ZWZhixuan Wang

Zhixuan Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhixuan Wang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Achieving Stable High‐Voltage All‐Solid‐State Lithium Batteries: Electrolytes, Interfaces, and Advanced Characterization

    by Wenyi Lu, Suo Li, Hang Yang, Wenhao Xu, Zhixuan Wang, Xiangrui Deng, Libo Li

    Integrating the intrinsic safety of solid‐state electrolytes and the high energy density enabled by high‐voltage cathodes, high‐voltage all‐solid‐state lithium batteries (HV‐ASSLBs) have emerged as one of the most promising next‐generation energy storage technologies. However, their practical application is hindered by the limited electrochemical stability windows of solid electrolytes and the complex physicochemical degradation reactions at the electrode‐electrolyte interfaces. This review summarizes the fundamental theories of HV‐ASSLBs, outlining the core performance evaluation metrics for solid‐state electrolytes alongside the various intrinsic degradation mechanisms responsible for their failure. These critical challenges encompass the oxidative decomposition of electrolytes, interfacial side reactions, the formation of space charge layers, lithium dendrite growth, mechanical contact failure induced by volume deformation, and gas evolution. Based on a hierarchical design strategy, recent research advances in electrolyte modification are summarized across three primary directions: bulk electrolyte optimization, cathode–electrolyte interface regulation, and anode‐electrolyte interface stabilization. Furthermore, this review introduces emerging machine learning‐assisted characterization techniques, highlighting their effectiveness in elucidating the intrinsic mechanisms of the batteries. This review aims to provide design guidelines for developing stable, safe, and high‐energy‐density HV‐ASSLBs.

  • Open Access

    Stepwise molecular and interfacial regulation of composite polymer electrolytes for balanced Li⁺ transport and stable lithium-metal batteries

    by Zhengyu Wang, Zhixuan Wang, Libo Li, Suo Li, Hang Yang, Xiangrui Deng, Wenyi Lu

    Simultaneously improving Li+ transport, mechanical robustness, and lithium-metal interfacial stability remains a major challenge for composite polymer electrolytes. Here, molecular and interfacial regulation are sequentially integrated into a fluorinated polyurethane (PU)/PVDF-HFP electrolyte to address these competing requirements. Incorporation of 2,2-difluoropropane-1,3-diol decreases the glass-transition temperature and crystallinity of PU, while the oxygen-containing PU framework provides additional Li+ coordination environments. Raman spectroscopy and molecular-dynamics analysis indicate weakened Li+–TFSI- association and increased participation of polymer oxygen sites in Li+ coordination. Further introduction of fluorosilane-modified organo-montmorillonite creates dispersed polymer–filler interfacial environments that improve ion transport while reinforcing the electrolyte matrix. The optimized composite electrolyte exhibits an ionic conductivity of 6.03 × 10-4 S cm-1, a Li+ transference number of 0.66, and an apparent activation energy of 16.0 kJ mol-1, together with a tensile strength of 4.33 MPa and an elongation at break of 149.2%. Post-cycling characterization reveals a LiF/Li3N-containing interphase and more uniform lithium deposition. Li|FOPUPL|LiFePO4 cells retain 94.8% of their capacity after 320 cycles at 2 C.These results demonstrate that coupling polymer-level coordination regulation with polymer–filler interfacial engineering provides an effective strategy for balancing ion transport, mechanical integrity, and lithium-metal interfacial stability.

  • Orbital‐Tailoring Strategy via Dual‐Defect Engineering in P‐FeTe 2‐x @NC Synergizes Polysulfide Adsorption‐Conversion for Lithium‐Sulfur Batteries

    by Suo Li, Hang Yang, Hao Tong, Wenhao Xu, Zhixuan Wang, Wenyi Lu, Xiangrui Deng, Libo Li

    The polysulfide shuttling and sluggish sulfur redox kinetics hinder the commercialization of lithium‐sulfur (Li‐S) batteries. Herein, the fabrication of phosphorus (P)‐doped iron telluride (FeTe 2 ) nanoparticles with engineered Te vacancies anchored on nitrogen (N)‐doped carbon (C) (P‐FeTe 2‐x @NC) is presented as a multifunctional sulfur host. Theoretical and experimental analyses show that Te vacancies create electron‐deficient Fe sites, which chemically anchor polysulfides through enhanced Fe─S covalent interactions. Additionally, P doping shifts the Fe d‐band center toward the Fermi level, increasing the affinity for polysulfide intermediates through d‐p orbital hybridization. This dual modulation strengthens the built‐in electric field at the P‐FeTe 2‐x /NC interface, effectively suppressing the shuttle effect and accelerating redox kinetics. The optimized P‐FeTe 2‐x @NC host enables Li‐S batteries to achieve an initial capacity of 1475.6 mAh g −1 at 0.1 C and remarkable cycling stability, exhibiting only a 0.031% capacity decay per cycle over 1000 cycles at 1 C. High sulfur utilization is evidenced by attaining 6.51 mAh cm −2 areal capacity under a loading of 7.80 mg cm −2 , while a 2.67 Ah pouch cell delivers an energy density of 326.6 Wh kg −1 . This work establishes a vacancy‐doping synergy strategy for coordinating adsorption and conversion processes in sulfur electrochemistry, offering new insights into the design of high‐energy‐density batteries.


  • Unique Design Strategies for High‐Performance Solid‐State Polymer Batteries

    by Wenhao Xu, Libo Li, Hang Yang, Suo Li, Zhixuan Wang

    Solid polymer electrolytes (SPEs) are considered a key enabler for high‐safety and high‐energy‐density solid‐state lithium‐metal batteries. However, challenges such as low ionic conductivity, poor interfacial compatibility, and limited thermal stability continue to hinder their practical application. This review explores the interaction mechanisms in SPEs in detail from four aspects—Lewis acid‐base theory, anion vacancies, hydrogen‐bond networks, and phase‐separated structures—and introduces three functionalized design strategies: channel design, high‐entropy design, and flame‐retardant design. We also comprehensively discuss the latest advancements and development potential in artificial interface design and in situ interface design. This article outlines strategies to overcome existing bottlenecks and emphasizes the importance of functional design. By modulating these microinteractions and optimizing design strategies, it will help accelerate the commercialization of high‐safety, high‐energy‐density solid‐state batteries.