Miao Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Miao Du has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Chuanpan Guo
College of Material and Chemical Engineering Institute of New Energy Science and Technology School of Future Hydrogen Energy Technology Zhengzhou University of Light Industry Zhengzhou P. R. China
2 shared publicationsJiameng Liu
School of Medical Engineering Xinxiang Medical University Xinxiang P. R. China
2 shared publicationsShuai Zhang
College of Material and Chemical Engineering Institute of New Energy Science and Technology School of Future Hydrogen Energy Technology Zhengzhou University of Light Industry Zhengzhou P. R. China
2 shared publicationsZhihong Zhang
College of Material and Chemical Engineering Institute of New Energy Science and Technology School of Future Hydrogen Energy Technology Zhengzhou University of Light Industry Zhengzhou P. R. China
2 shared publicationsA Yulong
College of Material and Chemical Engineering Institute of New Energy Science and Technology School of Future Hydrogen Energy Technology Zhengzhou University of Light Industry Zhengzhou P. R. China
1 shared publicationDongyang Shi
College of Material and Chemical Engineering Institute of New Energy Science and Technology School of Future Hydrogen Energy Technology Zhengzhou University of Light Industry Zhengzhou P. R. China
1 shared publication
Latest Publications
- Open Access
- 7 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (45) , e75302
2D Conductive Cu‐MOF as a Multifunctional Regulator of Both Cathode and Anode to Synergistically Enhance the Performance of High‐Loading Aqueous Zinc‐Iodine Batteries
Aqueous zinc‐iodine batteries (AZIBs) have gained widespread attention in large‐scale energy storage and other fields owing to their high safety, low cost, and environmental friendliness. However, AZIBs still face challenges such as iodine shuttling effect and zinc dendrite growth. Herein, a 2D conductive copper metal–organic framework (Cu‐MOF) with the unique Cu─O 4 coordination motif is used as a multifunctional regulator of both cathode and anode to synergistically enhance the comprehensive performances of high‐loading AZIBs. For the iodine cathode regulator, the full cell of AZIBs with 2D Cu‐MOF exhibits the improved capacity and rate performance. For the zinc anode regulator, the Zn//Zn symmetric cell and Zn//Cu half‐cell with 2D Cu‐MOF show the enhanced cycle stability and excellent coulombic efficiency, respectively. With the 2D Cu‐MOF as a multifunctional regulator for both cathode and anode, the resulting high‐loading AZIBs exhibit superior electrochemical performances and the assembled 3 × 3 cm 2 pouch cell also demonstrates long‐term cycling stability. The experimental and theoretical analyses reveal that the Cu─O 4 coordination center in 2D Cu‐MOF can provide strong anchoring effect toward iodine species and facilitate the uniform zinc deposition/stripping. This work provides a new approach to improve the comprehensive performance of AZIBs by utilizing 2D MOFs as multifunctional regulators.
- 7 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (45) , e75302
Open Access2D Conductive Cu‐MOF as a Multifunctional Regulator of Both Cathode and Anode to Synergistically Enhance the Performance of High‐Loading Aqueous Zinc‐Iodine Batteries
Aqueous zinc‐iodine batteries (AZIBs) have gained widespread attention in large‐scale energy storage and other fields owing to their high safety, low cost, and environmental friendliness. However, AZIBs still face challenges such as iodine shuttling effect and zinc dendrite growth. Herein, a 2D conductive copper metal–organic framework (Cu‐MOF) with the unique Cu─O 4 coordination motif is used as a multifunctional regulator of both cathode and anode to synergistically enhance the comprehensive performances of high‐loading AZIBs. For the iodine cathode regulator, the full cell of AZIBs with 2D Cu‐MOF exhibits the improved capacity and rate performance. For the zinc anode regulator, the Zn//Zn symmetric cell and Zn//Cu half‐cell with 2D Cu‐MOF show the enhanced cycle stability and excellent coulombic efficiency, respectively. With the 2D Cu‐MOF as a multifunctional regulator for both cathode and anode, the resulting high‐loading AZIBs exhibit superior electrochemical performances and the assembled 3 × 3 cm 2 pouch cell also demonstrates long‐term cycling stability. The experimental and theoretical analyses reveal that the Cu─O 4 coordination center in 2D Cu‐MOF can provide strong anchoring effect toward iodine species and facilitate the uniform zinc deposition/stripping. This work provides a new approach to improve the comprehensive performance of AZIBs by utilizing 2D MOFs as multifunctional regulators.
- 7 February 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (37)
Boosting * NOH Intermediate Generation Kinetics for Nitrate Synthesis: Insights From Photo‐Assisted Electrocatalytic Nitrogen Oxidation
The electrocatalytic nitrogen oxidation reaction (eNOR) offers a sustainable route for nitrate (NO 3 ‒ ) synthesis, yet its practical application is limited by sluggish intermediate formation kinetics. Although •OH generated during water oxidation can promote the formation of the key * NOH intermediate, the cooperative mechanism between •OH and catalytic sites remains insufficiently understood. Herein, a spin‐state modulation strategy is proposed to enhance * NOH generation under simulated solar irradiation, thereby markedly improving the NO 3 ‒ yield and Faradaic efficiency (FE) of the eNOR. A heterojunction catalyst consisting of CoMo‐based layered double hydroxide nanosheets grown in situ on Ti 3 C 2 T x MXene (CoMo‐LDH@Ti 3 C 2 T x ) was developed to enable light‐assisted eNOR. The incorporation of Mo into Co‐LDH, together with the built‐in electric field of the heterojunction, enhances Mo–Co orbital hybridization and induces a spin‐state transition of Co 3+ centers from t 2g 6 e g 0 to t 2g 4 e g 2 configuration. This electronic regulation strengthens N 2 activation and accelerates * NOH formation via the cooperative involvement of two •OH radicals under illumination, thereby significantly boosting eNOR kinetics. Consequently, CoMo‐LDH@Ti 3 C 2 T x delivers NO 3 ‒ yield of 198.55 µg h −1 mg cat. −1 and FE of 46.22% under solar light, outperforming dark conditions and state‐of‐the‐art catalysts. These findings underscore the critical roles of spin‐state engineering and radical synergy in advancing sustainable nitrate production.
- 7 February 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (37)
Boosting * NOH Intermediate Generation Kinetics for Nitrate Synthesis: Insights From Photo‐Assisted Electrocatalytic Nitrogen Oxidation
The electrocatalytic nitrogen oxidation reaction (eNOR) offers a sustainable route for nitrate (NO 3 ‒ ) synthesis, yet its practical application is limited by sluggish intermediate formation kinetics. Although •OH generated during water oxidation can promote the formation of the key * NOH intermediate, the cooperative mechanism between •OH and catalytic sites remains insufficiently understood. Herein, a spin‐state modulation strategy is proposed to enhance * NOH generation under simulated solar irradiation, thereby markedly improving the NO 3 ‒ yield and Faradaic efficiency (FE) of the eNOR. A heterojunction catalyst consisting of CoMo‐based layered double hydroxide nanosheets grown in situ on Ti 3 C 2 T x MXene (CoMo‐LDH@Ti 3 C 2 T x ) was developed to enable light‐assisted eNOR. The incorporation of Mo into Co‐LDH, together with the built‐in electric field of the heterojunction, enhances Mo–Co orbital hybridization and induces a spin‐state transition of Co 3+ centers from t 2g 6 e g 0 to t 2g 4 e g 2 configuration. This electronic regulation strengthens N 2 activation and accelerates * NOH formation via the cooperative involvement of two •OH radicals under illumination, thereby significantly boosting eNOR kinetics. Consequently, CoMo‐LDH@Ti 3 C 2 T x delivers NO 3 ‒ yield of 198.55 µg h −1 mg cat. −1 and FE of 46.22% under solar light, outperforming dark conditions and state‐of‐the‐art catalysts. These findings underscore the critical roles of spin‐state engineering and radical synergy in advancing sustainable nitrate production.
- 19 August 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (8)
Interfacial Electronic Engineering of the 2D/2D Cu‐MoS 2 /Cu 3 (HIB) 2 Heterojunction for Bifunctional Ammonia Electrolysis: Synergistic Hydrogen Production and Wastewater Detoxification
The electrocatalytic ammonia oxidation reaction (eAOR) holds great potential for sustainable hydrogen production but is limited by sluggish kinetics. In this study, a novel 2D/2D heterojunction, Cu‐MoS 2 /Cu 3 (HIB) 2 (HIB: 1,2,3,4,5,6‐hexachlorobenzene), is fabricated via in situ growth of a conductive copper‐based metal–organic framework (Cu 3 (HIB) 2 ) around Cu‐doped MoS 2 . This heterojunction integrates abundant sulfur vacancies, modulates electron density at active sites, and facilitates rapid electron transfer. As a result, it exhibits significantly enhanced eAOR and hydrogen evolution reaction (HER) performance compared to individual components. The assembled electrolyzer achieves ≈100% ammonia removal and a high hydrogen production rate of 15.3 mL h −1 at 1.60 V versus RHE. In situ Fourier transform infrared (FT‐IR) spectroscopy and density functional theory analyses reveal that S vacancies and Cu doping induce electron localization and orbital hybridization (Cu 3 d , Mo 4 d , S 2 p ), stabilizing Mo active sites and promoting ammonia (NH 3 ) adsorption and activation. The formation and transformation of intermediates are optimized, facilitating the selective conversion of NH 3 to nitrogen (N 2 ). This study provides valuable insights into the design of bifunctional electrocatalysts via dimensional heterojunctions and demonstrates a promising strategy for coupling wastewater treatment with hydrogen production.
- 19 August 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (8)
Interfacial Electronic Engineering of the 2D/2D Cu‐MoS 2 /Cu 3 (HIB) 2 Heterojunction for Bifunctional Ammonia Electrolysis: Synergistic Hydrogen Production and Wastewater Detoxification
The electrocatalytic ammonia oxidation reaction (eAOR) holds great potential for sustainable hydrogen production but is limited by sluggish kinetics. In this study, a novel 2D/2D heterojunction, Cu‐MoS 2 /Cu 3 (HIB) 2 (HIB: 1,2,3,4,5,6‐hexachlorobenzene), is fabricated via in situ growth of a conductive copper‐based metal–organic framework (Cu 3 (HIB) 2 ) around Cu‐doped MoS 2 . This heterojunction integrates abundant sulfur vacancies, modulates electron density at active sites, and facilitates rapid electron transfer. As a result, it exhibits significantly enhanced eAOR and hydrogen evolution reaction (HER) performance compared to individual components. The assembled electrolyzer achieves ≈100% ammonia removal and a high hydrogen production rate of 15.3 mL h −1 at 1.60 V versus RHE. In situ Fourier transform infrared (FT‐IR) spectroscopy and density functional theory analyses reveal that S vacancies and Cu doping induce electron localization and orbital hybridization (Cu 3 d , Mo 4 d , S 2 p ), stabilizing Mo active sites and promoting ammonia (NH 3 ) adsorption and activation. The formation and transformation of intermediates are optimized, facilitating the selective conversion of NH 3 to nitrogen (N 2 ). This study provides valuable insights into the design of bifunctional electrocatalysts via dimensional heterojunctions and demonstrates a promising strategy for coupling wastewater treatment with hydrogen production.