Eva Furtado de Sousa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eva Furtado de Sousa has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Maria Alexsandra de Sousa Rios
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
2 shared publications - Bruna Sousa
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
1 shared publication - Celio Loureiro Cavalcante
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
1 shared publication - Débora Hellen Almeida de Brito
Department of Mechanical Engineering, Center of Technology, Federal University of Ceará, Fortaleza 60440-554, CE, Brazil
1 shared publication - Francisco Assis Bezerra da Cunha
Graduate Program in Biological Chemistry (PPQB), Regional University of Cariri (URCA), Crato, Brazil
1 shared publication - Francisco Murilo Tavares Luna
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
1 shared publication
Latest Publications
- Open Access
Structural and Chemical Characterization of Carnauba Stalk Biochar (Copernicia prunifera) and Its Application in Methylene Blue Adsorption
The improper discharge of industrial effluents containing dyes, such as methylene blue, represents a serious environmental problem. The present study, therefore, aimed to evaluate the potential of biochar derived from carnauba stalks as an adsorbent for removing dyes from aqueous media. The raw stalks were subjected to carbonization under an inert atmosphere to yield biochar, and both materials were characterized by proximate and elemental analyses, SEM/EDS, PSD, XRD, FTIR, and thermal analyses. Batch adsorption experiments were monitored by UV-Vis spectrophotometry. Pyrolysis resulted in an increase in aromatic fixed carbon (+26.5%) and ash content (+23.8%), while simultaneously reducing volatile matter (−39.3%), moisture, and the atomic H/C (0.39) and O/C (0.07) ratios. Furthermore, thermal stability was enhanced without causing a significant alteration to the average particle size (~30 μm). Adsorption tests showed a maximum uptake of 32.5 mg∙g−1 at low dosage (2 mg), corresponding to 8.66% removal, while 27.83% removal was achieved at higher dosage (25 mg). Equilibrium data were best described by the Langmuir model (qm = 210.7 mg∙g−1; R2 = 0.971), with qm representing a theoretical fitting parameter. These findings of this study demonstrate the adsorption potential of carnauba stalk biochar and support its evaluation as a lignocellulosic material for dye removal applications.
Open AccessStructural and Chemical Characterization of Carnauba Stalk Biochar (Copernicia prunifera) and Its Application in Methylene Blue Adsorption
The improper discharge of industrial effluents containing dyes, such as methylene blue, represents a serious environmental problem. The present study, therefore, aimed to evaluate the potential of biochar derived from carnauba stalks as an adsorbent for removing dyes from aqueous media. The raw stalks were subjected to carbonization under an inert atmosphere to yield biochar, and both materials were characterized by proximate and elemental analyses, SEM/EDS, PSD, XRD, FTIR, and thermal analyses. Batch adsorption experiments were monitored by UV-Vis spectrophotometry. Pyrolysis resulted in an increase in aromatic fixed carbon (+26.5%) and ash content (+23.8%), while simultaneously reducing volatile matter (−39.3%), moisture, and the atomic H/C (0.39) and O/C (0.07) ratios. Furthermore, thermal stability was enhanced without causing a significant alteration to the average particle size (~30 μm). Adsorption tests showed a maximum uptake of 32.5 mg∙g−1 at low dosage (2 mg), corresponding to 8.66% removal, while 27.83% removal was achieved at higher dosage (25 mg). Equilibrium data were best described by the Langmuir model (qm = 210.7 mg∙g−1; R2 = 0.971), with qm representing a theoretical fitting parameter. These findings of this study demonstrate the adsorption potential of carnauba stalk biochar and support its evaluation as a lignocellulosic material for dye removal applications.
- Open Access
Macauba Kernel Oil: Refining, Transesterification, and Density/Viscosity of Blends B15 to B20 with Mineral Diesel
Macauba is a versatile palm and has been explored in various sectors due to its ability to produce oils, proteins, energy, and biofuels. This paper presents the extraction, refining, and characterization of the macauba kernel oil, the synthesis of biodiesel, and an evaluation of the density and viscosity of its blends with mineral diesel, ranging from B15 to B20. Conversion was determined using the integral areas of the 1H NMR spectrum for the FAME methyl ester (3.62, -CH3) and FAME carbonyl (2.26, -COOCH2). Predictions of the key inputs required for the extraction and degumming of the macauba kernel oil, as well as for the biodiesel production, are also presented. These results provide valuable insights into diesel-biodiesel blends exceeding 14% (vol.) of biodiesel, thereby contributing to the expansion of the biofuels industry.
Open AccessMacauba Kernel Oil: Refining, Transesterification, and Density/Viscosity of Blends B15 to B20 with Mineral Diesel
Macauba is a versatile palm and has been explored in various sectors due to its ability to produce oils, proteins, energy, and biofuels. This paper presents the extraction, refining, and characterization of the macauba kernel oil, the synthesis of biodiesel, and an evaluation of the density and viscosity of its blends with mineral diesel, ranging from B15 to B20. Conversion was determined using the integral areas of the 1H NMR spectrum for the FAME methyl ester (3.62, -CH3) and FAME carbonyl (2.26, -COOCH2). Predictions of the key inputs required for the extraction and degumming of the macauba kernel oil, as well as for the biodiesel production, are also presented. These results provide valuable insights into diesel-biodiesel blends exceeding 14% (vol.) of biodiesel, thereby contributing to the expansion of the biofuels industry.