Fuhao Bao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fuhao Bao has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Lei Pu
Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering, Yangtze University, Wuhan 430100, China
3 shared publications - Daicheng Peng
Key Laboratory of Exploration Technologies for Oil and Gas Resource, Ministry of Education, Yangtze University, Wuhan, China
1 shared publication - Dong Yang
Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering, Yangtze University, Wuhan 430100, China
1 shared publication - Peng Xu
College of Petroleum Engineering, Yangtze University, Wuhan 430100, China
1 shared publication
Latest Publications
- Open Access
- 5 September 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1722
Synergistic Effects of Nano-SiO2 on Emulsion Film Stability and Non-Newtonian Rheology of Offshore Oil-Based Drilling Fluids
The ocean harbors vast potential for oil and gas resources, positioning offshore drilling as a critical approach for future energy exploration. However, high-temperature and high-pressure offshore reservoirs present formidable challenges, as conventional water-based drilling fluids are prone to thermal degradation and rheological instability, leading to wellbore collapse and stuck-pipe incidents. Offshore oil-based drilling fluids (OBDFs), typically water-in-oil emulsions, offer advantages in wellbore stability, lubricity, and contamination resistance, yet their stability under extreme high-temperature conditions remains limited. This study reveals the enhancement of offshore OBDFs performance in harsh conditions by employing nano-SiO2 to synergistically improve emulsion film stability and non-Newtonian rheological behavior while systematically elucidating the underlying mechanisms. Nano-SiO2 forms a composite film with emulsifiers, reducing droplet size, enhancing mechanical strength, and increasing thermal stability. Optimal stability was observed at an oil-to-water ratio of 7:3 with 2.5% nano-SiO2 dispersion and 4.0% emulsifier. Rheological analyses revealed that nano-silica enhances electrostatic repulsion, reduces plastic viscosity, establishes a network structure that increases yield stress, and promotes pronounced shear-thinning behavior. Macroscopic evaluations, including fluid loss, rheological performance, and electrical stability, further confirmed the improved high-temperature stability of offshore OBDFs with nano-SiO2 at reduced emulsifier concentrations. These findings provide a theoretical basis for optimizing offshore OBDFs formulations and their field performance, offering breakthrough technological support for safe and efficient drilling in ultra-high-temperature offshore reservoirs.
- 5 September 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1722
Open AccessSynergistic Effects of Nano-SiO2 on Emulsion Film Stability and Non-Newtonian Rheology of Offshore Oil-Based Drilling Fluids
The ocean harbors vast potential for oil and gas resources, positioning offshore drilling as a critical approach for future energy exploration. However, high-temperature and high-pressure offshore reservoirs present formidable challenges, as conventional water-based drilling fluids are prone to thermal degradation and rheological instability, leading to wellbore collapse and stuck-pipe incidents. Offshore oil-based drilling fluids (OBDFs), typically water-in-oil emulsions, offer advantages in wellbore stability, lubricity, and contamination resistance, yet their stability under extreme high-temperature conditions remains limited. This study reveals the enhancement of offshore OBDFs performance in harsh conditions by employing nano-SiO2 to synergistically improve emulsion film stability and non-Newtonian rheological behavior while systematically elucidating the underlying mechanisms. Nano-SiO2 forms a composite film with emulsifiers, reducing droplet size, enhancing mechanical strength, and increasing thermal stability. Optimal stability was observed at an oil-to-water ratio of 7:3 with 2.5% nano-SiO2 dispersion and 4.0% emulsifier. Rheological analyses revealed that nano-silica enhances electrostatic repulsion, reduces plastic viscosity, establishes a network structure that increases yield stress, and promotes pronounced shear-thinning behavior. Macroscopic evaluations, including fluid loss, rheological performance, and electrical stability, further confirmed the improved high-temperature stability of offshore OBDFs with nano-SiO2 at reduced emulsifier concentrations. These findings provide a theoretical basis for optimizing offshore OBDFs formulations and their field performance, offering breakthrough technological support for safe and efficient drilling in ultra-high-temperature offshore reservoirs.
- Open Access
Experimental Study on a Coupled Plugging System of Nano-Enhanced Polymer Gel and Bridging Solids for Severe Lost Circulation
With the advancement of oil and gas exploration and development technologies into deeper and ultra-deep reservoirs, complex geological conditions here render them highly susceptible to severe lost circulation. However, conventional bridging plugging methods struggle with large-sized lost circulation channels, while chemical gel plugging faces challenges such as low success rates and insufficient pressure-bearing capacity. To address this, a novel leak plugging method combining bridging and gel plugging is proposed herein. From structural stability and mechanical properties perspectives, the enhancing effect of nanomaterials on the gel system is revealed, and the synergistic mechanism of gel-bridging coupled plugging is elucidated. For the experimental setup, orthogonal experiments determined a base formulation with controllable gelation time: 10 wt% main agent, 2 wt% crosslinking agent, and a 1:3 pH regulator ratio. Introducing 1.0 wt% nanosilica enhanced gel properties, achieving 30 N strength at 120 °C aging. An optimized walnut shell bridging agent constructed the supporting skeleton, yielding a coupled plugging formulation with up to 8 MPa pressure for a 7 mm fracture. Lost circulation volume is controlled at 163 mL, outperforming single plugging methods. Research results demonstrate gel-bridging coupled plugging’s advantages for large fractures, providing new technical insights for severe lost circulation field construction.
Open AccessExperimental Study on a Coupled Plugging System of Nano-Enhanced Polymer Gel and Bridging Solids for Severe Lost Circulation
With the advancement of oil and gas exploration and development technologies into deeper and ultra-deep reservoirs, complex geological conditions here render them highly susceptible to severe lost circulation. However, conventional bridging plugging methods struggle with large-sized lost circulation channels, while chemical gel plugging faces challenges such as low success rates and insufficient pressure-bearing capacity. To address this, a novel leak plugging method combining bridging and gel plugging is proposed herein. From structural stability and mechanical properties perspectives, the enhancing effect of nanomaterials on the gel system is revealed, and the synergistic mechanism of gel-bridging coupled plugging is elucidated. For the experimental setup, orthogonal experiments determined a base formulation with controllable gelation time: 10 wt% main agent, 2 wt% crosslinking agent, and a 1:3 pH regulator ratio. Introducing 1.0 wt% nanosilica enhanced gel properties, achieving 30 N strength at 120 °C aging. An optimized walnut shell bridging agent constructed the supporting skeleton, yielding a coupled plugging formulation with up to 8 MPa pressure for a 7 mm fracture. Lost circulation volume is controlled at 163 mL, outperforming single plugging methods. Research results demonstrate gel-bridging coupled plugging’s advantages for large fractures, providing new technical insights for severe lost circulation field construction.
- Open Access
- 5 August 2025
- Published by MDPI AG in Preprints.org
Experimental Study on a Coupled Plugging System of Nano-Enhanced Polymer Gel and Bridging Solids for Severe Lost Circulation
With the advancement of oil and gas exploration and development technologies into deeper and ultra-deep reservoirs, complex geological conditions here render them highly susceptible to severe lost circulation. However, conventional bridging plugging methods struggle with large-sized lost circulation channels, while chemical gel plugging faces challenges like low success rates and insufficient pressure-bearing capacity. To address this, a novel leak plugging method combining bridging and gel plugging is proposed herein. From structural stability and mechanical properties perspectives, the enhancing effect of nanomaterials on the gel system is revealed, and the synergistic mechanism of coupled plugging is elucidated. For experimental setup, orthogonal experiments determined a base formulation with controllable gelation time: 10 wt% main agent, 2 wt% crosslinking agent, and 1:1 pH regulator ratio. Introducing 1.0 wt% nanosilica enhanced gel properties, achieving 30 N strength at 120°C aging. An optimized walnut shell bridging agent constructed the supporting skeleton, yielding a coupled plugging formulation with up to 8 MPa pressure for a 7 mm fracture. Lost circulation volume is controlled at 163 mL, outperforming single plugging methods. Research results demonstrate gel-bridging coupled plugging’s advantages for large fractures, providing new technical insights for severe lost circulation field construction.
- 5 August 2025
- Published by MDPI AG in Preprints.org
Open AccessExperimental Study on a Coupled Plugging System of Nano-Enhanced Polymer Gel and Bridging Solids for Severe Lost Circulation
With the advancement of oil and gas exploration and development technologies into deeper and ultra-deep reservoirs, complex geological conditions here render them highly susceptible to severe lost circulation. However, conventional bridging plugging methods struggle with large-sized lost circulation channels, while chemical gel plugging faces challenges like low success rates and insufficient pressure-bearing capacity. To address this, a novel leak plugging method combining bridging and gel plugging is proposed herein. From structural stability and mechanical properties perspectives, the enhancing effect of nanomaterials on the gel system is revealed, and the synergistic mechanism of coupled plugging is elucidated. For experimental setup, orthogonal experiments determined a base formulation with controllable gelation time: 10 wt% main agent, 2 wt% crosslinking agent, and 1:1 pH regulator ratio. Introducing 1.0 wt% nanosilica enhanced gel properties, achieving 30 N strength at 120°C aging. An optimized walnut shell bridging agent constructed the supporting skeleton, yielding a coupled plugging formulation with up to 8 MPa pressure for a 7 mm fracture. Lost circulation volume is controlled at 163 mL, outperforming single plugging methods. Research results demonstrate gel-bridging coupled plugging’s advantages for large fractures, providing new technical insights for severe lost circulation field construction.