Guixiang Yin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guixiang Yin has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Wenbin Li
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
3 shared publications - Chuanqi Yu
Nanjing University of Science and Technology, China
2 shared publications - Chuanyun Tao
Nanjing University of Science and Technology, China
2 shared publications - Hong Tang
Shanxi JinXi Industry Group Co., Ltd, China
2 shared publications - Junhan Chen
Nanjing University of Science and Technology, China
2 shared publications - Wei Ge
Shanxi JinXi Industry Group Co., Ltd, China
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (10)
Mechanical Properties of Silicon Carbide Ceramic and Its Penetration Resistance to Tungsten Alloy Fragments
Silicon carbide (SiC) ceramics have been widely used in lightweight armor protection due to their combination of high compressive strength, high hardness, and low density. The mechanical properties and penetration resistance of SiC ceramics are of significant importance for armor protection design. To investigate the mechanical response and fragment penetration resistance of SiC ceramics, this study systematically carried out plate impact tests, dynamic and quasi-static uniaxial compression tests, as well as ballistic penetration tests. Based on the experimental data, the parameters of the Johnson-Holmquist II (JH-2) constitutive model for the SiC ceramic were calibrated. Subsequently, a numerical simulation model of tungsten alloy fragment penetration into SiC ceramic composite targets was established. The model was validated using tungsten alloy fragment penetration tests on SiC/6061-T6 composite targets, and the penetration characteristics of fragments into SiC/6061-T6 composite targets were systematically compared with those into monolithic 6061-T6 aluminum alloy targets. The error between the experimental and simulation results of the composite target penetration tests is less than 9%, verifying the accuracy of the calibrated JH-2 model parameters. For monolithic 6061-T6 aluminum alloy targets, the penetration depth of spherical fragments is significantly greater than that of cubic and cylindrical fragments. In contrast, for the ceramic composite targets, the residual penetration depth of spherical fragments is markedly lower, indicating that SiC ceramic exhibits substantially better resistance to spherical fragments than to the other two fragment shapes. This study can provide a theoretical basis and data support for the design and performance evaluation of lightweight armor protection.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (10)
Open AccessMechanical Properties of Silicon Carbide Ceramic and Its Penetration Resistance to Tungsten Alloy Fragments
Silicon carbide (SiC) ceramics have been widely used in lightweight armor protection due to their combination of high compressive strength, high hardness, and low density. The mechanical properties and penetration resistance of SiC ceramics are of significant importance for armor protection design. To investigate the mechanical response and fragment penetration resistance of SiC ceramics, this study systematically carried out plate impact tests, dynamic and quasi-static uniaxial compression tests, as well as ballistic penetration tests. Based on the experimental data, the parameters of the Johnson-Holmquist II (JH-2) constitutive model for the SiC ceramic were calibrated. Subsequently, a numerical simulation model of tungsten alloy fragment penetration into SiC ceramic composite targets was established. The model was validated using tungsten alloy fragment penetration tests on SiC/6061-T6 composite targets, and the penetration characteristics of fragments into SiC/6061-T6 composite targets were systematically compared with those into monolithic 6061-T6 aluminum alloy targets. The error between the experimental and simulation results of the composite target penetration tests is less than 9%, verifying the accuracy of the calibrated JH-2 model parameters. For monolithic 6061-T6 aluminum alloy targets, the penetration depth of spherical fragments is significantly greater than that of cubic and cylindrical fragments. In contrast, for the ceramic composite targets, the residual penetration depth of spherical fragments is markedly lower, indicating that SiC ceramic exhibits substantially better resistance to spherical fragments than to the other two fragment shapes. This study can provide a theoretical basis and data support for the design and performance evaluation of lightweight armor protection.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (10)
Numerical Evaluation of Dynamic Constitutive Models and Modified Analytical Modeling for High-Velocity Penetration of Ultra-High-Performance Concrete (UHPC)
This study evaluates and improves models for predicting the high-velocity penetration response of ultra-high-performance concrete (UHPC) used in protective structures. The research scope involves systematically comparing three common concrete constitutive models: Holmquist–Johnson–Cook (HJC), Riedel–Hiermaier–Thoma (RHT), and Karagozian & Case (K&C). First, the models' theoretical differences regarding strain-rate effects and tension-compression asymmetry were analyzed. Next, their material parameters were calibrated using fundamental mechanical tests and literature data. An LS-DYNA finite element model was then established and validated against ballistic experiments (633-959 m/s) by evaluating penetration depth, surface crater morphology, and internal damage evolution. The results indicate that the HJC model is the optimal choice for high-velocity penetration simulations. It yielded the lowest average depth error (-11.89%), and its localized damage pattern best matched UHPC's high-strength and high-toughness traits. In contrast, the RHT model caused premature matrix softening under high hydrostatic pressure, leading to a -21.76% error. The K&C model overpredicted surface funnel-shaped crater damage, with its penetration depth error increasing to -26.34% at high velocities. Furthermore, extended simulations at 800–1500 m/s revealed that the traditional Forrestal analytical model deviates significantly in the ultra-high-velocity regime. To solve this, a modified analytical model tailored for UHPC was developed. By accounting for dynamic yield and high-pressure shear rheological softening mechanisms, the new model introduces a dynamic strengthening coefficient and a rheological softening factor. Ballistic validation demonstrates that, within the validated range, the theoretical predictions of this modified model match the experimental data well, with a maximum relative error of 14.54%. Overall, this research provides reliable numerical model selection and theoretical support for designing and evaluating UHPC protective structures against kinetic energy projectile impacts.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (10)
Open AccessNumerical Evaluation of Dynamic Constitutive Models and Modified Analytical Modeling for High-Velocity Penetration of Ultra-High-Performance Concrete (UHPC)
This study evaluates and improves models for predicting the high-velocity penetration response of ultra-high-performance concrete (UHPC) used in protective structures. The research scope involves systematically comparing three common concrete constitutive models: Holmquist–Johnson–Cook (HJC), Riedel–Hiermaier–Thoma (RHT), and Karagozian & Case (K&C). First, the models' theoretical differences regarding strain-rate effects and tension-compression asymmetry were analyzed. Next, their material parameters were calibrated using fundamental mechanical tests and literature data. An LS-DYNA finite element model was then established and validated against ballistic experiments (633-959 m/s) by evaluating penetration depth, surface crater morphology, and internal damage evolution. The results indicate that the HJC model is the optimal choice for high-velocity penetration simulations. It yielded the lowest average depth error (-11.89%), and its localized damage pattern best matched UHPC's high-strength and high-toughness traits. In contrast, the RHT model caused premature matrix softening under high hydrostatic pressure, leading to a -21.76% error. The K&C model overpredicted surface funnel-shaped crater damage, with its penetration depth error increasing to -26.34% at high velocities. Furthermore, extended simulations at 800–1500 m/s revealed that the traditional Forrestal analytical model deviates significantly in the ultra-high-velocity regime. To solve this, a modified analytical model tailored for UHPC was developed. By accounting for dynamic yield and high-pressure shear rheological softening mechanisms, the new model introduces a dynamic strengthening coefficient and a rheological softening factor. Ballistic validation demonstrates that, within the validated range, the theoretical predictions of this modified model match the experimental data well, with a maximum relative error of 14.54%. Overall, this research provides reliable numerical model selection and theoretical support for designing and evaluating UHPC protective structures against kinetic energy projectile impacts.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (2)
A Hybrid YOLO–Mamba Deep Learning Framework for Real-time Ballistic Limit Velocity Prediction with Multiphysics-coupled Feature Fusion
To support dynamic penetration decision-making, the millisecond-level real-time response requirement of missile attitude control systems requires efficient ballistic limit velocity (BLV) prediction models. This study proposes a deep learning model based on a YOLO–Mamba hybrid architecture, which achieves the adaptive modeling of multiphysical field coupling effects through feature cross-modules and polynomial expansion. The global feature extraction capability of YOLO and the local temporal modeling of Mamba synergistically enhance multiscale feature capture. In experiments, the model’s inference speed is 1.3 times greater than that of traditional methods, and its prediction error on ballistic datasets is reduced by 32.5–47.8% compared to those of SVM/random forests while maintaining a generalization accuracy of over 92% in data-scarce scenarios. The proposed model serves as a high-precision tool for the optimization of protective materials, and the YOLO–Mamba hybrid architecture offers a novel approach to data-driven modeling of complex impact dynamics problems.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 23 (2)
Open AccessA Hybrid YOLO–Mamba Deep Learning Framework for Real-time Ballistic Limit Velocity Prediction with Multiphysics-coupled Feature Fusion
To support dynamic penetration decision-making, the millisecond-level real-time response requirement of missile attitude control systems requires efficient ballistic limit velocity (BLV) prediction models. This study proposes a deep learning model based on a YOLO–Mamba hybrid architecture, which achieves the adaptive modeling of multiphysical field coupling effects through feature cross-modules and polynomial expansion. The global feature extraction capability of YOLO and the local temporal modeling of Mamba synergistically enhance multiscale feature capture. In experiments, the model’s inference speed is 1.3 times greater than that of traditional methods, and its prediction error on ballistic datasets is reduced by 32.5–47.8% compared to those of SVM/random forests while maintaining a generalization accuracy of over 92% in data-scarce scenarios. The proposed model serves as a high-precision tool for the optimization of protective materials, and the YOLO–Mamba hybrid architecture offers a novel approach to data-driven modeling of complex impact dynamics problems.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (12) , e8798
Fusion of Ensemble Learning and Terminal Ballistics: A Multiscale Predictive Framework for Penetration Depth Estimation
In order to solve the problems related to the prediction of penetration depth of composite materials, a new method combining physical mechanism and data driving is proposed in this paper. This method integrates 53 groups of ballistic experimental data and 278 groups of LS-DYNA simulation data to construct a data set with 23 characteristic parameters. Previous studies have shown that the ratio of the radius of the circular arc of the warhead to the diameter of the projectile (CRH) has a significant influence on the penetration depth of the projectile. This paper uses the hyperbolic tangent function (tanh(2CRH)) to calculate its saturation effect and conduct in-depth analysis. An adaptive noise injection method of concrete type is used in data processing, which can reduce the data distribution difference between C80 and C150 to 42%. At the same time, because of the modified sequential forward selection algorithm, the input dimension of the model is reduced by 56% and its important physical characteristics are retained. Finally, a Bayesian-optimized Bagging integrated model is constructed, which realizes the high accuracy prediction of RMSE (Root mean square error)=0.23 m and R2=0.90 on the test set. The test data show that when the fiber content reaches about 1%, the penetration resistance of the material is obviously improved. This discovery provides a new direction for optimizing protective materials. Compared with the traditional Forrestal theoretical model, this model not only reduces the prediction error by 92%, but also verifies the effectiveness and universality of the "physical mechanism-guided + data-driven correction" hybrid modeling method in complex penetration problems, providing a generalizable research paradigm for similar engineering mechanics problems that are difficult to fully parameterize.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (12) , e8798
Open AccessFusion of Ensemble Learning and Terminal Ballistics: A Multiscale Predictive Framework for Penetration Depth Estimation
In order to solve the problems related to the prediction of penetration depth of composite materials, a new method combining physical mechanism and data driving is proposed in this paper. This method integrates 53 groups of ballistic experimental data and 278 groups of LS-DYNA simulation data to construct a data set with 23 characteristic parameters. Previous studies have shown that the ratio of the radius of the circular arc of the warhead to the diameter of the projectile (CRH) has a significant influence on the penetration depth of the projectile. This paper uses the hyperbolic tangent function (tanh(2CRH)) to calculate its saturation effect and conduct in-depth analysis. An adaptive noise injection method of concrete type is used in data processing, which can reduce the data distribution difference between C80 and C150 to 42%. At the same time, because of the modified sequential forward selection algorithm, the input dimension of the model is reduced by 56% and its important physical characteristics are retained. Finally, a Bayesian-optimized Bagging integrated model is constructed, which realizes the high accuracy prediction of RMSE (Root mean square error)=0.23 m and R2=0.90 on the test set. The test data show that when the fiber content reaches about 1%, the penetration resistance of the material is obviously improved. This discovery provides a new direction for optimizing protective materials. Compared with the traditional Forrestal theoretical model, this model not only reduces the prediction error by 92%, but also verifies the effectiveness and universality of the "physical mechanism-guided + data-driven correction" hybrid modeling method in complex penetration problems, providing a generalizable research paradigm for similar engineering mechanics problems that are difficult to fully parameterize.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (7) , e8642
Study on the fracture behavior of tungsten alloy projectile cores under impact loading
To investigate the influence of spaced targets with large angle of obliquity on the penetration performance of tungsten alloy long rod projectiles with large length-diameter ratio, this study conducted experiments and numerical simulations on the penetration of 93W long rod projectiles into oblique spaced targets. By experiments, the fracture morphology of the long rod projectile after penetrating the target was successfully captured. The recovered cores and were systematically analyzed by scanning electron microscopy (SEM). The results indicate that the fracture mode of the long rod projectile was mainly manifested as transgranular fracture of tungsten grains. In addition, the J-C constitutive parameters of 93W were determined. The mechanism of action for long rod projectiles penetrating spaced targets with large angle of obliquity was ballistic deflection and the fracture of long rod projectiles. By altering structure of the long rod projectiles, the penetration effectiveness against oblique spaced targets could be significantly enhanced.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (7) , e8642
Open AccessStudy on the fracture behavior of tungsten alloy projectile cores under impact loading
To investigate the influence of spaced targets with large angle of obliquity on the penetration performance of tungsten alloy long rod projectiles with large length-diameter ratio, this study conducted experiments and numerical simulations on the penetration of 93W long rod projectiles into oblique spaced targets. By experiments, the fracture morphology of the long rod projectile after penetrating the target was successfully captured. The recovered cores and were systematically analyzed by scanning electron microscopy (SEM). The results indicate that the fracture mode of the long rod projectile was mainly manifested as transgranular fracture of tungsten grains. In addition, the J-C constitutive parameters of 93W were determined. The mechanism of action for long rod projectiles penetrating spaced targets with large angle of obliquity was ballistic deflection and the fracture of long rod projectiles. By altering structure of the long rod projectiles, the penetration effectiveness against oblique spaced targets could be significantly enhanced.