show that the integrated DMR-SCADA system reduces communication recovery time by 32%, improves emergency packet delivery rate by 19%, and increases grid restoration speed under network-constrained conditions. These results support the viability of DMR trunking as a cost-effective and deployable solution for enhancing situational awareness and operational resilience in modern power grid infrastructures.
- Open Access
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
SCADA-Based Real-Time Fault Detection in Medium Voltage Urban Distribution Networks
Urban medium voltage (MV) distribution networks are critical for delivering stable power to consumers, yet they face increasing fault risks due to aging infrastructure, rising loads, and integration of distributed energy resources. This paper presents a SCADA-based real-time fault detection framework tailored to MV urban grids. By leveraging high-resolution time-synchronized measurements, feeder-level monitoring, and adaptive thresholding algorithms, the system rapidly identifies faults such as phase-to-ground, phase-to-phase, and transient disturbances. The proposed solution integrates with existing SCADA infrastructure, ensuring scalability and cost-effectiveness. Experimental validation using real-time simulations and field data shows a detection accuracy of over 97%, significantly reducing outage durations and operational risk.
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessSCADA-Based Real-Time Fault Detection in Medium Voltage Urban Distribution Networks
Urban medium voltage (MV) distribution networks are critical for delivering stable power to consumers, yet they face increasing fault risks due to aging infrastructure, rising loads, and integration of distributed energy resources. This paper presents a SCADA-based real-time fault detection framework tailored to MV urban grids. By leveraging high-resolution time-synchronized measurements, feeder-level monitoring, and adaptive thresholding algorithms, the system rapidly identifies faults such as phase-to-ground, phase-to-phase, and transient disturbances. The proposed solution integrates with existing SCADA infrastructure, ensuring scalability and cost-effectiveness. Experimental validation using real-time simulations and field data shows a detection accuracy of over 97%, significantly reducing outage durations and operational risk.
- Open Access
- 30 July 2025
- Published by MDPI AG in Preprints.org
Design of Fire-Resilient Solar Inverter Systems for Wildfire-Prone U.S. Regions
The increasing frequency and intensity of wildfires in the United States, especially in regions like California, have posed significant threats to infrastructure, including solar power systems. Solar inverters, critical components in solar photovoltaic (PV) systems, are particularly vulnerable to high temperatures and fire hazards. This paper proposes a fire-resilient design for solar inverter systems aimed at addressing these vulnerabilities in wildfire-prone regions. We discuss innovative design strategies for improving the thermal stability, durability, and safety of solar inverters, as well as the use of advanced materials and cooling technologies to minimize the risk of fire damage. The proposed solution integrates fire-resistant materials, temperature sensors, and adaptive cooling mechanisms, with the goal of enhancing the reliability of solar energy systems in wildfire-prone areas. Simulation results are presented, demonstrating the effectiveness of these modifications in improving the resilience of solar inverters to fire hazards. This paper provides valuable insights for the design and deployment of fire-resilient solar power systems in vulnerable regions.
- 30 July 2025
- Published by MDPI AG in Preprints.org
Open AccessDesign of Fire-Resilient Solar Inverter Systems for Wildfire-Prone U.S. Regions
The increasing frequency and intensity of wildfires in the United States, especially in regions like California, have posed significant threats to infrastructure, including solar power systems. Solar inverters, critical components in solar photovoltaic (PV) systems, are particularly vulnerable to high temperatures and fire hazards. This paper proposes a fire-resilient design for solar inverter systems aimed at addressing these vulnerabilities in wildfire-prone regions. We discuss innovative design strategies for improving the thermal stability, durability, and safety of solar inverters, as well as the use of advanced materials and cooling technologies to minimize the risk of fire damage. The proposed solution integrates fire-resistant materials, temperature sensors, and adaptive cooling mechanisms, with the goal of enhancing the reliability of solar energy systems in wildfire-prone areas. Simulation results are presented, demonstrating the effectiveness of these modifications in improving the resilience of solar inverters to fire hazards. This paper provides valuable insights for the design and deployment of fire-resilient solar power systems in vulnerable regions.
- Open Access
- 29 July 2025
- Published by MDPI AG in Preprints.org
Grid Synchronization Algorithms for Intermittent Renewable Energy Sources Using AI Control Loops
The increasing integration of intermittent renewable energy sources (RES), such as solar photovoltaics and wind turbines, has introduced significant challenges to grid synchronization and stability. Traditional synchronization mechanisms, including Phase-Locked Loops (PLLs) and Voltage-Controlled Oscillators (VCOs), often struggle under weak grid conditions and high-frequency disturbances associated with inverter-based RES. This paper proposes a novel grid synchronization framework utilizing Artificial Intelligence (AI)-enabled control loops to adaptively track phase and frequency variations in real time. By incorporating neural network-assisted synchronization and reinforcement learning (RL)-based feedback tuning, the proposed architecture enhances phase detection accuracy, reduces synchronization delay, and improves power quality during grid fluctuations. A simulation-based evaluation is conducted on a renewable-integrated IEEE test system, demonstrating the efficacy of the AI control loops compared to conventional synchronization algorithms. The results show significant improvements in dynamic response time, synchronization stability, and harmonic suppression. The proposed solution offers a scalable and intelligent approach to synchronization in evolving smart grid environments.
- 29 July 2025
- Published by MDPI AG in Preprints.org
Open AccessGrid Synchronization Algorithms for Intermittent Renewable Energy Sources Using AI Control Loops
The increasing integration of intermittent renewable energy sources (RES), such as solar photovoltaics and wind turbines, has introduced significant challenges to grid synchronization and stability. Traditional synchronization mechanisms, including Phase-Locked Loops (PLLs) and Voltage-Controlled Oscillators (VCOs), often struggle under weak grid conditions and high-frequency disturbances associated with inverter-based RES. This paper proposes a novel grid synchronization framework utilizing Artificial Intelligence (AI)-enabled control loops to adaptively track phase and frequency variations in real time. By incorporating neural network-assisted synchronization and reinforcement learning (RL)-based feedback tuning, the proposed architecture enhances phase detection accuracy, reduces synchronization delay, and improves power quality during grid fluctuations. A simulation-based evaluation is conducted on a renewable-integrated IEEE test system, demonstrating the efficacy of the AI control loops compared to conventional synchronization algorithms. The results show significant improvements in dynamic response time, synchronization stability, and harmonic suppression. The proposed solution offers a scalable and intelligent approach to synchronization in evolving smart grid environments.
- Open Access
- 28 July 2025
- Published by MDPI AG in Preprints.org
Extremum-Seeking MPPT Control for Z-Source Inverters in Grid-Connected Solar PV Systems
Maximum Power Point Tracking (MPPT) is a crucial technique in optimizing the energy conversion efficiency of photovoltaic (PV) systems. Among the various MPPT methods, Extremum-Seeking (ES) control has emerged as an effective, model-free approach for real-time power optimization in renewable energy systems. This paper proposes an Extremum-Seeking MPPT control technique for Z-Source Inverters (ZSIs) in grid-connected solar PV systems. The ZSI offers advantages over traditional inverters by providing improved efficiency and inherent protection against voltage spikes. The proposed approach aims to efficiently track the Maximum Power Point (MPP) under varying environmental conditions such as irradiance and temperature. Simulation results demonstrate the superior performance of the Extremum-Seeking MPPT technique in terms of tracking speed, accuracy, and robustness in comparison to conventional MPPT methods. The system’s integration with a Z-Source inverter further enhances system stability and performance.
- 28 July 2025
- Published by MDPI AG in Preprints.org
Open AccessExtremum-Seeking MPPT Control for Z-Source Inverters in Grid-Connected Solar PV Systems
Maximum Power Point Tracking (MPPT) is a crucial technique in optimizing the energy conversion efficiency of photovoltaic (PV) systems. Among the various MPPT methods, Extremum-Seeking (ES) control has emerged as an effective, model-free approach for real-time power optimization in renewable energy systems. This paper proposes an Extremum-Seeking MPPT control technique for Z-Source Inverters (ZSIs) in grid-connected solar PV systems. The ZSI offers advantages over traditional inverters by providing improved efficiency and inherent protection against voltage spikes. The proposed approach aims to efficiently track the Maximum Power Point (MPP) under varying environmental conditions such as irradiance and temperature. Simulation results demonstrate the superior performance of the Extremum-Seeking MPPT technique in terms of tracking speed, accuracy, and robustness in comparison to conventional MPPT methods. The system’s integration with a Z-Source inverter further enhances system stability and performance.