Dmitriy Xenofontov
Research Subjects
Dmitriy Xenofontov has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Aigerim Shametova
Abylkas Saginov Karaganda Technical University
1 shared publication - Andrey Rymarov
Национальный исследовательский Московский государственный строительный университет (НИУ МГСУ)
1 shared publication - Askar Abdykadyrov
Department of Electronics, Telecommunications and Space Technologies, Satbayev University, Almaty 050013, Kazakhstan
1 shared publication - B. V. Tutenov
Almaty humanitarian and economic university
1 shared publication - Butenko A.V1 shared publication
Kassimov B.S
1 shared publication
Latest Publications
- 1 March 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (2)
Transforming renewable energy markets to accelerate carbon emission reduction
This study examines how renewable energy market development influences carbon dioxide (CO2) emissions across 18 countries in Europe and Asia from 2015 to 2024. It evaluates whether structural reforms, policy interventions, and technological innovations in the renewable energy sector (RES) accelerate national decarbonization. We employ an environmental Kuznets curve (EKC)-consistent fixed-effect panel model, embedding a difference-in-differences (DiD) design to identify policy-induced deviations from the income–emissions trajectory. Quantile-based EKC estimates facilitate complementary robustness analysis to explore distributional heterogeneity. The results indicate that countries adopting renewable energy support measures reduce CO2 emissions by approximately 8.5% relative to a control group. Renewable energy market development (LnRENO) is measured as the logarithm of the renewable energy share in total final energy consumption, while CO2 emissions are measured in logarithmic per capita terms. The coefficient for LnRENO is −1.311 (p < 0.01), confirming an inverse relationship between renewable energy market development and emissions. Economically, this implies that a 1% increase in the renewable energy share is associated with approximately a 1.3% reduction in per capita CO2 emissions, holding other factors constant. The analysis further validates the environmental Kuznets curve (EKC): income growth initially raises emissions, but beyond a threshold, higher income combined with technological advancement leads to emission reductions. This is reflected in the coefficients for LnINC (82.02) and LnINC2 (−41.5), both significant at p < 0.01. The findings show that policy for RES market development can facilitate decarbonization, particularly in institutionally mature economies, while highlighting limits to policy effectiveness in fossil-dependent contexts.
- 1 March 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (2)
Transforming renewable energy markets to accelerate carbon emission reduction
This study examines how renewable energy market development influences carbon dioxide (CO2) emissions across 18 countries in Europe and Asia from 2015 to 2024. It evaluates whether structural reforms, policy interventions, and technological innovations in the renewable energy sector (RES) accelerate national decarbonization. We employ an environmental Kuznets curve (EKC)-consistent fixed-effect panel model, embedding a difference-in-differences (DiD) design to identify policy-induced deviations from the income–emissions trajectory. Quantile-based EKC estimates facilitate complementary robustness analysis to explore distributional heterogeneity. The results indicate that countries adopting renewable energy support measures reduce CO2 emissions by approximately 8.5% relative to a control group. Renewable energy market development (LnRENO) is measured as the logarithm of the renewable energy share in total final energy consumption, while CO2 emissions are measured in logarithmic per capita terms. The coefficient for LnRENO is −1.311 (p < 0.01), confirming an inverse relationship between renewable energy market development and emissions. Economically, this implies that a 1% increase in the renewable energy share is associated with approximately a 1.3% reduction in per capita CO2 emissions, holding other factors constant. The analysis further validates the environmental Kuznets curve (EKC): income growth initially raises emissions, but beyond a threshold, higher income combined with technological advancement leads to emission reductions. This is reflected in the coefficients for LnINC (82.02) and LnINC2 (−41.5), both significant at p < 0.01. The findings show that policy for RES market development can facilitate decarbonization, particularly in institutionally mature economies, while highlighting limits to policy effectiveness in fossil-dependent contexts.
- Open Access
- 14 August 2025
- Published by Narxoz University - Non-profit joint stock company in Central Asian Economic Review
- No. 3,p. 148-161
The pension system of Kazakhstan: current state and reform directions
One of the key components of state social policy is the quality of pension provision, which reflects the level of responsibility and capability of the current government to ensure protection for citizens who have lost their ability to work due to age or health conditions.The aim of the study is to analyze the main aspects of pension provision in the Republic of Kazakhstan, identify existing problems, assess their impact on the sustainability and adequacy of the pension system, and justify the need for its reform.Research methodology. The article employs general scientific methods of inquiry, including logical and historical approaches, comparative analysis, the method of analogies, and the method of scientific abstraction. Research findings. The analysis of Kazakhstan's current pension system revealed key risks and challenges related to the adequacy of pension assignments and payments, as well as the effectiveness of managing mandatory pension contributions. The study identifies institutional shortcomings in the current pension provision model, caused by changes in the implementation of the conceptual foundations of pension reform.Originality and practical significance of the study. Based on the analysis, previously unexplored causeand-effect relationships of existing pension provision problems have been identified. The authors propose recommendations on several organizational and systemic issues, the implementation of which may contribute to improving the sustainability and adequacy of Kazakhstan’s pension model.
- 14 August 2025
- Published by Narxoz University - Non-profit joint stock company in Central Asian Economic Review
- No. 3,p. 148-161
Open AccessThe pension system of Kazakhstan: current state and reform directions
One of the key components of state social policy is the quality of pension provision, which reflects the level of responsibility and capability of the current government to ensure protection for citizens who have lost their ability to work due to age or health conditions.The aim of the study is to analyze the main aspects of pension provision in the Republic of Kazakhstan, identify existing problems, assess their impact on the sustainability and adequacy of the pension system, and justify the need for its reform.Research methodology. The article employs general scientific methods of inquiry, including logical and historical approaches, comparative analysis, the method of analogies, and the method of scientific abstraction. Research findings. The analysis of Kazakhstan's current pension system revealed key risks and challenges related to the adequacy of pension assignments and payments, as well as the effectiveness of managing mandatory pension contributions. The study identifies institutional shortcomings in the current pension provision model, caused by changes in the implementation of the conceptual foundations of pension reform.Originality and practical significance of the study. Based on the analysis, previously unexplored causeand-effect relationships of existing pension provision problems have been identified. The authors propose recommendations on several organizational and systemic issues, the implementation of which may contribute to improving the sustainability and adequacy of Kazakhstan’s pension model.
- Open Access
- 20 June 2025
- Published by Innovative Research Publishing in International Journal of Innovative Research and Scientific Studies
- Vol. 8 (5) , 721-732
Improving the aerodynamic characteristics of UAVS through the use of composite materials
This study examines the potential to improve the aerodynamic performance of unmanned aerial vehicles (UAVs) through the use of carbon-based composite materials. The main goal is to reduce structural weight while maintaining high mechanical strength and aerodynamic efficiency. Results indicate that the specific tensile strength of carbon composites ranges from 2258 to 2903 MPa/g/cm³, significantly higher than that of traditional aluminum alloys. CFD simulations showed a lift-to-drag ratio (CL/CD) of 5.4 at low speeds, with stable performance up to 100 m/s. Experimental tests revealed a decrease in vibration amplitude to 0.4 mm and deformation to 1.2%, indicating enhanced vibroacoustic stability. Owing to the material’s low density (1.55 g/cm³) and efficient force distribution, structural weight was reduced by up to 40%, resulting in a 35% increase in flight duration. A notable aspect of this work is the integrated evaluation of structural and aerodynamic parameters using CAD tools for modeling, MATLAB/Maple for calculations, and ANSYS Fluent for simulation. The findings support the viability of carbon composites for industrial-scale UAVs in defense, agriculture, and emergency operations. This research was conducted under project BR249005/0224, funded by the Committee of Science, Ministry of Science and Higher Education of the Republic of Kazakhstan.
- 20 June 2025
- Published by Innovative Research Publishing in International Journal of Innovative Research and Scientific Studies
- Vol. 8 (5) , 721-732
Open AccessImproving the aerodynamic characteristics of UAVS through the use of composite materials
This study examines the potential to improve the aerodynamic performance of unmanned aerial vehicles (UAVs) through the use of carbon-based composite materials. The main goal is to reduce structural weight while maintaining high mechanical strength and aerodynamic efficiency. Results indicate that the specific tensile strength of carbon composites ranges from 2258 to 2903 MPa/g/cm³, significantly higher than that of traditional aluminum alloys. CFD simulations showed a lift-to-drag ratio (CL/CD) of 5.4 at low speeds, with stable performance up to 100 m/s. Experimental tests revealed a decrease in vibration amplitude to 0.4 mm and deformation to 1.2%, indicating enhanced vibroacoustic stability. Owing to the material’s low density (1.55 g/cm³) and efficient force distribution, structural weight was reduced by up to 40%, resulting in a 35% increase in flight duration. A notable aspect of this work is the integrated evaluation of structural and aerodynamic parameters using CAD tools for modeling, MATLAB/Maple for calculations, and ANSYS Fluent for simulation. The findings support the viability of carbon composites for industrial-scale UAVs in defense, agriculture, and emergency operations. This research was conducted under project BR249005/0224, funded by the Committee of Science, Ministry of Science and Higher Education of the Republic of Kazakhstan.