Katrin Markuske
Research Subjects
Katrin Markuske has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Tobias Fieback
Professorship of Technical Thermodynamics, Institute of Thermal Engineering, TU Bergakademie Freiberg, Gustav-Zeuner-Str. 7, 09599 Freiberg, Saxony, Germany
3 shared publications - Kabriil Khajryan2 shared publications
Michael Kühn
2 shared publications- Olga Ravkina2 shared publications
- Ralf Kriegel
Fraunhofer Institut für Keramische Technologien und Systeme IKTS Michael‐Faraday‐Str. 1 07629 Hermsdorf Germany
2 shared publications - Thomas Storch
Helmholtz Institute Freiberg for Resource Technology
2 shared publications
Latest Publications
- Open Access
- 17 September 2026
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 28
Oxygen production in a packed-bed system using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) mini-honeycomb oxygen storage materials and steam as sweep gas
- 17 September 2026
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 28
Open AccessOxygen production in a packed-bed system using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) mini-honeycomb oxygen storage materials and steam as sweep gas
- Open Access
- 26 June 2026
- Published by Elsevier in SSRN Electronic Journal
Oxygen Production in a Packed-Bed System Using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) Mini-Honeycomb Oxygen Storage Materials and Steam as Sweep Gas
Thermally driven oxygen production using oxygen storage materials (OSM) represents a promising alternative to conventional electrically driven air separation technologies, particularly for applications with available industrial waste heat. In this study, oxygen production using 380 g of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) mini-honeycombs per packed-bed in a cyclic process with steam as sweep gas was experimentally investigated. The developed experimental setup enabled alternating oxygen adsorption and desorption cycles at furnace temperatures between 600 and 900 °C using preheated air and steam. The influence of the furnace temperature, steam mass flow rate, air flow rate and cycle duration on the oxygen production behavior was evaluated. Increasing the furnace temperature resulted in higher oxygen yields, with a maximum yield of approximately 0.85 L at standard temperature and pressure per 6-minute cycle at 900 °C and oxygen purities between 91 and 95 vol%. Across all investigated temperatures, approximately 90 % of the total oxygen yield was released within the first 3.5 minutes of each cycle. Consequently, reducing the cycle duration from 6 minutes to 3.5 minutes resulted in only a minor decrease in oxygen yield while increasing the hourly oxygen production by approximately 50 %.,The desorption behavior was analyzed using the pseudo-second-order kinetic model, which described the experimental data with a median coefficient of determination of 0.9897. Durability investigations over 302 h showed that the BSCF 5582 mini-honeycombs remained structurally intact under high-temperature steam exposure. Overall, the results demonstrate the high potential of BSCF 5582 mini-honeycombs for decentralized oxygen production using industrial waste heat.
- 26 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOxygen Production in a Packed-Bed System Using Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) Mini-Honeycomb Oxygen Storage Materials and Steam as Sweep Gas
Thermally driven oxygen production using oxygen storage materials (OSM) represents a promising alternative to conventional electrically driven air separation technologies, particularly for applications with available industrial waste heat. In this study, oxygen production using 380 g of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF 5582) mini-honeycombs per packed-bed in a cyclic process with steam as sweep gas was experimentally investigated. The developed experimental setup enabled alternating oxygen adsorption and desorption cycles at furnace temperatures between 600 and 900 °C using preheated air and steam. The influence of the furnace temperature, steam mass flow rate, air flow rate and cycle duration on the oxygen production behavior was evaluated. Increasing the furnace temperature resulted in higher oxygen yields, with a maximum yield of approximately 0.85 L at standard temperature and pressure per 6-minute cycle at 900 °C and oxygen purities between 91 and 95 vol%. Across all investigated temperatures, approximately 90 % of the total oxygen yield was released within the first 3.5 minutes of each cycle. Consequently, reducing the cycle duration from 6 minutes to 3.5 minutes resulted in only a minor decrease in oxygen yield while increasing the hourly oxygen production by approximately 50 %.,The desorption behavior was analyzed using the pseudo-second-order kinetic model, which described the experimental data with a median coefficient of determination of 0.9897. Durability investigations over 302 h showed that the BSCF 5582 mini-honeycombs remained structurally intact under high-temperature steam exposure. Overall, the results demonstrate the high potential of BSCF 5582 mini-honeycombs for decentralized oxygen production using industrial waste heat.
- Open Access
- 24 August 2025
- Published by Elsevier in Carbon Trends
- Vol. 21
Technological characterisation of an innovative, shaped carbon from bagasse by comparison to two commercially available carbons
- 24 August 2025
- Published by Elsevier in Carbon Trends
- Vol. 21
Open AccessTechnological characterisation of an innovative, shaped carbon from bagasse by comparison to two commercially available carbons