Liucheng Hao
Liucheng Hao has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Duanpeng Yuan
Pinggao Group Co., Ltd., Zhengzhou 450046, China
1 shared publication - Jianying Zhong
School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, China
1 shared publication - Mengjie Sun
Pinggao Group Co., Ltd., Zhengzhou 450046, China
1 shared publication - Xin Lin
Shenyang University of Technology
1 shared publication - Yaxiang Wang
Pinggao Group Co., Ltd., Zhengzhou 450046, China
1 shared publication - Ye Zhao
Pinggao Group Co., Ltd., Zhengzhou 450046, China
1 shared publication
Latest Publications
- Open Access
High-Performance Al2O3/Epoxy Resin Composites for Insulating Pull Rods of Direct Current High-Speed Switches
Benefiting from their good mechanical and electrical properties, epoxy resin materials are widely utilized in the field of high-voltage electrical insulation devices. However, with the increase in voltage levels of equipment, the epoxy resin materials used for insulating pull rods in high-voltage electrical equipment are facing increasingly severe challenges. This study enhanced the mechanical and insulating properties of epoxy resin materials by molecular structure regulation, composite incorporation and formula optimization. The tensile strength, bending strength and impact strength of the epoxy resin materials with molecular structure regulation increased by 20.6%, 8.5% and 42.1%. The breakdown strength successfully increased from 27.6 kV/mm to 29.9 kV/mm. After combining with the modified Al2O3 nanofillers, the breakdown strength, surface resistivity and volumetric resistivity of the composite further improved to 35.8 kV/mm, 2.7 × 1016 Ω and 5.8 × 1017 Ω·cm. The insulating pull rod prepared by this method achieved a flashover voltage of 18.5 kV, meeting the requirements for both insulating and mechanical performance of a prototype of 200 kV high-voltage direct current floor tank-type high-speed mechanical switch. This study can provide important support for the optimization of epoxy resin material formulation design and the development of epoxy-resin-insulating pull rods.
Open AccessHigh-Performance Al2O3/Epoxy Resin Composites for Insulating Pull Rods of Direct Current High-Speed Switches
Benefiting from their good mechanical and electrical properties, epoxy resin materials are widely utilized in the field of high-voltage electrical insulation devices. However, with the increase in voltage levels of equipment, the epoxy resin materials used for insulating pull rods in high-voltage electrical equipment are facing increasingly severe challenges. This study enhanced the mechanical and insulating properties of epoxy resin materials by molecular structure regulation, composite incorporation and formula optimization. The tensile strength, bending strength and impact strength of the epoxy resin materials with molecular structure regulation increased by 20.6%, 8.5% and 42.1%. The breakdown strength successfully increased from 27.6 kV/mm to 29.9 kV/mm. After combining with the modified Al2O3 nanofillers, the breakdown strength, surface resistivity and volumetric resistivity of the composite further improved to 35.8 kV/mm, 2.7 × 1016 Ω and 5.8 × 1017 Ω·cm. The insulating pull rod prepared by this method achieved a flashover voltage of 18.5 kV, meeting the requirements for both insulating and mechanical performance of a prototype of 200 kV high-voltage direct current floor tank-type high-speed mechanical switch. This study can provide important support for the optimization of epoxy resin material formulation design and the development of epoxy-resin-insulating pull rods.