Seungmin Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Seungmin Yu has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Byoung-Suhk Kim
Department of Organic Materials and Textile Engineering, Jeonbuk National University, Jeonju 561756, Republic of Korea
1 shared publication - Hak Yong Kim
Department of Nano Convergence Engineering, Jeonbuk National University, Jeonju 561-756, Republic of Korea
1 shared publication - Hyun-Jae Cho
Department of Organic Materials and Textile Engineering, Jeonbuk National University, 567 Baekjedaero, Deokjin-gu, Jeonju-si 54896, Jeollabuk-do, Republic of Korea
1 shared publication - Tae Hoon Ko
Department of Nano Convergence Engineering, Jeonbuk National University, Jeonju 561756, Republic of Korea
1 shared publication - Yong-Sik Chung
Department of Organic Materials and Textile Engineering, Jeonbuk National University, Jeonju 561756, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 30 August 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (17) , 1335
Draw-Induced Structural Optimization of PAN-Based Carbon Fibers During High-Temperature Carbonization
This study investigates the effect of tensile strain during high-temperature carbonization on the microstructural development and mechanical properties of polyacrylonitrile (PAN)-based carbon fibers. The wet-spun stabilized PAN precursor fibers were carbonized at 1400 °C under various tensile draw ratios (0%, 5%, 10%, and 15%), followed by stress-free graphitization at 2400 °C in an argon atmosphere for 1 h to isolate the effects of the carbonization-stage tension. Structural characterization using XRD, 2D-XRD, Raman spectroscopy, and HR-TEM revealed that moderate tensile strain (5–10%) promoted significant improvements in crystallinity, orientation, and graphene layer alignment. Notably, the fiber drawn at 10% performed the best, with a reduced interlayer spacing (d002), increased lateral crystallite size (La), high orientation factor, and minimal turbostratic disorder. These structural developments translated into the best mechanical properties, including a tensile strength of ~2.44 GPa, a Young’s modulus of ~408.6 GPa, and the highest measured density (1.831 g/cm3). In contrast, excessive strain (15%) induced microstructural defects and reduced performance, underscoring the detrimental effects of overstretching. The findings highlight the critical role of draw control during carbonization in optimizing the structure–property relationships of carbon fibers, offering valuable insight for the design of high-performance fiber processing strategies.
- 30 August 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (17) , 1335
Open AccessDraw-Induced Structural Optimization of PAN-Based Carbon Fibers During High-Temperature Carbonization
This study investigates the effect of tensile strain during high-temperature carbonization on the microstructural development and mechanical properties of polyacrylonitrile (PAN)-based carbon fibers. The wet-spun stabilized PAN precursor fibers were carbonized at 1400 °C under various tensile draw ratios (0%, 5%, 10%, and 15%), followed by stress-free graphitization at 2400 °C in an argon atmosphere for 1 h to isolate the effects of the carbonization-stage tension. Structural characterization using XRD, 2D-XRD, Raman spectroscopy, and HR-TEM revealed that moderate tensile strain (5–10%) promoted significant improvements in crystallinity, orientation, and graphene layer alignment. Notably, the fiber drawn at 10% performed the best, with a reduced interlayer spacing (d002), increased lateral crystallite size (La), high orientation factor, and minimal turbostratic disorder. These structural developments translated into the best mechanical properties, including a tensile strength of ~2.44 GPa, a Young’s modulus of ~408.6 GPa, and the highest measured density (1.831 g/cm3). In contrast, excessive strain (15%) induced microstructural defects and reduced performance, underscoring the detrimental effects of overstretching. The findings highlight the critical role of draw control during carbonization in optimizing the structure–property relationships of carbon fibers, offering valuable insight for the design of high-performance fiber processing strategies.