Luxi Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luxi Wang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Jianmin Gao
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China
2 shared publications - Waqar Ahmed Qureshi
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China
1 shared publication - Weijie Wu
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China
1 shared publication
Latest Publications
- Open Access
Study on the Mechanism of Urea Arch Breaking in Vibrating Fertiliser Dischargers Based on EDEM
Urea discharge can become unstable as interparticle cohesion increases under moisture-affected conditions. This study combined bulk-solid mechanics, discrete element method (DEM) simulations, contact parameter calibration, and bench testing to investigate urea arching and vibration-assisted discharge. Dry-contact parameters for urea particles and a polypropylene (PP) hopper were calibrated using angle-of-repose and sliding tests. The calibrated simulations differed from the physical target values by 1.71% for the angle of repose and 3.98% for the sliding friction angle. In a separate DEM sensitivity analysis, JKR surface energy was prescribed at 0, 0.05, 0.15, and 0.30 J·m−2 as an effective adhesion parameter rather than as a calibrated moisture state. The maximum EDEM-exported Total Force signal increased from 2.283 N at 0 J·m−2 to 2.704 N at 0.30 J·m−2 (18.5%), whereas the mean particle velocity during the common 5–18 s pre-discharge interval decreased from 0.0613 to 0.0397 m·s−1 (35.3%). Two combined excitation settings were evaluated: 29.17 Hz/0.2 mm and 58.33 Hz/1.2 mm. Because frequency and amplitude changed simultaneously, their individual effects could not be isolated. The bench tests yielded mean discharged masses of 566.808, 492.435, and 464.305 g for the 58.33 Hz/1.2 mm, 29.17 Hz/0.2 mm, and non-vibrating conditions, respectively. The 58.33 Hz/1.2 mm setting increased the mean mass discharged during the 30 s collection interval by approximately 22.1% relative to the non-vibrating control. The corresponding between-run coefficients of variation were 3.628%, 3.580%, and 4.303%; these values describe repeatability between replicate runs rather than temporal or spatial discharge uniformity. Overall, increasing prescribed adhesion reduced particle mobility in the DEM simulations, whereas the 58.33 Hz/1.2 mm combined excitation increased discharged mass under the tested conditions. The experiments do not directly demonstrate crystal bridge rupture or isolate an independent frequency effect.
Open AccessStudy on the Mechanism of Urea Arch Breaking in Vibrating Fertiliser Dischargers Based on EDEM
Urea discharge can become unstable as interparticle cohesion increases under moisture-affected conditions. This study combined bulk-solid mechanics, discrete element method (DEM) simulations, contact parameter calibration, and bench testing to investigate urea arching and vibration-assisted discharge. Dry-contact parameters for urea particles and a polypropylene (PP) hopper were calibrated using angle-of-repose and sliding tests. The calibrated simulations differed from the physical target values by 1.71% for the angle of repose and 3.98% for the sliding friction angle. In a separate DEM sensitivity analysis, JKR surface energy was prescribed at 0, 0.05, 0.15, and 0.30 J·m−2 as an effective adhesion parameter rather than as a calibrated moisture state. The maximum EDEM-exported Total Force signal increased from 2.283 N at 0 J·m−2 to 2.704 N at 0.30 J·m−2 (18.5%), whereas the mean particle velocity during the common 5–18 s pre-discharge interval decreased from 0.0613 to 0.0397 m·s−1 (35.3%). Two combined excitation settings were evaluated: 29.17 Hz/0.2 mm and 58.33 Hz/1.2 mm. Because frequency and amplitude changed simultaneously, their individual effects could not be isolated. The bench tests yielded mean discharged masses of 566.808, 492.435, and 464.305 g for the 58.33 Hz/1.2 mm, 29.17 Hz/0.2 mm, and non-vibrating conditions, respectively. The 58.33 Hz/1.2 mm setting increased the mean mass discharged during the 30 s collection interval by approximately 22.1% relative to the non-vibrating control. The corresponding between-run coefficients of variation were 3.628%, 3.580%, and 4.303%; these values describe repeatability between replicate runs rather than temporal or spatial discharge uniformity. Overall, increasing prescribed adhesion reduced particle mobility in the DEM simulations, whereas the 58.33 Hz/1.2 mm combined excitation increased discharged mass under the tested conditions. The experiments do not directly demonstrate crystal bridge rupture or isolate an independent frequency effect.
- Open Access
Evolution and Application of Precision Fertilizer: A Review
This paper reviews technological advances in precision fertilizer application from 2020 to 2025, addressing the need for a systematic synthesis of recent innovations to support agricultural sustainability. With precision fertilization critical for efficient resource use, rapid technological progress in this field has highlighted a gap in consolidated overviews of post-2020 developments. The review focuses on three core areas: device innovation, intelligent control optimization, and simulation-driven parameter refinement. Key advancements include structural improvements in fertilizer applicators (e.g., multi-segment arc and variable-diameter designs) enhancing discharge uniformity and accuracy; integration of algorithms like PSO, fuzzy logic, and RBFNN (e.g., PSO-RBF-PID reducing flow control errors) boosting control precision; and DEM/CFD simulations optimizing device parameters. These technologies, applied in scenarios from drone-based unmanned operations to automatic targeting systems, have shown potential in reducing fertilizer use and increasing crop yields. This synthesis clarifies recent progress, offering insights for green agricultural development. Note that a few pre-2020 references are included for foundational context, ensuring completeness.
Open AccessEvolution and Application of Precision Fertilizer: A Review
This paper reviews technological advances in precision fertilizer application from 2020 to 2025, addressing the need for a systematic synthesis of recent innovations to support agricultural sustainability. With precision fertilization critical for efficient resource use, rapid technological progress in this field has highlighted a gap in consolidated overviews of post-2020 developments. The review focuses on three core areas: device innovation, intelligent control optimization, and simulation-driven parameter refinement. Key advancements include structural improvements in fertilizer applicators (e.g., multi-segment arc and variable-diameter designs) enhancing discharge uniformity and accuracy; integration of algorithms like PSO, fuzzy logic, and RBFNN (e.g., PSO-RBF-PID reducing flow control errors) boosting control precision; and DEM/CFD simulations optimizing device parameters. These technologies, applied in scenarios from drone-based unmanned operations to automatic targeting systems, have shown potential in reducing fertilizer use and increasing crop yields. This synthesis clarifies recent progress, offering insights for green agricultural development. Note that a few pre-2020 references are included for foundational context, ensuring completeness.