Pin Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pin Li has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Shanran Wang
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
2 shared publications - Hongjun Zhu
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, China
1 shared publication - Jia Yin
Hubei Provincial Institute for Food Supervision and Test, Wuhan 430075, China
1 shared publication Junjie Liu
1 shared publication- Junwei Ding1 shared publication
- Long Wu
School of Food Science and Engineering, Hainan University, Haikou 570228, China
1 shared publication
Latest Publications
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Effects of wall morphology and hydrogen leakage on hydrodynamic coefficients and wake evolution of flow over a near-wall cylinder
This paper uses open field operation and manipulation to conduct 2D numerical simulations for near-plane-wall and near-wavy-wall bare cylinders at Reynolds number 100 and gap ratios (G/D) 2–5, under leakage and non-leakage conditions, examining how G/D, the wavy wall, and leakage affect vortex evolution and hydrodynamics. The results show that under non-leakage conditions, the quasi-static vortex (QSd) behind the downstream wavy wall shows three types (type 1–3) with varying G/D. Their key difference is the migration pattern of the split vortex (QSd-S). Under the leakage condition, affected by hydrogen bubbles, only type 1 and type 2 QSd-S migration patterns exist. The wavy wall's hydrodynamic influence varies with G/D. Under the non-leakage condition, the critical G/D is 2.5, while under the leakage condition, extending to 3. Compared with the near-plane-wall cylinder, under the effect of the wavy wall, the force coefficients of the cylinder show a decrease in both lift and drag features; when above the critical value, they present an increase in both lift and drag features. Under the leakage condition, three hydrogen migration modes are found, which affect the migration of the lower-side main vortex and the force coefficients, with the competition ranking I > II1 > II2. Under the non-leakage condition, lift and drag frequencies of the near-wall cylinder show dual-frequency vibration and same-frequency coupling. After leakage, multi-frequency fluctuations occur, and the dominant frequency shifts over time. Under the influence of hydrogen bubbles, a drag frequency that is triple the lift dominant frequency emerges.
- 1 July 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (7)
Effects of wall morphology and hydrogen leakage on hydrodynamic coefficients and wake evolution of flow over a near-wall cylinder
This paper uses open field operation and manipulation to conduct 2D numerical simulations for near-plane-wall and near-wavy-wall bare cylinders at Reynolds number 100 and gap ratios (G/D) 2–5, under leakage and non-leakage conditions, examining how G/D, the wavy wall, and leakage affect vortex evolution and hydrodynamics. The results show that under non-leakage conditions, the quasi-static vortex (QSd) behind the downstream wavy wall shows three types (type 1–3) with varying G/D. Their key difference is the migration pattern of the split vortex (QSd-S). Under the leakage condition, affected by hydrogen bubbles, only type 1 and type 2 QSd-S migration patterns exist. The wavy wall's hydrodynamic influence varies with G/D. Under the non-leakage condition, the critical G/D is 2.5, while under the leakage condition, extending to 3. Compared with the near-plane-wall cylinder, under the effect of the wavy wall, the force coefficients of the cylinder show a decrease in both lift and drag features; when above the critical value, they present an increase in both lift and drag features. Under the leakage condition, three hydrogen migration modes are found, which affect the migration of the lower-side main vortex and the force coefficients, with the competition ranking I > II1 > II2. Under the non-leakage condition, lift and drag frequencies of the near-wall cylinder show dual-frequency vibration and same-frequency coupling. After leakage, multi-frequency fluctuations occur, and the dominant frequency shifts over time. Under the influence of hydrogen bubbles, a drag frequency that is triple the lift dominant frequency emerges.
- Open Access
- 4 March 2026
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 80
Optimization of a latent heat thermal energy storage device for waste heat recovery in data center campus
- 4 March 2026
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 80
Open AccessOptimization of a latent heat thermal energy storage device for waste heat recovery in data center campus
- Open Access
- 26 November 2025
- Published by MDPI AG in Biosensors
- Vol. 15 (12) , 778
Research Progress of Biosensors in the Detection of Pesticide Residues and Heavy Metals in Tea Leaves
Tea, a worldwide prevalent beverage, is continually contaminated by pesticide residues and heavy metals, presenting considerable health concerns to consumers. Nonetheless, effective monitoring is limited by conventional detection techniques—such as gas chromatography (GC) and inductively coupled plasma mass spectrometry (ICP-MS)—which, despite their high precision, necessitate intricate pretreatment, incur substantial operational expenses, and are inadequate for swift on-site analysis. Biosensors have emerged as a viable option, addressing this gap with their exceptional sensitivity, rapid response, and ease of operation.This review rigorously evaluates recent advancements in biosensing technologies for the detection of pesticide residues and heavy metals in tea, emphasizing the mechanisms, analytical performance, and practical applicability of prominent platforms such as fluorescence, surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), colorimetric, and electrochemical biosensors. Electrochemical and fluorescent biosensors provide the highest promise for portable, on-site use owing to their enhanced sensitivity, cost-effectiveness, and flexibility to intricate tea matrices. The paper further emphasizes upcoming techniques such multi-component detection, microfluidic integration, and AI-enhanced data processing. Biosensors provide significant potential to revolutionize tea safety monitoring, with future advancements dependent on the synergistic incorporation of sophisticated nanomaterials, intelligent microdevices, and real-time analytics across the whole “tea garden-to-cup” supply chain.
- 26 November 2025
- Published by MDPI AG in Biosensors
- Vol. 15 (12) , 778
Open AccessResearch Progress of Biosensors in the Detection of Pesticide Residues and Heavy Metals in Tea Leaves
Tea, a worldwide prevalent beverage, is continually contaminated by pesticide residues and heavy metals, presenting considerable health concerns to consumers. Nonetheless, effective monitoring is limited by conventional detection techniques—such as gas chromatography (GC) and inductively coupled plasma mass spectrometry (ICP-MS)—which, despite their high precision, necessitate intricate pretreatment, incur substantial operational expenses, and are inadequate for swift on-site analysis. Biosensors have emerged as a viable option, addressing this gap with their exceptional sensitivity, rapid response, and ease of operation.This review rigorously evaluates recent advancements in biosensing technologies for the detection of pesticide residues and heavy metals in tea, emphasizing the mechanisms, analytical performance, and practical applicability of prominent platforms such as fluorescence, surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), colorimetric, and electrochemical biosensors. Electrochemical and fluorescent biosensors provide the highest promise for portable, on-site use owing to their enhanced sensitivity, cost-effectiveness, and flexibility to intricate tea matrices. The paper further emphasizes upcoming techniques such multi-component detection, microfluidic integration, and AI-enhanced data processing. Biosensors provide significant potential to revolutionize tea safety monitoring, with future advancements dependent on the synergistic incorporation of sophisticated nanomaterials, intelligent microdevices, and real-time analytics across the whole “tea garden-to-cup” supply chain.
- Open Access
CFD Simulation of Aerosol and Odor Gas Transport Dynamics in Shipboard Underwater Lavatories
The underwater lavatories aboard ships are compact and suffer from inadequate ventilation, thereby increasing the likelihood of infection and odor issues. The crew will endure discomfort from the poor air quality within the lavatories, especially following prolonged travel. This study establishes a three-dimensional numerical model of an underwater lavatory unit, employing computational fluid dynamics (CFD) to assess ventilation performance and contaminant distributions. The concentration of odor gas and the fate of particles within the lavatory were evaluated for a duration of 3 min subsequent to flushing, considering two scenarios: occupants using either the toilet or the urinal. Additionally, the exhaust air volume and the layouts of the lavatory vents were optimized. The results indicate that the individual using the toilet has a lower concentration of ammonia inhalation, and both scenarios remain unaffected by odors within 60 s after flushing. In contrast to the scenario of using the toilet, the case of using the urinal poses notably fewer risks of human contact, with 65.7% of the deposited particles residing on the urinal surfaces and a mere 8.9% adhering to the manikin surfaces. Enhancing the exhaust air volume can facilitate odor removal in the urinal scenario while slightly improving odor control in the case of using the toilet. An airflow rate of 250 m3/h resulted in a 40% increase in particle deposition within the urinal and a roughly 70% decrease on the manikin during the toileting scenario. The existing ship lavatory ventilation is insufficient to manage the risk of aerosol exposure and sense of smell in the breathing zone of standing crew. The air quality within a lavatory can be significantly improved by employing upper air-supply and lower air-exhaust ventilation.
Open AccessCFD Simulation of Aerosol and Odor Gas Transport Dynamics in Shipboard Underwater Lavatories
The underwater lavatories aboard ships are compact and suffer from inadequate ventilation, thereby increasing the likelihood of infection and odor issues. The crew will endure discomfort from the poor air quality within the lavatories, especially following prolonged travel. This study establishes a three-dimensional numerical model of an underwater lavatory unit, employing computational fluid dynamics (CFD) to assess ventilation performance and contaminant distributions. The concentration of odor gas and the fate of particles within the lavatory were evaluated for a duration of 3 min subsequent to flushing, considering two scenarios: occupants using either the toilet or the urinal. Additionally, the exhaust air volume and the layouts of the lavatory vents were optimized. The results indicate that the individual using the toilet has a lower concentration of ammonia inhalation, and both scenarios remain unaffected by odors within 60 s after flushing. In contrast to the scenario of using the toilet, the case of using the urinal poses notably fewer risks of human contact, with 65.7% of the deposited particles residing on the urinal surfaces and a mere 8.9% adhering to the manikin surfaces. Enhancing the exhaust air volume can facilitate odor removal in the urinal scenario while slightly improving odor control in the case of using the toilet. An airflow rate of 250 m3/h resulted in a 40% increase in particle deposition within the urinal and a roughly 70% decrease on the manikin during the toileting scenario. The existing ship lavatory ventilation is insufficient to manage the risk of aerosol exposure and sense of smell in the breathing zone of standing crew. The air quality within a lavatory can be significantly improved by employing upper air-supply and lower air-exhaust ventilation.