Manuel Pitz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Manuel Pitz has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Antonello Monti
Fraunhofer Institute for Applied Information Technology
4 shared publications - Ferdinanda Ponci
E.ON Energy Research Center, Institute for Automation of Complex Power Systems, RWTH Aachen University, Aachen, Germany
2 shared publications - Niklas Eiling
Institute for Automation of Complex Power Systems, RWTH Aachen University, Germany
2 shared publications - Alexandra Bach
Institute for Automation of Complex Power Systems, RWTH Aachen University, Germany
1 shared publication - Edoardo De Din
Institute of Climate and Energy Systems: Energy Systems Engineering (ICE-1), Forschungszentrum Jülich, Jülich, Germany
1 shared publication Marija Stevic
Institute for Automation of Complex Power Systems, RWTH Aachen University, Germany
1 shared publication
Latest Publications
- Open Access
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 20 (1) , 99-110
Distributed and Reconfigurable Communication System for Open Source Real-Time Simulations of Power Systems
Hardware for real-time simulations of power systems is often highly specialized, proprietary, inflexible, and expensive. A consequence is that many systems have low interoperability, are not conducive to innovation, are not extensible, and are inaccessible to many researchers and small companies. While there have been efforts to build open source real-time simulation software, there is a lack of an open implementation of the infrastructure that facilitates interconnecting the hardware and software components of a real-time simulation. In this article, we present an open source implementation of a communication system that empowers real-time simulation software to be used in cosimulations and hardware-in-the-loop simulations that require simulation equipment, measurement devices, and power system hardware to be interconnected using real-time capable communication channels. The system is designed to enable hassle-free reconfiguration without the need for physical rewiring, even when simulation components are distributed across different locations. We show the applicability by connecting the system to the open source simulation software DPsim and performing a latency benchmark, a cosimulation, and a power hardware-in-the-loop simulation. Our results show that our system is capable of achieving a time step of $\text{5} \,\mu {\text{s}}$ and thus has a performance similar to that of commercial real-time simulators. Our communication system is based on established standards and is interoperable with many protocols and data formats. Other researchers can therefore use our system as a basis for interfacing arbitrary components to real-time simulations.
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 20 (1) , 99-110
Open AccessDistributed and Reconfigurable Communication System for Open Source Real-Time Simulations of Power Systems
Hardware for real-time simulations of power systems is often highly specialized, proprietary, inflexible, and expensive. A consequence is that many systems have low interoperability, are not conducive to innovation, are not extensible, and are inaccessible to many researchers and small companies. While there have been efforts to build open source real-time simulation software, there is a lack of an open implementation of the infrastructure that facilitates interconnecting the hardware and software components of a real-time simulation. In this article, we present an open source implementation of a communication system that empowers real-time simulation software to be used in cosimulations and hardware-in-the-loop simulations that require simulation equipment, measurement devices, and power system hardware to be interconnected using real-time capable communication channels. The system is designed to enable hassle-free reconfiguration without the need for physical rewiring, even when simulation components are distributed across different locations. We show the applicability by connecting the system to the open source simulation software DPsim and performing a latency benchmark, a cosimulation, and a power hardware-in-the-loop simulation. Our results show that our system is capable of achieving a time step of $\text{5} \,\mu {\text{s}}$ and thus has a performance similar to that of commercial real-time simulators. Our communication system is based on established standards and is interoperable with many protocols and data formats. Other researchers can therefore use our system as a basis for interfacing arbitrary components to real-time simulations.
- Open Access
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-14
Operation and Uncertainty Characterization of a Standalone Wideband-Frequency Grid Impedance Measurement Device
The increasing proliferation of power electronic converters challenges the stability of modern grids. Past research has explained harmonic interaction through an impedance-based framework. This work proposes a standalone wideband-frequency grid impedance (WFZ) device to measure the grid impedance over a wide frequency range. Being a small-signal method, no significant disturbances are introduced in the grid. This paper proposes two operational sequences for the WFZ device: sequential and parallel method; and compares the two methods based on measurement time, accuracy and total harmonic distortion (THD) levels. The robustness of the proposed device is further validated by testing under time-varying grid voltage harmonics and in the presence of a parallel-connected converter. The proposed measurement device is validated via numerical simulations and experimentally via a low power prototype. Due to the lack of standard methods to characterize such a device, this paper proposes two characterization methods: wideband and per-frequency characterization. Wideband characterization allows the overall accuracy calculation of the device whereas per-frequency characterization allows uncertainty calculation as a function of frequency. Characterization of the prototype device is carried out by applying the above methods using the experimental data.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-14
Open AccessOperation and Uncertainty Characterization of a Standalone Wideband-Frequency Grid Impedance Measurement Device
The increasing proliferation of power electronic converters challenges the stability of modern grids. Past research has explained harmonic interaction through an impedance-based framework. This work proposes a standalone wideband-frequency grid impedance (WFZ) device to measure the grid impedance over a wide frequency range. Being a small-signal method, no significant disturbances are introduced in the grid. This paper proposes two operational sequences for the WFZ device: sequential and parallel method; and compares the two methods based on measurement time, accuracy and total harmonic distortion (THD) levels. The robustness of the proposed device is further validated by testing under time-varying grid voltage harmonics and in the presence of a parallel-connected converter. The proposed measurement device is validated via numerical simulations and experimentally via a low power prototype. Due to the lack of standard methods to characterize such a device, this paper proposes two characterization methods: wideband and per-frequency characterization. Wideband characterization allows the overall accuracy calculation of the device whereas per-frequency characterization allows uncertainty calculation as a function of frequency. Characterization of the prototype device is carried out by applying the above methods using the experimental data.
- Open Access
- 29 August 2025
- Published by The Open Journal in Journal of Open Source Software
- Vol. 10 (112) , 8401
VILLASnode: An Open-Source Real-time Multi-protocol Gateway
VILLASnode is a multi-protocol gateway, designed to facilitate real-time data exchange between various components of geographically-distributed real-time experiments. Components can be testbeds, digital real-time simulators, software tools, and physical devices. It is designed for the co-simulation of power system and related energy applications. VILLASnode was originally designed for the co-simulation of electrical networks, but since then was further extended to cover a larger variety of use cases and domains. VILLASnode serves as the gateway that connects components across different infrastructures by providing a set of protocols and customized third-party implementations, e.g., different simulators. It enables seamless collaboration in research and testing environments while safeguarding the intellectual property of the infrastructures. The components of every infrastructure appear as a black box. The infrastructure does not need to share models or confidential information. VILLASnode is a set of Linux command line tools and shared library. It can be installed from source or via a OCI container. It is written in C/C++ and designed in a modular and extensible way.
- 29 August 2025
- Published by The Open Journal in Journal of Open Source Software
- Vol. 10 (112) , 8401
Open AccessVILLASnode: An Open-Source Real-time Multi-protocol Gateway
VILLASnode is a multi-protocol gateway, designed to facilitate real-time data exchange between various components of geographically-distributed real-time experiments. Components can be testbeds, digital real-time simulators, software tools, and physical devices. It is designed for the co-simulation of power system and related energy applications. VILLASnode was originally designed for the co-simulation of electrical networks, but since then was further extended to cover a larger variety of use cases and domains. VILLASnode serves as the gateway that connects components across different infrastructures by providing a set of protocols and customized third-party implementations, e.g., different simulators. It enables seamless collaboration in research and testing environments while safeguarding the intellectual property of the infrastructures. The components of every infrastructure appear as a black box. The infrastructure does not need to share models or confidential information. VILLASnode is a set of Linux command line tools and shared library. It can be installed from source or via a OCI container. It is written in C/C++ and designed in a modular and extensible way.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Implementation of the online distributed voltage control based on containers
Modern distribution grids require the development of advanced control solutions to solve voltage issues by coordinating distributed generators and storage systems. In particular, distributed control solutions represent innovative and flexible approaches to control the voltage by means of a communication network. This paper presents the implementation of a distributed voltage control with containers, which allow a faster and more versatile implementation of the control along with the ability to model the distributed control as if it were implemented in the field. The scalability of the distributed control implemented with the containers has been demonstrated in terms of nodes activation and data exchanged by means of numerical simulations.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Implementation of the online distributed voltage control based on containers
Modern distribution grids require the development of advanced control solutions to solve voltage issues by coordinating distributed generators and storage systems. In particular, distributed control solutions represent innovative and flexible approaches to control the voltage by means of a communication network. This paper presents the implementation of a distributed voltage control with containers, which allow a faster and more versatile implementation of the control along with the ability to model the distributed control as if it were implemented in the field. The scalability of the distributed control implemented with the containers has been demonstrated in terms of nodes activation and data exchanged by means of numerical simulations.