BWBowen Wang

Bowen Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bowen Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cryogenic Model Transfer Across Zones: Transient Thermal Shock Behavior and Dry Environment Preservation

    by Yuanping He, Feifei Zhao, Liang Fang, Ming Liao, Bowen Wang, Jingdong Huang, Xingfu Hong

    Rapid transfer of large cryogenic models between ambient and cryogenic environments causes severe thermal shocks to the dry air system, threatening dew-point stability and equipment safety. Using CFD, this study builds a 1:1 model of a cryogenic transport isolation system, including the dry hall, model carrier, temperature-conditioning room, and test section plenum. Three scenarios are analyzed: static suspension, descent to the temperature-conditioning room, and descent to the test section plenum. The effects of descent speed (1.2 vs. 2.5 m/min) and makeup air flow (0–12,500 m3/h) on temperature distribution and cable safety are examined. Results show that after 10 min of static suspension, the carrier interior averages 192 K with strong stratification and a minimum of 170 K. During descent, higher speed and larger air flow improve thermal retention. At 2.5 m/min and 10,000 m3/h, cable-adjacent gas stays above −60 °C. For the plenum, descent-matched displacement ventilation (e.g., 6000 m3/h for 1.2 m/min) keeps both the cable and the plug-in unit safe. Including the cable thermal capacity gives a smaller actual temperature drop than conservative gas-temperature estimates. This work provides numerical guidance for dry system design, operation optimization, and cryogenic protection during rapid model transfer.

  • Open Access

    Dynamic Wear Modeling and Experimental Verification of Guide Cone in Passive Compliant Connectors Based on the Archard Model

    by Yuanping He, Bowen Wang, Feifei Zhao, Xingfu Hong, Liang Fang, Weihao Xu, Ming Liao, Fujing Tian

    To address the wear life prediction challenge of Guide Cones in passive compliant connectors under dynamic loads within specialized equipment, this study proposes a dynamic wear modeling and life assessment method based on the improved Archard model. Through integrated theoretical modeling, finite element simulation, and experimental validation, we establish a bidirectional coupling framework analyzing dynamic contact mechanics and wear evolution. By developing phased contact state identification criteria and geometric constraints, a transient load calculation model is established, revealing dynamic load characteristics with peak contact forces reaching 206.34 N. A dynamic contact stress integration algorithm is proposed by combining Archard’s theory with ABAQUS finite element simulation and ALE adaptive meshing technology, enabling real-time iterative updates of wear morphology and contact stress. This approach constructs an exponential model correlating cumulative wear depth with docking cycles (R2 = 0.997). Prototype experiments demonstrate a mean absolute percentage error (MAPE) of 14.6% between simulated and measured wear depths, confirming model validity. With a critical wear threshold of 0.8 mm, the predicted service life reaches 45,270 cycles, meeting 50-year operational requirements (safety margin: 50.9%). This research provides theoretical frameworks and engineering guidelines for wear-resistant design, material selection, and life evaluation in high-reliability automatic docking systems.