Gerard Ruiz-Carregal
Research Subjects
Gerard Ruiz-Carregal has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Heredia
Dares Technology, Barcelona, Spain
2 shared publications - Azadeh Faridi
Dares Technology, Barcelona, Spain
2 shared publications - Carlos Lopez-Martinez
CommSensLab, Department of Signal Theory and Communications, Universitat Politcnica de Catalunya, Barcelona, Spain
2 shared publications - Dani Monells
Dares Technology, Barcelona, Spain
2 shared publications - Eduardo Makhoul
Dares Technology, Barcelona, Spain
2 shared publications - Gerard Masalias
Dares Technology, Barcelona, Spain
2 shared publications
Latest Publications
- Open Access
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 850-874
Drone-Based MT-DInSAR for High-Magnitude 3-D Displacement Retrieval With Daily Revisits
Multitemporal differential interferometric synthetic aperture radar (MT-DInSAR) techniques have become essential tools for monitoring ground displacement with millimeter-scale precision. While widely applied to spaceborne SAR systems for global, long-term monitoring, and to ground-based SAR (GBSAR) for continuous tracking in localized areas, these platforms remain constrained by fixed acquisition geometries and line-of-sight (LOS) sensitivity. In addition, spaceborne systems face inherent limitations in capturing high-magnitude displacements due to their relatively long revisit times, often leading to temporal decorrelation in such scenarios. In this context, airborne SAR systems offer a compromise by enabling flexible acquisition geometries and on-demand revisit times, with drone platforms emerging as a cost-effective alternative to the high operational and logistical demands of conventional airborne systems. This article presents the SAR-Drone system, a Ku-band drone-based SAR, and a coregistration and interferometric processor together with two multitemporal DInSAR (MT-DInSAR) methodologies adapted to the SAR-Drone data. The first is displacement-based and designed for scenarios with moderate motion, where interferometric phase remains coherent between consecutive acquisitions; the second is velocity-based, targeting scenarios with high-magnitude displacements where decorrelation occurs even when only a few hours separate acquisitions. The displacement-based methodology is validated in a controlled experiment using corner reflectors, while the velocity-based methodology is demonstrated in a real open-pit mine, where metric-scale slope movements occur within intervals of approximately one day. The results presented in the article demonstrate the potential of drone-based SAR to complement existing spaceborne, ground-based, and airborne systems by enabling high-resolution 3-D displacement tracking in complex and rapidly evolving environments.
- 27 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 850-874
Open AccessDrone-Based MT-DInSAR for High-Magnitude 3-D Displacement Retrieval With Daily Revisits
Multitemporal differential interferometric synthetic aperture radar (MT-DInSAR) techniques have become essential tools for monitoring ground displacement with millimeter-scale precision. While widely applied to spaceborne SAR systems for global, long-term monitoring, and to ground-based SAR (GBSAR) for continuous tracking in localized areas, these platforms remain constrained by fixed acquisition geometries and line-of-sight (LOS) sensitivity. In addition, spaceborne systems face inherent limitations in capturing high-magnitude displacements due to their relatively long revisit times, often leading to temporal decorrelation in such scenarios. In this context, airborne SAR systems offer a compromise by enabling flexible acquisition geometries and on-demand revisit times, with drone platforms emerging as a cost-effective alternative to the high operational and logistical demands of conventional airborne systems. This article presents the SAR-Drone system, a Ku-band drone-based SAR, and a coregistration and interferometric processor together with two multitemporal DInSAR (MT-DInSAR) methodologies adapted to the SAR-Drone data. The first is displacement-based and designed for scenarios with moderate motion, where interferometric phase remains coherent between consecutive acquisitions; the second is velocity-based, targeting scenarios with high-magnitude displacements where decorrelation occurs even when only a few hours separate acquisitions. The displacement-based methodology is validated in a controlled experiment using corner reflectors, while the velocity-based methodology is demonstrated in a real open-pit mine, where metric-scale slope movements occur within intervals of approximately one day. The results presented in the article demonstrate the potential of drone-based SAR to complement existing spaceborne, ground-based, and airborne systems by enabling high-resolution 3-D displacement tracking in complex and rapidly evolving environments.
- 30 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-20
Accurate Residual Motion Error Estimation for High-Frequency Drone-Borne SAR Interferometry
Accurate flight trajectory knowledge is crucial for airborne and drone-borne repeat-pass Synthetic Aperture Radar (SAR) interferometry. Given that Global Navigation Satellite System (GNSS) inaccuracies are comparable to typical radar wavelengths, especially at high-frequency bands (X-band and higher), estimating the Residual Motion Error (RME) is essential to ensure precise coregistration of Single-Look Complex (SLC) stacks and to generate high-quality repeat-pass interferograms. In this framework, traditional RME estimation techniques, such as the multisquint algorithm, often suffer performance degradation under large errors and high-decorrelation conditions, as they rely heavily on the quality of uncoregistered interferograms. To address this limitation, this paper introduces an enhanced version of the multisquint technique that solves the estimation of RME using a minimization strategy in the complex domain and uses the retrieved RMEs of the entire interferometric dataset to refine the estimates. This approach improves RME estimation robustness against large errors and decorrelation artifacts, particularly in high-frequency airborne and drone-borne SAR datasets. The proposed method is validated using a real dataset acquired with a Ku-band drone-borne SAR system, demonstrating significant improvements in coregistration accuracy. Quantitative evaluations based on interferometric coherence and phase fringe frequency metrics confirm its effectiveness, establishing the proposed refinement as a robust solution for high-precision interferometric applications.
- 30 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-20
Accurate Residual Motion Error Estimation for High-Frequency Drone-Borne SAR Interferometry
Accurate flight trajectory knowledge is crucial for airborne and drone-borne repeat-pass Synthetic Aperture Radar (SAR) interferometry. Given that Global Navigation Satellite System (GNSS) inaccuracies are comparable to typical radar wavelengths, especially at high-frequency bands (X-band and higher), estimating the Residual Motion Error (RME) is essential to ensure precise coregistration of Single-Look Complex (SLC) stacks and to generate high-quality repeat-pass interferograms. In this framework, traditional RME estimation techniques, such as the multisquint algorithm, often suffer performance degradation under large errors and high-decorrelation conditions, as they rely heavily on the quality of uncoregistered interferograms. To address this limitation, this paper introduces an enhanced version of the multisquint technique that solves the estimation of RME using a minimization strategy in the complex domain and uses the retrieved RMEs of the entire interferometric dataset to refine the estimates. This approach improves RME estimation robustness against large errors and decorrelation artifacts, particularly in high-frequency airborne and drone-borne SAR datasets. The proposed method is validated using a real dataset acquired with a Ku-band drone-borne SAR system, demonstrating significant improvements in coregistration accuracy. Quantitative evaluations based on interferometric coherence and phase fringe frequency metrics confirm its effectiveness, establishing the proposed refinement as a robust solution for high-precision interferometric applications.