DUDilshad Umar

Dilshad Umar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dilshad Umar has a total of 44 co-authors. Here are the top co-authors by number of shared publications:

  • Sandeep Shetty

    Dept. of Orthodontics and Dentofacial Orthopaedics, Yenepoya Dental College, Yenepoya (Deemed to be University), Mangalore, Karnataka, India

    14 shared publications
  • Shafees Koya

    Centre For Craniofacial Anomalies, Yenepoya (Deemed to be University), Mangalore, Karnataka, India

    7 shared publications
  • Akhter Husain

    Department of Orthodontics and Dentofacial Orthopaedics, Yenepoya Dental College, Yenepoya (Deemed to be University), Mangalore, Karnataka, India

    6 shared publications
  • Subramanya Shetty

    Department of Orthodontics and Dentofacial Orthopaedics, Yenepoya Dental College, Yenepoya University, Mangaluru, Karnataka, India

    6 shared publications
  • Vivek Amin

    Department of Orthodontics and Dentofacial Orthopaedics, Yenepoya Dental College, Yenepoya (Deemed to be University), Mangalore, Karnataka, India

    6 shared publications
  • Rohan Mascarenhas

    Department of Orthodontics and Dentofacial Orthopaedics, Yenepoya Dental College, Yenepoya (Deemed to be University), Mangalore, Karnataka, India

    3 shared publications

Latest Publications

  • Open Access

    Biomechanical evaluation of PEEK, titanium, and stainless steel IZC screws in maxillary arch distalization: A finite element analysis approach

    by Sandeep Shetty, Aqil Mk, Dilshad Umar, Haneesh Kiran, Ameera Kunhabdulla

    Background : Maxillary arch distalization is a key strategy in the non-extraction management of Class II malocclusions. Infrazygomatic crest (IZC) screws serve as reliable extra-alveolar anchorage units in such treatments. The choice of screw material significantly influences biomechanical performance, yet comparative data on commonly used materials polyether ether ketone (PEEK), stainless steel, and titanium remain limited. Aims and Objectives : To evaluate the influence of hypothetical material substitution on stress distribution and deformation patterns during maxillary arch distalization by assigning PEEK, titanium, and stainless-steel material properties to an IZC screw of standardized geometry using finite element analysis. Materials and Methods : Three-dimensional finite element models of the maxillary arch were constructed from CT scan data. CAD software (CATIA V5 R19) and ANSYS Workbench R17.2 were used to simulate en-masse distalization. Identical boundary and loading conditions, including a bilateral 200-g retraction force, were applied to all models. A standardized IZC screw geometry was maintained across the models as a controlled hypothetical material-substitution approach, with material-specific mechanical properties assigned for PEEK, titanium, and stainless steel. Von Mises stress in the periodontal ligament (PDL), dentition, IZC screw, and surrounding bone, together with total deformation of the dentition and screw, was evaluated and compared. Results : PEEK exhibited the highest PDL stress (0.026515 MPa) and the greatest maximum total screw deformation (25.192 µm). Stainless steel demonstrated the highest internal screw stress (16.854 MPa) and the lowest maximum total screw deformation (1.2119 µm). Titanium showed intermediate maximum screw deformation (1.8056 µm) and the highest surrounding-bone stress (3.1641 MPa). Stress within the maxillary dentition was nearly identical across the three material models. Conclusion : Under the standardized conditions of this hypothetical material-substitution model, screw material influenced the predicted stress and deformation patterns. Stainless steel exhibited the lowest screw deformation, PEEK demonstrated the greatest deformation, and titanium produced the highest surrounding-bone stress. These findings are specific to the standardized screw geometry and should not be interpreted as direct evidence of comparative clinical anchorage performance.

  • Open Access

    Assessment of Soft Tissue Profile Changes Resulting from Maxillary and Mandibular Incisor Movements in Class I Malocclusion Patients

    by Dilshad Umar, Midhul Subhi, B M Salwa, Sandeep Shetty, Vivek Amin, Akhter Husain

    Aim: The aim of this study was to evaluate soft tissue profile changes resulting from different incisor movements. Methodology: The study involved 40 patients with Class I malocclusion (bimaxillary protrusion/crowding) treated using fixed orthodontic appliances. Pre- and posttreatment lateral cephalograms were analyzed with MAKHTER Facial Analysis Software to assess the correlation between incisor movements and soft tissue profile changes. Results: Maxillary incisor retraction resulted in significant changes in soft tissue landmarks, including labrale superius, sulcus superius, labrale inferius (LI), and stomion superius. In contrast, mandibular incisor retraction showed significant changes predominantly in lower lip landmarks, namely LI and sulcus inferius. Upper lip changes were minimal with mandibular incisor movement. Conclusion: Soft tissue profile alterations are primarily influenced by the horizontal movement of maxillary and mandibular incisors. Maxillary incisor retraction demonstrates a stronger impact on upper lip landmarks, while mandibular incisor retraction significantly affects the lower lip region.

  • Open Access

    Stress Distribution in Teeth and the Periodontal Ligament During Leveling of the Curve of Spee: A Finite Element Study

    by Dilshad Umar, Rohan Mascarenhas, Shreyaskar Rakshit, Salwa Bm

    Background: An exaggerated curve of Spee is a common finding in malocclusions with a deep overbite and requires correction to achieve functional occlusion and long-term stability. Leveling of the curve of Spee using continuous archwire mechanics generates complex force systems, the biomechanical effects of which depend on archwire material properties, cross-sectional dimensions, and the depth of the curvature being corrected. Quantitative data describing stress distribution within the teeth and periodontal ligament during this process remain limited. Objective: To evaluate and compare the stresses generated in the mandibular teeth and periodontal ligament during leveling of the curve of Spee using orthodontic archwires of different materials and dimensions through three-dimensional finite element analysis. Materials and Methods: A three-dimensional finite element model of the mandibular dentition, periodontal ligament, and supporting alveolar bone was constructed from computed tomography data. Orthodontic brackets and archwires of stainless steel, nickel–titanium, and titanium–molybdenum alloy were modeled in four dimensions: 0.014-inch, 0.016-inch, 0.016 × 0.022-inch, and 0.019 × 0.025-inch. Leveling of the curve of Spee was simulated at incremental depths ranging from 2 mm to 6 mm using displacement-controlled activation. Von Mises stresses generated within the teeth and periodontal ligament were recorded and compared across all simulations. Results: Stress magnitudes increased with increasing depth of the curve of Spee, larger archwire dimensions, and greater wire stiffness. Stainless steel archwires produced the highest stresses, followed by titanium–molybdenum alloy, while nickel–titanium archwires consistently generated the lowest stresses in both teeth and periodontal ligament. Conclusions: Archwire material and dimension significantly influence stress generation during leveling of the curve of Spee. Flexible archwires produce lower stress levels and may be advantageous during early correction of deeper curves.

  • Evaluation of a Novel Zygomatic-based Cephalometric Angle for Sagittal Skeletal Discrepancy: A Retrospective Study

    by Subramanya Shetty, Dilshad Umar, Kelly Ctm Egipsy, Mohammed Khais

    To evaluate the diagnostic accuracy of a novel zygomatic-based cephalometric parameter, the ZYen angle, for assessing sagittal skeletal discrepancies. This retrospective cross-sectional study analyzed 369 pretreatment lateral cephalograms of subjects aged 18-25 years, equally distributed into skeletal class I (n = 123), class II (n = 123), and class III (n = 123) groups. Skeletal classification was performed using the A point-nasion-B point angle (ANB) and Wits appraisal. The ZYen angle, defined using points M, Z (zygomatic point), and D, was measured, and its diagnostic performance was assessed using one-way analysis of variance (ANOVA) and receiver operating characteristic (ROC) curve analysis to determine sensitivity, specificity, and area under the curve (AUC). The ZYen angle showed significant differences among skeletal classes (p < 0.001). Receiver operating characteristic analysis demonstrated excellent discrimination between skeletal class I and class III (AUC = 0.908), with a cut-off value of 29.5° providing balanced sensitivity (78.9%) and specificity (82.9%). In contrast, discrimination between class I and class II was poor (AUC = 0.594), indicating limited diagnostic ability for identifying class II patterns. The ZYen angle is a reliable sagittal skeletal parameter with high diagnostic accuracy for distinguishing class I from class III relationships but limited utility in differentiating class II malocclusions. Accurate sagittal skeletal diagnosis is essential for orthodontic treatment planning and prognosis. The ZYen angle utilizes stable zygomatic landmarks and minimizes reliance on cranial base and dental reference points, enhancing diagnostic confidence in class III cases. It may serve as a clinically useful adjunct to conventional cephalometric parameters, particularly in borderline or ambiguous sagittal discrepancies.

  • Comprehensive Smile Component Analysis in Unilateral Cleft Lip and Palate Using Akhter–Anne Framework

    by Andrade Tanvi Sera Noel, Dilshad Umar, Shafees Koya, Akhter Husain

    Objective: This study aimed to comprehensively compare smile aesthetics between surgically corrected unilateral cleft lip and palate (CUCLP) patients and non-cleft controls, evaluating multiple facial domains to identify persistent deficits. Design: A cross-sectional, comparative study was conducted. Setting: The study was performed in a clinical research setting. Patients/Participants: The cohort consisted of 30 CUCLP patients who had undergone surgical repair and 30 age- and sex-matched non-cleft controls, all aged between 16 and 30 years. Interventions: The intervention for the patient group was prior surgical correction of CUCLP; no new intervention was administered as part of this observational study. Main Outcome Measure(s): Standardized frontal photographs were analyzed using MAKHTER software and the Akhter–Anne Smile Diagram. Key parameters measured across facial, nasal, labial, nasolabial, and dento-gingival domains included nasal width, commissure width, philtrum height, lip length, and incisor display. Results: The facial component showed no significant differences. However, CUCLP patients exhibited significant deficits in other domains: reduced philtrum height (0.58 ± 0.21 mm vs. 0.84 ± 0.31 mm; p = 0.004), shorter upper lip length (0.42 ± 0.14 mm vs. 0.62 ± 0.22 mm; p = 0.001), and narrower commissure width (4.23 ± 0.52 mm vs. 6.95 ± 0.90 mm; p < 0.001). Nasal width was reduced (3.25 ± 0.40 mm vs. 4.56 ± 0.54 mm; p < 0.001) with pronounced nasolabial asymmetry. Dento-gingivally, maxillary incisor show was less (1.80 ± 0.54 mm vs. 3.45 ± 0.63 mm; p < 0.01) while mandibular incisor display was greater (2.75 ± 0.48 mm vs. 1.25 ± 0.36 mm; p < 0.05). Conclusions: Despite surgical repair, CUCLP patients have persistent esthetic impairments, particularly in the nasolabial and dento-gingival regions. A structured, multi-domain smile analysis is crucial for guiding multidisciplinary treatment to optimize final aesthetic and psychosocial outcomes.

  • Impact of removing fixed orthodontic appliances on oral microbial dysbiosis: A longitudinal study and metagenomic sequencing analysis

    by Nisha Fathima, Rohan Mascarenhas, Dilshad Umar, Punchappady Devasya Rekha, Sandeep Shetty, Vivek Amin

    Objective: To investigate the impact of appliance removal on oral microbial diversity, composition, and abundance using metagenomic sequencing. It aims to identify the core microbiome and assess changes between mid-treatment and 2 weeks after debonding to understand the relationship between orthodontic therapy and oral health better. Methods: This longitudinal cohort study recruited 26 patients undergoing fixed orthodontic treatment between January 2022 and June 2023. Saliva samples were collected at two predefined time points: mid-treatment (T0, defined as before appliance removal) and 2 weeks after debonding (T1). Microbial DNA was extracted and the V1–V3 hypervariable regions of the 16S rRNA gene were sequenced using Illumina NovaSeq. Bioinformatics analysis was performed using QIIME and the SILVA database to evaluate microbial diversity and composition at T0 and T1. Beta diversity metrics and statistical tests, including PERMANOVA and Wilcoxon signed-rank tests, were applied to identify significant differences ( P < 0.05). Effect sizes with 95% confidence intervals (CIs) were reported. Results: The analysis revealed significant shifts in microbial diversity and composition between T0 and T1. A total of 189 species across 63 genera were identified, with Firmicutes, Bacteroidetes , Proteobacteria, Actinobacteria, and Fusobacteria as dominant phyla. Genera such as Fusobacterium periodonticum (↑ 12.4%, 95% CI = 10.1–14.7) and Veillonella parvula (↑ 9.8%, 95% CI = 7.6–11.3) increased after debonding, while Prevotella melaninogenica (↓ 10.2%, 95% CI = 8.1–12.0) and Rothia dentocariosa (↓ 7.9%, 95% CI = 6.3–9.2) decreased. Beta diversity analysis confirmed a statistically significant microbial community shift ( P < 0.05). Conclusion: This study demonstrated significant microbial shifts between mid-treatment and 2 weeks after debonding, including increases in potentially pathogenic genera and alterations in the core microbiome. These findings indicate microbial changes persist for at least 2 weeks after appliance removal. Further research with pre-treatment baselines and extended follow-up is required to better define the long-term trajectory of these changes.


  • Open Access

    Health and environmental hazards of shape memory polymer used in orthodontic aligners – a scoping review

    by Sweety Agrawal, Mithun K. Naik, Dilshad Umar, Sandeep Shetty

    Background: Shape memory polymers (SMPs) are gaining traction in orthodontics, particularly in clear aligners, due to their stimulus-responsive behavior and potential to improve treatment outcomes. However, their use in biomedical devices raises questions about biocompatibility and environmental sustainability. Objectives: This scoping review aims to map current evidence on the health and environmental risks of SMPs used in orthodontic aligners, identify knowledge gaps, and guide future research. Search methods: A systematic search of PubMed, Scopus, Web of Science, Embase, ProQuest, and Cochrane databases was conducted, focusing on studies from the past decade. Search terms included SMPs, orthodontic aligners, toxicity, biodegradability, and environmental impact. Selection criteria: Eligible studies involved original in vitro, in vivo, clinical, or environmental research related to SMPs in orthodontic applications. Data collection and analysis: Key information from each study was extracted using a standardized Excel spreadsheet by one reviewer (SA) and validated by another (MKN). Extracted data included study design, polymer type, health and environmental risks, and conclusions. Due to heterogeneity, results were synthesized narratively. Results: Sixteen studies met the inclusion criteria. Evidence on SMP biocompatibility is emerging but limited. Certain SMP formulations released residual monomers and degradation products with potential cytotoxic or systemic effects. Environmental concerns included low degradability, accumulation of polymer waste, and lack of recycling strategies. Notably, there was a lack of long-term clinical data and environmental life-cycle analyses. Conclusions: While SMPs offer promise in orthodontics, their safety and environmental impacts are insufficiently studied. Future research should focus on standardized toxicological testing, long-term evaluations, and sustainable material development. Registration and Conflicts: This scoping review was prospectively registered in PROSPERO (ID: CRD42022308725). The authors report no conflicts of interest.


  • Open Access

    Three-Dimensional Finite Element Analysis of Forces Produced by Different Orthodontic Archwires

    by Minaz Mubeen, Rohan Mascarenhas, Jemshid Ahamed Achoth, Dilshad Umar

    The biomechanical properties of orthodontic archwires influence the efficacy and biological response of tooth movement. Austenitic (A-NiTi) and Martensitic (M-NiTi) nickel-titanium wires are widely used in clinical practice, yet their mechanical behavior under varying displacements remains quantified. Finite element analysis (FEA) offers a tool to simulate and evaluate such differences under conditions. To compare the force delivery, stress-strain distribution in the periodontal ligament (PD

  • Open Access

    An Innovative Roll-on Bracket Design to Reduce Friction in Sliding Mechanics: A Finite Element Analysis

    by Surbhi Dharne, Dilshad Umar, Minaz Mubeen, Yasmeen Aziz, Akhter Husain

    Background: This study evaluated an innovative roll-on bracket, incorporating a ball-and-socket mechanism, for its biomechanical efficiency in reducing friction at the bracket–archwire interface during en masse retraction. The hypothesis was that selective placement would optimize sliding mechanics, yielding lower stress and deformation in dentoalveolar structures compared with conventional preadjusted edgewise brackets. Methodology: An in silico experimental study was performed using three-dimensional finite element analysis. Computed tomography scans of the maxillary dentition were used to construct anatomically accurate digital models. Roll-on and conventional MBT brackets were modeled and analyzed in ANSYS Workbench with validated material properties. Orthodontic forces of 1 N, 2 N, and 3 N were applied under three configurations: roll-on brackets on anterior teeth, roll-on brackets on canines and premolars, and conventional brackets on anterior teeth. Outcomes included stress at the bracket–archwire interface, periodontal ligament (PDL), alveolar bone, and dentition, as well as deformation patterns. Results: Roll-on brackets on anterior teeth produced higher anterior stress and deformation but reduced posterior load. Selective placement on canines and premolars significantly lowered anterior stress and deformation while optimizing overall stress distribution, though with increased posterior anchorage demands. Stress and deformation patterns were directly proportional to force magnitude. Conclusion: The roll-on bracket can modulate orthodontic biomechanics, with effectiveness influenced by placement within the arch. Strategic application may enhance force efficiency and reduce adverse tissue effects, though clinical validation is required.


  • Dental maturity vs. skeletal maturity: a cross-sectional comparison of mandibular canine development, CVMI, and salivary ALP activity in 8–15-year-old children

    by Kelly Celina Tessie Monteiro Egipsy, Subramanya Shetty, Dilshad Umar, Sandeep Shetty

    Radiographic assessments of pubertal growth (e.g., hand-wrist films, CVMI) are subjective and involve ionizing radiation. Total salivary alkaline phosphatase (ALP) offers a non-invasive alternative. To compare mandibular canine development with skeletal maturity indicators-CVMI and salivary ALP, cross-sectional study of 210 participants (8-15 years) was performed. Unstimulated saliva was analyzed for total ALP via kinetic spectrophotometry. CVMI (I-VI) and Demirjian Index (DI; F-H) were scored from routine radiographs under blinded consensus. Group differences used ANOVA with effect sizes, and associations used Fisher's exact with effect size. Mean age was 12.4 years (SD 1.68). ALP differed across CVMI stages (F(5,204) = 22.7, p < 0.001; η2 = 0.36, large), peaking at CVMI II (23.67 ± 6.92 U/L) and declining thereafter; key standardized contrasts were large (e.g., III > VI g = 4.58, II > VI g = 3.64; Tukey-adjusted p < 0.001). ALP did not vary across DI (F(2,207) = 0.59, p = 0.554; η2 = 0.006, trivial). CVMI-DI association was small (Fisher p = 0.179; Cramér's V = 0.06). Total salivary ALP aligns strongly with skeletal maturation and may serve as a practical adjunct for growth assessment, whereas single-tooth DI shows limited concordance with skeletal stage or ALP.