ISIurii R. Snigur

Iurii R. Snigur

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Iurii R. Snigur has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ERRORS AND COMPLICATIONS OF METAL-CERAMIC AND ALL-CERAMIC RESTORATIONS MANUFACTURED USING DIGITAL AND CONVENTIONAL PROTOCOLS

    by Iu.R. Snigur, P.A. Hasiuk, O.O. Stakhanska, Iu.M. Martyts, O.YA. Vydoinyk

    The purpose of the study. To analyze errors and complications recorded during the delivery and functional performance of metal-ceramic restorations and metal-free ceramic restorations manufactured using digital and conventional fabrication protocols. Materials and methods of the study. A prospective clinical monitoring study was conducted to perform a comparative analysis of the effectiveness of digital fabrication protocols in the production of metal-ceramic and metal-free fixed prosthetic restorations during prosthetic rehabilitation. In addition, the effectiveness of the digital protocol was compared with that of the conventional analog protocol for metal-ceramic restorations with respect to their influence on clinically significant functional parameters. The study was carried out in the dental clinics “DentaS” and “Dental Art” (Ternopil, Ukraine). Clinical monitoring covered both the delivery stage and the functional performance of different types of restorations over a follow-up period ranging from 14 to 24 months. Results. The obtained results indirectly indicate that the implementation of a digital protocol in the fabrication of metal-ceramic restorations does not provide significant clinical or technical advantages, nor does it offer substantial additional benefits compared with the conventional analog fabrication method. The frequency of complications and errors observed during the fixation and functional stages was comparable between the two protocols across most of the analyzed parameters. The study findings also demonstrate that the use of a digital protocol in the fabrication of metal-free restorations does not show pronounced advantages over a hybrid protocol, as the incidence of both technical and biological complications remains comparable. At the same time, both protocols involve the use of scanning technologies, albeit at different stages of the fabrication process. Conclusions. The results indicate that the incorporation of a digital protocol using intraoral scanning in prosthetic rehabilitation with metal-ceramic restorations does not lead to a significant improvement in fabrication accuracy or long-term clinical reliability compared with the conventional analog protocol. In contrast, for zirconia-based restorations with ceramic veneering, the application of a digital approach is associated with more stable outcomes in both technical and biological aspects. Despite the absence of statistically significant advantages of the digital protocol in the fabrication of metal-ceramic restorations, its further development remains justified given the high prevalence of this type of restoration and the successful implementation of digital workflows in the production of metal-free prosthetic restorations.

  • Open Access

    PECULIARITIES OF APPLYING INTRAORAL SCANNING TECHNOLOGY IN DENTAL PRACTICE BASED ON SURVEY DATA

    by Iu.R. Snigur, P.A. Hasiuk

    Introduction. The accuracy of the fit of prosthetic restorations to prepared abutments is one of the key determinants of their clinical success. At the same time, the scientific literature continues to report variability in accuracy indicators for restorations fabricated using digital and conventional workflows, based on studies with different levels of evidence. Aim: to analyze the prevalence of intraoral scanning technology use in private dental healthcare institutions based on data obtained from a questionnaire survey. Participants and Methods. A survey was conducted among 67 private dental healthcare institutions in Ternopil, including multidisciplinary dental clinics and private dental offices. The results showed that, at the time of the survey, intraoral scanning technology was used in 32 institutions, corresponding to a prevalence of 47.76% at the clinical level. In addition, an online survey was conducted among an independent cohort of 118 dentists using a questionnaire distributed through professional social media communities. The design of the online questionnaire was identical to that used to assess the use of intraoral scanning technology in dental clinics. Results. Among 79 dentists working in clinics equipped with an intraoral scanner, 30 specialists (37.97%) reported experience using intraoral scanning for less than one year, 24 (30.38%) for more than one year but less than three years, and 25 (31.65%) for more than three years. The relatively balanced distribution of specialists by experience suggests a steady and clinically significant increase in the accessibility of digital technologies for dentists in private healthcare institutions over the past three years. It should be noted that 35 out of 67 dental institutions (52.24%) reported the absence of an intraoral scanner in their technical equipment. Thus, the level of implementation of intraoral scanning technology in private dental healthcare institutions can be considered moderate, although it demonstrates a stable upward trend, currently covering approximately half (47.76%) of clinics and more than one third (37.29%) of individual practitioners. These findings reflect an active phase of digital transformation in contemporary dental practice. Despite this progress, the primary application of intraoral scanners remains limited to their basic function is the acquisition of digital impressions that is confirmed by the fact that more than two thirds of dentists (69.62%) use the technology only as an alternative to conventional elastomeric impression materials, without employing specialized software capabilities for diagnostic evaluation, treatment planning, or analytical modeling. Conclusion. A comparative analysis of the clinical stages of technology application showed that the vast majority of dentists (70.37%) use intraoral scanning exclusively at the prosthetic stage of treatment, avoiding its application during the preliminary digital analysis of occlusal relationships or for monitoring changes in dental status during preparatory treatment. This indicates insufficient integration of digital technologies into the early phases of clinical planning and suggests a certain underestimation of their potential to improve the predictability and accuracy of comprehensive prosthetic rehabilitation.


  • Open Access

    PECULIARITIES OF THE ACCURACY OF FITTING ORTHOPEDIC CONSTRUCTIONS PRODUCED ACCORDING TO DIGITAL AND ANALOG PROTOCOLS

    by Iurii R. Snigur, Petro A. Hasiuk, Serhii G. Zubchenko, Dmytro V. Kalashnikov, Tetiana V. Perepelova, Iryna V. Bodnarchuk, Юрій Р. Снігур, Дмитро В. Калашніков

    Introduction. The accuracy of fitting orthopedic constructions to the hardened support is one of the predictors of their successful functioning in clinical conditions, while the scientific literature still notes somehow divergent indicators regarding the accuracy of fitting orthopedic constructions made according to digital and analog protocols as reported in studies with varying levels of methodological refinement. According to a randomly controlled clinical study, the use of classical elastomeric prints in cases of manufacturing non-removable orthopedic constructions based on all available teeth was characterized by spending less time and providing a higher level of efficiency in terms of workflow organization than the use of an intraoral scanner with the same purpose. Aim. To conduct a detailed analysis and systematization of fitting orthopedic constructions produced according to digital and analog protocols, on the basis of a literature review. Materials and methods. The literature review was conducted using databases such as Scopus, Web of Science, PubMed, Crossref, and Google Scholar for the period 2014-2024 years. Results and discussion. The analysis of scientific sources showed that nowadays there is a pronounced tendency toward increasing the amount of digital technologies involvement during certain stages of dental patients treatment and the manufacture of orthopedic constructions, in particular, using intraoral scanning technology methods for obtaining prints, approaches to digital modeling of frame parts of prosthetic restorations or those in general with the possibility of their further milling or three-dimensional printing is becoming more and more common in orthopedic dentistry. The totality of these changes is associated with an increase in the share of the use of orthopedic constructions, the production of which can be optimized precisely with the implementation of digital technologies in the treatment process, such as all-zirconium and all-ceramic orthopedic restorations. Conclusions. The literature analysis reveals that the attention should be paid to the fact that both the developed approach and the proposed criteria should be clinically oriented, thus contributing to the objectification of the orthopedic treatment success prognosis in different time perspectives, as well as to the stratification of the treatment method choice in particular, taking into account the biomechanical prognosis for the tooth or group of teeth as supports in prosthetic restorations.


  • Open Access

    PECULIARITIES OF USING DIFFERENT TYPES OF FIXED PROSTHODONTIC RESTORATIONS DEPENDING ON THE MANUFACTURING MATERIAL IN THE COURSE OF COMPREHENSIVE DENTAL REHABILITATION

    by Iurii R. Snigur, Petro A. Hasiuk, Iryna V. Bodnarchuk

    Aim. Based on the analysis of current scientific literature, this study aims to evaluate the potential use of various types of fixed prosthodontic restorations depending on the manufacturing material during comprehensive dental rehabilitation. Materials and methods. A systematic review of publications selected from leading international scientometric databases was conducted. Bibliographic and analytical research methods were applied in the study. Results. There is a growing trend in the use of digital technologies in general, and intraoral scanning in particular, in clinical dental practice and during prosthodontic rehabilitation of dental patients. The increasing integration of digital dentistry into treatment processes is also associated with changes in the demand for different types of prosthodontic restorations. There is a notable prevalence of all-ceramic and monolithic zirconia restorations in clinics where digital technologies are implemented at the stages of diagnosis, treatment, and crown fabrication. At the same time, there is a parallel decline in the demand for restorations produced using analog methods involving manual work by dental technicians. Analysis of both domestic and foreign literature indicates that despite the achieved advancement, prosthetic treatment using intraoral scanning technologies still requires further study and improvement. Conclusions. Considering the above facts, it can be stated that the literature still lacks a clear differentiation in the frequency of the use of fixed prosthodontic restorations made from different materials. According to domestic studies, metal-ceramic restorations remain the most commonly used, while international studies show a preference for all-ceramic and monolithic zirconia restorations.

  • Open Access

    THE ROLE OF INTRAORAL SCANNING TECHNOLOGIES IN THE PROCESS OF ORTHOPEDIC REHABILITATION OF DENTAL PATIENTS WITH FIXED CONSRUCTIONS

    by Iurii R. Snigur, Petro A. Hasiuk, Iryna V. Bodnarchuk

    Introduction. Modern development of the dental industry in general and orthopedic dentistry in particular involves the use of different kinds of digital technologies while planning and complex rehabilitation of patients, contributing to the possibility of achieving higher levels of individualization and patient-oriented dental treatment. The updated capabilities of digital technologies include approaches for obtaining digital impressions using an intraoral scanner, which can be used for preliminary planning and modeling of changes in the dental status of patients with the possibility of their representation in a digital environment, coordinating the forecast of the achievement and the relevant results with the patient, and taking into account individual requests. Therefore, this issue requires more careful study. Aim. The aim of the article is to evaluate the use of intraoral scanning technologies in the process of orthopedic rehabilitation of dental patients with non-removable structures based on the analysis of modern scientific literature. Results. There is a trend toward increasing usage of digital technologies in general and the method of intraoral scanning in particular in clinical dental practice and in the course of orthopedic rehabilitation of dental patients. The increase in the level of involvement of digital dentistry methods in the treatment process is also associated with a change in the demand for various types of orthopedic structures, which is reflected particularly in the prevalence of using all-ceramic and zirconium constructions in clinics, where the implementation of digital technologies at the stages of diagnosis, treatment, and manufacture of crowns is ensured, with a simultaneous decrease in the demand for constructions that require an analog manufacturing method involving manual work by dental technicians. Analysis of the Ukrainian and foreign literature proves that, despite all the successful research in this sphere, the orthopedic treatment of patients using intraoral scanning technologies still requires further study and improvement. Conclusions. Having taken into consideration all the above-mentioned facts, we can state that the scientific literature still does not reflect a clear consensus regarding the existing trend toward increased usage of digital technologies in dental orthopedic practice and the continued use of widely spread constructions, with a significant prevalence of metal-ceramic types of orthopedic restorations, in the context of the possible adaptation of the digital approach to the manufacture of this type of restoration.