ZSZilong Sun

Zilong Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zilong Sun has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated collisional-radiative and nonlinear global models for capacitively coupled argon plasma discharges

    by Qianghua Yuan, Zilong Sun, Lulu Ma, Zhanhui Gao, Guiqin Yin, Liang Zhang

    The discharge characteristics of low-pressure dual-frequency (13.56/40.68 MHz) capacitively coupled argon plasma were investigated using a comprehensive modeling framework that integrates an 18-level collisional-radiative model (CRM) with a nonlinear global model (NGM). Electron temperature (T e ) and electron density (n e ) at 60 mTorr were retrieved from calibrated Ar I emission lines at 750.4 and 696.5 nm using the CRM. These CRM-derived electron temperature and electron density were subsequently incorporated into the nonlinear global model as input parameters to simulate plasma current, high frequency (HF)/ low frequency (LF) electron currents, sheath thickness, and sheath capacitance. The results reveal that both excitation and ionization are enhanced with the HF power increase, which are supported by the increasing electron density and CRM-calculated reaction rates. The harmonic components of plasma current decrease slightly when the HF power change from 10-40 W and 60-80 W, and they are same at 10 W and at 50 W. These characteristics can be explained by the sheath thickness dominated nonlinear with the HF power increase. When the HF power increases from 10-50W, the sheath thicknesses are big, which indicate that the voltage of sheath is big, so the stochastic heating is dominated. When the HF power increases from 60-80W, the sheath thicknesses are small, because the rapidly rising electron density significantly strengthens bulk plasma conductivity, causing voltage to drop in the sheaths. As a result, sheath harmonic amplitudes decrease, and both HF and LF electron-current waveforms evolve toward nearly sinusoidal shapes, which indicate that the discharge is relatively uniform and stable. By linking the microscopic collisional-excitation-ionization kinetics obtained from the CRM with the macroscopic nonlinear global model, this study offer guidance for discharge-uniform improvement, and matching-network optimization in industrial plasma applications in dualfrequency CCPs..

  • Study on the Discharge Characteristics of Low-Pressure Magnetized Capacitively Coupled Ar/CH 4 Plasma

    by Guiqin Yin, Sheng Tuo, Qianghua Yuan, Zilong Sun, Zhanhui Gao, Lulu Ma

    The effect of an inhomogeneous transverse magnetic field on the discharge characteristics of a dual-frequency (13.56/27.12 MHz) capacitively coupled plasma (DF-CCP) is investigated using a 1-D particle-in-cell/Monte Carlo collision (PIC/MCC) simulation. The discharge gas pressure is 5 mTorr. Both the low-frequency (LF) power and high-frequency power are 60W, and the electrode spacing is 3.2 cm. The magnetic field changes from 30 to 80 G. The results indicate that the electron density exhibits pronounced asymmetry when the magnetic field is above 50 G. With increasing magnetic field, both the electron current density and electron heating rate rise, while the electron temperature increases and reaches a maximum when the magnetic field is 70 G. The mean free path indicates that kinetic disparities between low- and high-energy electrons are big at higher magnetic field, which drive discharge asymmetry. At 80 G, this kinetic disparity is reduced, and all electron populations are localized, so the symmetry is recovered. The electron energy probability distribution function (EEPF) changes from a bi-Maxwellian-like distribution to a single Maxwellian-like distribution with increasing magnetic field. The incidence angles of CH ${}_{4}^{+}$ and CH ${}_{3}^{+}$ ions on the electrodes also change markedly with the change of the magnetic field. The electron and ion fluxes of CH ${}_{4}^{+}$ and CH ${}_{3}^{+}$ demonstrate that the magnetic field-induced asymmetry results in higher fluxes on one side and lower fluxes on the opposite side at higher magnetic field (60–80G). The magnetic field has a significant influence on the discharge characteristics of Ar/CH4 CCPs, which can be utilized for tuning the kinetic behavior of plasma species.

  • Open Access

    The influence of matching network on the discharge uniformity of dual-frequency capacitively coupled Ar plasma

    by Qianghua Yuan, Liwen Shan, Zilong Sun, Sheng Tuo, Guiqin Yin

    An improved L–π type matching network is proposed to optimize the discharge uniformity of dual-frequency capacitively coupled plasma. A combination of the experimental and numerical simulation methods was employed to analyze the discharge characteristics of dual-frequency capacitively (8/100 MHz) coupled argon plasma. Both the low- and high-frequency powers were fixed at 60 W. The electron density, electron temperature, and voltage waveforms were obtained by an experiment, and these parameters were used as input parameters for the L–π-resistor, capacitor, and inductor (RCL) non-linear global model. By varying the capacitance CD1 in the RCL model (CD1 = 1, 3, 5, 7, and 9 pF), the plasma discharge was simulated. The results indicate that as CD1 increases, the oscillation amplitudes of the sheath thickness and sheath capacitance become stable in the latter half of the discharge cycle, and the oscillation waveforms become more regular. The plasma resistance and inductance decrease, while the power transmission efficiency is significantly improved. The introduction of the RCL element significantly reduces the amplitudes and the number of higher-order harmonics in the plasma discharge current, with only the 1st, 12th, and 13th harmonics dominating. Therefore, selecting medium-to-high capacitance values (5, 7, and 9 pF) in the RCL network significantly enhances the stability of the plasma discharge. The optimized matching network effectively improves the uniformity of the plasma discharge for industrial applications.