Lihle Mdleleni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lihle Mdleleni has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Tobeka Naki
Department of Chemistry, University of Fort Hare, Private Bag X1314, Alice 5700, South Africa
3 shared publications - Edson Leroy Meyer
Fort Hare Institute of Technology, University of Fort Hare, Private Bag x1314, Alice 5700, South Africa
2 shared publications - Mojeed Adedoyin Agoro
Fort Hare Institute of Technology, University of Fort Hare, Private Bag x1314, Alice 5700, South Africa
2 shared publications - Nicholas Rono
Fort Hare Institute of Technology, University of Fort Hare, Private Bag x1314, Alice 5700, South Africa
2 shared publications - Sithenkosi Mlala
Department of Chemistry, University of Fort Hare, Private Bag X1314, Alice 5700, South Africa
2 shared publications - Pamela Rungqu
Department of Earth and Chemical Sciences, Chemistry Discipline, University of Fort Hare, Alice 5700, Eastern Cape, South Africa
1 shared publication
Latest Publications
- Open Access
- 8 February 2026
- Published by MDPI AG in Antibiotics
- Vol. 15 (2) , 185
Recent Advances in the Development of Selected Triterpenoid-Based Hybrid Molecules and Their Antimicrobial Activities: A Review
Triterpenoids are a diverse class of naturally occurring compounds with a wide range of pharmacological properties, including anticancer, anti-inflammatory, antimicrobial, and antiviral activities. Among them, ursolic acid (UA), oleanolic acid (OA), and betulinic acid (BA) have emerged as key scaffolds due to their broad therapeutic potential and structural versatility. However, the clinical application of these compounds is often limited by issues such as poor solubility, bioavailability, and selectivity. To address these challenges, research conducted between 2015 and 2025 increasingly focused on the development of triterpenoid-based hybrid molecules, in which the triterpenoid scaffolds are chemically linked to other bioactive pharmacophores. This approach aims to enhance therapeutic efficacy through synergistic action, improved pharmacokinetics, and multitarget interactions. This comprehensive review explores recent advancements in the design, synthesis, and evaluation of hybrid derivatives of selected triterpenoids, particularly UA, OA, and BA. Emphasis is placed on the structure–activity relationships (SARs), biological evaluations, and mechanisms of action of these hybrid compounds across various disease models. The review also highlights current challenges, research gaps, and future perspectives in the rational development of triterpenoid-based hybrids as potential leading candidates in drug discovery.
- 8 February 2026
- Published by MDPI AG in Antibiotics
- Vol. 15 (2) , 185
Open AccessRecent Advances in the Development of Selected Triterpenoid-Based Hybrid Molecules and Their Antimicrobial Activities: A Review
Triterpenoids are a diverse class of naturally occurring compounds with a wide range of pharmacological properties, including anticancer, anti-inflammatory, antimicrobial, and antiviral activities. Among them, ursolic acid (UA), oleanolic acid (OA), and betulinic acid (BA) have emerged as key scaffolds due to their broad therapeutic potential and structural versatility. However, the clinical application of these compounds is often limited by issues such as poor solubility, bioavailability, and selectivity. To address these challenges, research conducted between 2015 and 2025 increasingly focused on the development of triterpenoid-based hybrid molecules, in which the triterpenoid scaffolds are chemically linked to other bioactive pharmacophores. This approach aims to enhance therapeutic efficacy through synergistic action, improved pharmacokinetics, and multitarget interactions. This comprehensive review explores recent advancements in the design, synthesis, and evaluation of hybrid derivatives of selected triterpenoids, particularly UA, OA, and BA. Emphasis is placed on the structure–activity relationships (SARs), biological evaluations, and mechanisms of action of these hybrid compounds across various disease models. The review also highlights current challenges, research gaps, and future perspectives in the rational development of triterpenoid-based hybrids as potential leading candidates in drug discovery.
- Open Access
Simulation of Perovskite Solar Cell with BaZr(S0.6Se0.4)3–Based Absorber Using SCAPS–1D
The increasing impact of global warming is predominantly driven by the extensive use of fossil fuels, which release significant amounts of greenhouse gases into the atmosphere. This has led to a critical need for alternative, sustainable energy sources that can mitigate environmental impacts. Photovoltaic technology has emerged as a promising solution by harnessing renewable energy from the sun, providing a clean and inexhaustible power source. Perovskite solar cells (PSCs) are a class of hybrid organic–inorganic solar cells that have recently attracted significant scientific attention due to their low cost, relatively high efficiency, low–temperature processing routes, and longer carrier lifetimes. These characteristics make them a viable alternative to traditional fossil fuels, reducing the carbon footprint and contributing to the fight against global warming. In this study, the SCAPS–1D numerical simulator was used in the computational analysis of a PSC device with the configuration FTO/ETL/BaZr(S0.6Se0.4)3/HTL/Ir. Different hole transport layer (HTL) and electron transport layer (ETL) material were proposed and tested. The HTL materials included copper (I) oxide (Cu2O), 2,2′,7,7′–Tetrakis(N,N–di–p–methoxyphenylamine)9,9′–spirobifluorene (spiro–OMETAD), and poly(3–hexylthiophene) (P3HT), while the ETLs included cadmium suphide (CdS), zinc oxide (ZnO), and [6,6]–phenyl–C61–butyric acid methyl ester (PCBM). Finally, BaZr(S0.6Se0.4)3 was proposed as an absorber, and a fluorine–doped tin oxide glass substrate (FTO) was proposed as an anode. The metal back contact used was iridium. Photovoltaic parameters such as short circuit density (Isc), open circuit voltage (Voc), fill factor (FF), and power conversion efficiency (PCE) were used to evaluate the performance of the device. The initial simulated primary device with the configuration FTO/CdS/BaZr(S0.6Se0.4)3/spiro–OMETAD/Ir gave a PCE of 5.75%. Upon testing different HTL materials, the best HTL was found to be Cu2O, and the PCE improved to 9.91%. Thereafter, different ETLs were also inserted and tested, and the best ETL was established to be ZnO, with a PCE of 10.10%. Ultimately an optimized device with a configuration of FTO/ZnO/BaZr(S0.6Se0.4)3/Cu2O/Ir was achieved. The other photovoltaic parameters for the optimized device were as follows: FF = 31.93%, Jsc = 14.51 mA cm−2, and Voc = 2.18 V. The results of this study will promote the use of environmentally benign BaZr(S0.6Se0.4)3–based absorber materials in PSCs for improved performance and commercialization.
Open AccessSimulation of Perovskite Solar Cell with BaZr(S0.6Se0.4)3–Based Absorber Using SCAPS–1D
The increasing impact of global warming is predominantly driven by the extensive use of fossil fuels, which release significant amounts of greenhouse gases into the atmosphere. This has led to a critical need for alternative, sustainable energy sources that can mitigate environmental impacts. Photovoltaic technology has emerged as a promising solution by harnessing renewable energy from the sun, providing a clean and inexhaustible power source. Perovskite solar cells (PSCs) are a class of hybrid organic–inorganic solar cells that have recently attracted significant scientific attention due to their low cost, relatively high efficiency, low–temperature processing routes, and longer carrier lifetimes. These characteristics make them a viable alternative to traditional fossil fuels, reducing the carbon footprint and contributing to the fight against global warming. In this study, the SCAPS–1D numerical simulator was used in the computational analysis of a PSC device with the configuration FTO/ETL/BaZr(S0.6Se0.4)3/HTL/Ir. Different hole transport layer (HTL) and electron transport layer (ETL) material were proposed and tested. The HTL materials included copper (I) oxide (Cu2O), 2,2′,7,7′–Tetrakis(N,N–di–p–methoxyphenylamine)9,9′–spirobifluorene (spiro–OMETAD), and poly(3–hexylthiophene) (P3HT), while the ETLs included cadmium suphide (CdS), zinc oxide (ZnO), and [6,6]–phenyl–C61–butyric acid methyl ester (PCBM). Finally, BaZr(S0.6Se0.4)3 was proposed as an absorber, and a fluorine–doped tin oxide glass substrate (FTO) was proposed as an anode. The metal back contact used was iridium. Photovoltaic parameters such as short circuit density (Isc), open circuit voltage (Voc), fill factor (FF), and power conversion efficiency (PCE) were used to evaluate the performance of the device. The initial simulated primary device with the configuration FTO/CdS/BaZr(S0.6Se0.4)3/spiro–OMETAD/Ir gave a PCE of 5.75%. Upon testing different HTL materials, the best HTL was found to be Cu2O, and the PCE improved to 9.91%. Thereafter, different ETLs were also inserted and tested, and the best ETL was established to be ZnO, with a PCE of 10.10%. Ultimately an optimized device with a configuration of FTO/ZnO/BaZr(S0.6Se0.4)3/Cu2O/Ir was achieved. The other photovoltaic parameters for the optimized device were as follows: FF = 31.93%, Jsc = 14.51 mA cm−2, and Voc = 2.18 V. The results of this study will promote the use of environmentally benign BaZr(S0.6Se0.4)3–based absorber materials in PSCs for improved performance and commercialization.
- Open Access
Characterization of Perfluoro Sulfonic Acid Membranes for Potential Electrolytic Hydrogen Production and Fuel Cell Applications for Local and Global Green Hydrogen Economy
Fuel cells have become a fundamental technology in the development of clean energy systems, playing a vital role in the global shift toward a low-carbon future. With the growing need for sustainable hydrogen production, perfluoro sulfonic acid (PFSA) ionomer membranes play a critical role in optimizing green hydrogen technologies and fuel cells. This study aims to investigate the effects of different environmental and solvent treatments on the chemical and physical properties of Nafion N−115 membranes to evaluate their suitability for both hydrogen production in proton exchange membrane (PEM) electrolyzers and hydrogen utilization in fuel cells, supporting integrated applications in the local and global green hydrogen economy. To achieve this, Nafion N−115 membranes were partially dissolved in various solvent mixtures, including ethanol/isopropanol (EI), isopropanol/water (IW), dimethylformamide/N-methyl-2-pyrrolidone (DN), and ethanol/methanol/isopropanol (EMI), evaluated under water immersion and thermal stress, and characterized for chemical stability, mechanical strength, water uptake, and proton conductivity using advanced electrochemical and spectroscopic techniques. The results demonstrated that the EMI-treated membrane showed the highest proton conductivity and maintained its structural integrity, making it the most promising for hydrogen electrolysis applications. Conversely, the DN-treated membrane exhibited reduced stability and lower conductivity due to solvent-induced degradation. This study highlights the potential of EMI as an optimal solvent mixture for enhancing PFSA membranes performance in green hydrogen production, contributing to the advancement of sustainable energy solutions.
Open AccessCharacterization of Perfluoro Sulfonic Acid Membranes for Potential Electrolytic Hydrogen Production and Fuel Cell Applications for Local and Global Green Hydrogen Economy
Fuel cells have become a fundamental technology in the development of clean energy systems, playing a vital role in the global shift toward a low-carbon future. With the growing need for sustainable hydrogen production, perfluoro sulfonic acid (PFSA) ionomer membranes play a critical role in optimizing green hydrogen technologies and fuel cells. This study aims to investigate the effects of different environmental and solvent treatments on the chemical and physical properties of Nafion N−115 membranes to evaluate their suitability for both hydrogen production in proton exchange membrane (PEM) electrolyzers and hydrogen utilization in fuel cells, supporting integrated applications in the local and global green hydrogen economy. To achieve this, Nafion N−115 membranes were partially dissolved in various solvent mixtures, including ethanol/isopropanol (EI), isopropanol/water (IW), dimethylformamide/N-methyl-2-pyrrolidone (DN), and ethanol/methanol/isopropanol (EMI), evaluated under water immersion and thermal stress, and characterized for chemical stability, mechanical strength, water uptake, and proton conductivity using advanced electrochemical and spectroscopic techniques. The results demonstrated that the EMI-treated membrane showed the highest proton conductivity and maintained its structural integrity, making it the most promising for hydrogen electrolysis applications. Conversely, the DN-treated membrane exhibited reduced stability and lower conductivity due to solvent-induced degradation. This study highlights the potential of EMI as an optimal solvent mixture for enhancing PFSA membranes performance in green hydrogen production, contributing to the advancement of sustainable energy solutions.