ASAnuja De Silva

Anuja De Silva

*This is an algorithmically generated author record based on publicly available information.

Anuja De Silva has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enabling single-exposure metal logic with high-NA lithography

    by Shubhankar Das, Victor Blanco, Shruti Jambaldinni, Anuja De Silva, Joern-Holger Franke, Etienne de Poortere, Sandip Halder, Philippe Leray

    We present a comprehensive study of pitch 20 nm (P20) and pitch 18 nm (P18) metal logic designs, including regular tip-to-tip (T2T) and logic structures using bright-field masks in combination with dry metal-oxide resist. Patterning performance is evaluated across multiple source configurations and resist process conditions. For P20 T2T, we demonstrate a ∼13 nm T2T-CD (critical dimension) with local CD uniformity (LCDU) below 3 nm. For P18, single high-NA EUV exposure enables 18 nm T2T-CD with LCDU<3 nm. Further scaling is achieved using a directional etch at resist, reducing T2T-CD to ∼9 nm while maintaining LCDU ∼3 nm in P18 structure. To assess manufacturability, large-area defectivity is investigated using e-beam inspection after etch into hardmask for P20 metal logic structures. These results demonstrate the feasibility of single-patterning approaches for advanced metal logic and support the adoption of High-NA EUV for damascene integration.

  • Evaluating OPC performance on novel EUV masks: Mo/Si vs Ru/Si multilayer effects on high-NA random logic via designs

    by Ling Ee Tan, Jeroen Van de Kerkhove, Fergo Treska, Christina Baerts, Bhavishya Chowrira, Wonchan Lee, Werner Gillijns, Vicky Philipsen, Ching-Chung Huang, Anuja De Silva, et al.

    EUV imaging performance strongly depends on exploration in mask absorber and multilayer materials. This study evaluates molybdenum / silicium (Mo/Si) and ruthenium / silicium (Ru/Si) multilayer mirror masks for imec random logic via patterning at sub-30 nm pitch. Both bright-field and dark-field mask tones are investigated using resolution enhancement techniques (RET), including optical proximity correction (OPC) and source–mask optimization (SMO). Metal-oxide resist (MOR) with negative tone development (NTD) is applied for bright-field exposures, while chemically amplified resist (CAR) with positive tone development (PTD) is used for dark-field exposures to pattern contact holes on wafers. Experimental results, supported by simulations, show that Ru/Si multilayers provide improved image contrast and reduced mask 3D effects. Based on combined wafer and simulation data, optimal process conditions are identified, and recommendations are provided for mask selection, RET configuration, and OPC strategy for advanced EUV via patterning.

  • Extendibility of 3D-engineered resist films for 0.55 NA EUV lithography: bright-field hexagonal contact holes and random via patterning

    by Shruthi Santhosh Nair, Wonchan Lee, Ching-Chung Huang, Mihir Gupta, Ling Ee Tan, Zhengtao Chen, Hyo Seon Suh, Anuja De Silva

    Patterning with 0.55 NA presents significant challenges for conventional photoresists, with achieving a defect-free depth of focus (DoF) emerging as one of the most critical limitations. Dry-deposited and dry-developed 3D engineered resists have previously been shown to offer strong potential for extending the defect-free process window. In this work, we present systematic approaches to optimize the performance of 3D engineered resists and discuss the remaining challenges associated. Test vehicles based on C2C 28 nm Hex CH and P30 random via patterns printed on a 0.55 NA EUV system are discussed. For Hex CH, the impact of 3D dry resist configuration is investigated with respect to depth of focus, dose-to-LCDU trade-off, and defectivity. Optimization of PEB, dry development, and pattern-transfer etch is explored to extend the performance of the 3D engineered dry resist, showing dose-reduction benefits from PEB and DD optimization and revealing merging-cliff modulation at C2C 32 nm with etch optimization, which will be further complemented by STEM studies. In addition, we discuss the evaluation results of the vertical profile modulation capability of 3D engineered resist along with the dose benefit provided by the bright field imaging for random logic via.

  • Dry resist process development toward depth of focus improvement in high NA EUV lithography

    by Ching-Chung Huang, Ali Haider, Zhengtao Chen, Francesco Gullo, Mohand Brouri, Shruti Jambaldinni, Andrew Lushington, Nizan Kenane, Boris Volosskiy, Mihir Gupta, et al.

    High numerical aperture (NA) extreme ultraviolet lithography enables device scaling and improves resolution. However, it also brings the challenge of reduced depth of focus (DOF) due to the optics with increased NA. New resist innovations are being targeted toward addressing this patterning challenge. We present how dry deposited and dry developed resists can be used to improve the focus window. Modulating the resist composition in the vertical direction and co-optimizing the process conditions have shown benefits in improving patterning metrics, including DOF. Test vehicles based on bright field pitch 32 nm hexagonal contact hole with 0.33 NA and pitch 18 nm line/space imaging with 0.55 NA are discussed to showcase the patterning improvements.


  • OPC and modeling solution to support 0.55 NA EUV stitching

    by Dongbo Xu, Qinglin Zeng, Xuefeng Zeng, Werner Gillijns, Vicky Philipsen, Kalaivanan Loganathan, Shubhankar Das, Kia Woon Mah, Victor Blanco, Anuja De Silva, et al.

    BackgroundThe new high numerical aperture (0.55 NA) extreme ultraviolet lithography (EUVL) machine has been developed, which uses an anamorphic projection system with the demagnification of 4× in x-direction and 8× in y-direction. Due to the unchanged 6 in. mask, 0.55 NA EUVL reduces the exposure field size to half-field (26×16.5 mm2). Therefore, the in-die stitching between two exposures might be needed for applications requiring a larger than half-field size. To achieve in-die stitching in practical applications at advanced nodes, performing model-based optical proximity correction (OPC) is an essential step.AimTo build an accurate OPC model, the interaction effects between two stitching fields require some special considerations, including aerial image interaction, optical proximity effect among the stitching patterns, mask absorber reflection, black border proximity effect, and the stray light from the neighboring fields effect. All these effects must be captured by specific models and corrected during OPC. In this paper, we will study the model accuracy and design decomposition rules at the stitching region and provide a solution from an EDA perspective.ApproachIn this paper, the in-die stitching effects and solutions are investigated using a Ta-based dark-field mask. To study the model accuracy at the stitching region, various stitching test patterns have been designed and placed on imec 0.55 NA test masks, and the wafer data are collected from the 0.55 NA EUV scanner at the joint ASML-imec High NA EUV Lithography Lab. To enable effective in-die stitching, the impact of design decompositions on the stitching performance is investigated by performing stitching OPC with the built double exposure OPC model.ResultsThe model accuracy has been evaluated using the obtained wafer data, both for single and double exposures in the stitching region. It is important to use a smart cut approach to decompose the design before running OPC. Comprehensive results provide a detailed comparison between double exposure in the stitching region and single exposure through simulation, with particular emphasis on their respective impacts on overall stitching performance.ConclusionsIn this paper, the in-die stitching effects and OPC solution have been investigated under idealized lithographic conditions, where mask errors, overlay errors between two exposures, and the resist delay effect are not considered. Our initial investigations indicate that double exposure shows promising model accuracy with the existing calibrated resist model (based on single exposure data), and new resist model calibrations might not be necessary for the stitching region. Notably, the wafer critical dimension (CD) in the double exposure region is sensitive to flare values, resulting in wafer CD shifts and requiring accurate flare characterization. The smart cut approach for design decomposition effectively mitigates edge placement error issues across the stitching line. By employing this smart cut approach, the stitching OPC can deliver patterning performance similar to single exposure OPC, with only slightly degraded exposure latitude.


  • E-beam metrology and line local critical dimension uniformity of thin dry resist films for high numerical aperture extreme ultraviolet lithography

    by Mohamed Zidan, Gian Francesco Lorusso, Danilo De Simone, Anuja De Silva, Ali Haider, Elisseos Verveniotis, Alain Moussa, Stefan De Gendt

    BackgroundLithography advancements require resist layer thickness reduction, essential to cope with the low depth of focus characteristic of high numerical aperture extreme ultraviolet lithography (High NA EUVL). However, such a requirement poses serious challenges in terms of resist process metrology and characterization, as patterns in thin resist suffer from low contrast, which may affect the performance of the edge detection algorithms used for image analysis, ultimately impacting metrology.AimWe aim to investigate the impact of reducing the film thickness of the dry photoresist on the E-beam metrology and line local critical dimension uniformity (LCDU).ApproachThin dry resist films from 10 to 30 nm are patterned at pitches 24, 28, and 32 nm using EUVL. A standard critical dimension scanning electron microscope (CDSEM) is used to perform E-beam metrology. The captured SEM images are analyzed using software to extract the parameters of interest, such as the critical dimension (CD), power spectral density (PSD), unbiased line width roughness (uLWR), LWR correlation length, signal-to-noise ratio (SNR), and line LCDU for a range of features with lengths from 12 to 50 nm. Furthermore, the experimental results of the line LCDU of a range of feature lengths and roughness parameters are plotted for different process conditions of thickness and pitch in a normalized way.ResultsThe results indicate that the dry resist shows good CDSEM imaging contrast and high SNR even at the thinnest resist thickness. This enables extracting a reliable uLWR measurement without the need to increase the number of frames to modulate the SNR. Moreover, it has LWR correlation length of around 2.5 nm. By thinning the resist thickness, the uLWR and line LCDU increase, and the SNR and the LWR correlation length decrease. Finally, when normalizing the line LCDU to uLWR and the feature length to the correlation length, the resulting curves of the different process conditions of the thickness and pitch overlap with each other, following an analytical model that relates the line LCDU to the resist roughness parameters.ConclusionWe showed the impact of reducing the dry resist thickness on E-beam metrology and line LCDU for features foreseen for High NA EUVL. The dry resist has good imaging contrast, LWR correlation length of around 2.5 nm, and the line LCDU depends on the resist thickness (uLWR and LWR correlation length for each particular thickness). With such a dataset, we demonstrated an overlap between the normalized curves of the line LCDU to the uLWR and the feature length to the correlation length for the different process conditions of thickness and pitch. The uLWR and correlation length are the knobs to achieve good patterning uniformity for a given feature length.


  • Open Access

    Special Section Guest Editorial: Non-chemically Amplified Resists for EUV Lithography

    by Anuja De Silva, Yasin Ekinci

    Special section editors Anuja De Silva and Yasin Ekinci introduce the Special Section on Non-chemically Amplified Resists for EUV Lithography.

  • Fundamental characterization of stochastic variation for improved single-expose extreme ultraviolet patterning at aggressive pitch

    by Jennifer Church, Luciana Meli, Jing Guo, Martin Burkhardt, Chris A. Mack, Anuja De Silva, Karen E. Petrillo, Mary A. Breton, Ravi K. Bonam, Romain Lallement, et al.

    Background: With aggressive scaling of single-expose (SE) extreme ultraviolet (EUV) lithography to the sub-7-nm node, stochastic variations play a prominent role in defining the lithographic process window (PW). Fluctuations in photon shot noise, absorption, and subsequent chemical reactions can lead to stochastic failure, directly impacting electrical yield. Aim: Fundamental characterization of the mode and magnitude of these variations is required to define the threshold for failure. Approach: A complementary series of techniques is enlisted to probe the nature and modulation of stochastic variation in SE EUV patterning. Unbiased line edge roughness (LER), local critical dimension uniformity (LCDU), and defect inspection techniques are employed to monitor the frequency of stochastic variations leading to failures in line/space (L/S) and via patterning. Results: When characterizing different resists and illumination conditions, there is no change in unbiased LER or via LCDU with increasing critical dimension (CD). Stochastic defect density is correlated with CD for both L/S and via arrays, and there is a strong correlation with L/S electrical yield data. Conclusions: Traditional 3σ LER and via LCDU measurements are not sensitive enough to define and improve PW. For PW centering and yield improvement, stochastic defect inspection is a necessity.


  • Defect detection strategies and process partitioning for single-expose EUV patterning

    by Luciana Meli, Karen Petrillo, Anuja De Silva, John Arnold, Nelson Felix, Chris Robinson, Benjamin Briggs, Shravan Matham, Yann Mignot, Jeffrey Shearer, et al.

    The key challenge for enablement of a second node of single-expose EUV patterning is understanding and mitigating the patterning-related defects that narrow the process window. Typical in-line inspection techniques, such as broadband plasma and e-beam systems, find it difficult to detect the main yield-detracting defects postdevelop, and thus understanding the effects of process improvement strategies has become more challenging. New techniques and methodologies for detection of EUV lithography defects, along with judicious process partitioning, are required to develop process solutions that improve yield. This paper will first discuss alternative techniques and methodologies for detection of lithography-related defects, such as scumming and microbridging. These strategies will then be used to gain a better understanding of the effects of material property changes, process partitioning, and hardware improvements, ultimately correlating them directly with electrical yield detractors.


  • Inorganic hardmask development for extreme ultraviolet patterning

    by Anuja De Silva, Ashim Dutta, Luciana Meli, Yiping Yao, Yann Mignot, Jing Guo, Nelson M. Felix

    Extreme ultraviolet (EUV) patterning offers an opportunity to explore hardmask materials and patterning approaches. Traditional patterning stacks for deep ultraviolet patterning have been based on optimizing multilayer schemes for reflectivity control and pattern transfer. At the EUV wavelength, the patterning challenges are dominated by stochastics and aspect ratio control. This offers an opportunity to think differently about underlayer design for sub-36-nm pitch patterning. The choice of hardmask can be used to modulate postlitho defectivity to mitigate the stochastics effects and enable more efficient pattern transfer. Through different case studies this paper will explore a range of silicon-based inorganic hardmasks for sub-36-nm EUV patterning. How film properties dominate patterning performance will be studied systematically. The relative merits of patterning a chemically amplified organic resist directly on an inorganic hardmask or having different types of organic adhesion promoters as an intermediate layer will also be presented.