Thomas Fink
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Thomas Fink has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alexia Tischberger-Aldrian
Chair of Waste Processing Technology and Waste Management, Department of Environmental and Energy Process Engineering, Technical University of Leoben, 8700 Leoben, Austria
3 shared publications - Hana Stipanovic
Waste Processing Technology and Waste Management, Department of Environmental and Energy Process Engineering, Technical University of Leoben, 8700 Leoben, Austria
3 shared publications - Christian B. Schimper
Josef Ressel Centre “Recovery Strategies for Textiles”, University of Applied Sciences Wiener Neustadt, Biotech Campus Tulln, 3430 Tulln, Austria
2 shared publications - David Lilek
Josef Ressel Centre “Recovery Strategies for Textiles”, University of Applied Sciences Wiener Neustadt, Biotech Campus Tulln, 3430 Tulln, Austria
2 shared publications - Gerald Koinig
Chair of Waste Processing Technology and Waste Management, Department of Environmental and Energy Process Engineering, Technical University of Leoben, 8700 Leoben, Austria
2 shared publications - Jeannie Egan
Josef Ressel Centre “Recovery Strategies for Textiles”, University of Applied Sciences Wiener Neustadt, Biotech Campus Tulln, 3430 Tulln, Austria
2 shared publications
Latest Publications
- Open Access
- 27 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3242
NIR Spectroscopy and Machine Learning for the Quantification of Blended Textiles: Towards Improved Understanding for Textile Recycling
Accurate quantification of cotton content is a key prerequisite for efficient textile recycling. However, it remains challenging due to material heterogeneity and technical limitations. Near-infrared spectroscopy (NIR) combined with advanced data analysis offers a rapid, non-destructive approach. However, systematic evaluations across instrument classes and analysis strategies for industrial textile sorting remain limited. In this study, a unique set of cotton/polyester blends from the same starting material with varying cotton content was analyzed using three NIR systems representing laboratory, handheld, and industrial sensor-based applications. Multiple spectral preprocessing strategies were systematically combined with partial least squares regression and advanced machine learning models. Model performance was evaluated using cross-validation and independent test sets. The benchtop NIR system delivered the highest and most consistent performance, achieving RMSEP values below 1.0% with advanced regression models. The handheld and imaging sensor system exhibited higher RMSEP values (1.2–1.6%), reflecting not only differences in preprocessing and model selection, but also intrinsic instrumental limitations. Overall, the results demonstrate that each NIR instrument class exhibits distinct strengths and limitations with respect to accuracy, sensitivity, and robustness. Consequently, instrument-specific preprocessing, models, and hyperparameters are required, and no universally transferable pipeline was identified.
- 27 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3242
Open AccessNIR Spectroscopy and Machine Learning for the Quantification of Blended Textiles: Towards Improved Understanding for Textile Recycling
Accurate quantification of cotton content is a key prerequisite for efficient textile recycling. However, it remains challenging due to material heterogeneity and technical limitations. Near-infrared spectroscopy (NIR) combined with advanced data analysis offers a rapid, non-destructive approach. However, systematic evaluations across instrument classes and analysis strategies for industrial textile sorting remain limited. In this study, a unique set of cotton/polyester blends from the same starting material with varying cotton content was analyzed using three NIR systems representing laboratory, handheld, and industrial sensor-based applications. Multiple spectral preprocessing strategies were systematically combined with partial least squares regression and advanced machine learning models. Model performance was evaluated using cross-validation and independent test sets. The benchtop NIR system delivered the highest and most consistent performance, achieving RMSEP values below 1.0% with advanced regression models. The handheld and imaging sensor system exhibited higher RMSEP values (1.2–1.6%), reflecting not only differences in preprocessing and model selection, but also intrinsic instrumental limitations. Overall, the results demonstrate that each NIR instrument class exhibits distinct strengths and limitations with respect to accuracy, sensitivity, and robustness. Consequently, instrument-specific preprocessing, models, and hyperparameters are required, and no universally transferable pipeline was identified.
- Open Access
- 9 November 2025
- Published by Elsevier in Waste Management
- Vol. 210, 115227
Effects of surface contamination on automated textile sorting using NIR-spectroscopy
- 9 November 2025
- Published by Elsevier in Waste Management
- Vol. 210, 115227
Open AccessEffects of surface contamination on automated textile sorting using NIR-spectroscopy
- Open Access
Quantifying Cotton Content in Post-Consumer Polyester/Cotton Blend Textiles via NIR Spectroscopy: Current Attainable Outcomes and Challenges in Practice
Rising volumes of textile waste necessitate the development of more efficient recycling systems, with a primary focus on the optimization of sorting technologies. Near-infrared (NIR) spectroscopy is a state-of-the-art method for fiber identification; however, its accuracy in quantifying textile blends, particularly common polyester/cotton blend textiles, still requires refinement. This study explores the potential and limitations of NIR spectroscopy for quantifying cotton content in post-consumer textiles. A lab-scale NIR sorter and a handheld NIR spectrometer in complementary wavelength ranges were applied to a diverse range of post-consumer textile samples to test model accuracies. Results show that the commonly assumed 10% accuracy threshold in industrial sorting can be exceeded, especially when excluding textiles with <35% cotton content. Identifying and excluding the range of non-linearity significantly improved the model’s performance. The final models achieved an RMSEP of 6.6% and bias of −0.9% for the NIR sorter and an RMSEP of 3.1% and bias of −0.6% for the handheld NIR spectrometer. This study also assessed how textile characteristics—such as color, structure, product type, and alkaline treatment—affect spectral behavior and model accuracy, highlighting their importance for refining quantification when high-purity inputs are needed. By identifying current limitations and potential sources of errors, this study provides a foundation for improving NIR-based models.
Open AccessQuantifying Cotton Content in Post-Consumer Polyester/Cotton Blend Textiles via NIR Spectroscopy: Current Attainable Outcomes and Challenges in Practice
Rising volumes of textile waste necessitate the development of more efficient recycling systems, with a primary focus on the optimization of sorting technologies. Near-infrared (NIR) spectroscopy is a state-of-the-art method for fiber identification; however, its accuracy in quantifying textile blends, particularly common polyester/cotton blend textiles, still requires refinement. This study explores the potential and limitations of NIR spectroscopy for quantifying cotton content in post-consumer textiles. A lab-scale NIR sorter and a handheld NIR spectrometer in complementary wavelength ranges were applied to a diverse range of post-consumer textile samples to test model accuracies. Results show that the commonly assumed 10% accuracy threshold in industrial sorting can be exceeded, especially when excluding textiles with <35% cotton content. Identifying and excluding the range of non-linearity significantly improved the model’s performance. The final models achieved an RMSEP of 6.6% and bias of −0.9% for the NIR sorter and an RMSEP of 3.1% and bias of −0.6% for the handheld NIR spectrometer. This study also assessed how textile characteristics—such as color, structure, product type, and alkaline treatment—affect spectral behavior and model accuracy, highlighting their importance for refining quantification when high-purity inputs are needed. By identifying current limitations and potential sources of errors, this study provides a foundation for improving NIR-based models.