Mengdong Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mengdong Ma has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- An Liu
State Key Laboratory of Crane Technology, Yanshan University, Qinhuangdao 066004, China
1 shared publication - Baozhong Li
Center for High Pressure Science (CHiPS), State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
1 shared publication - Bin Du
School of Physics and Materials Science Guangzhou University Guangzhou People's Republic of China
1 shared publication - Bing Liu
Center for High Pressure Science (CHiPS), State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
1 shared publication - Dongli Yu
Center for High Pressure Science (CHiPS), State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
1 shared publication - Hang Zhou
Center for High Pressure Science (CHiPS), State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
1 shared publication
Latest Publications
- Open Access
- 4 November 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
Electronic-instability-driven phase separation enables grain-boundary toughening in high-entropy carbides
High-entropy carbides (HECs) can exhibit enhanced phase stability, although elemental segregation and phase separation may occur under certain conditions. However, how intrinsic phase instability evolves under high pressure and how it can be exploited to regulate mechanical properties remain insufficiently understood. Here, (Hf(1−X)/4Zr(1−X)/4Nb(1−X)/4Ta(1−X)/4CoX)C (X = 0.14, 0.18, and 0.20) was investigated by integrating first-principles calculations with high-pressure sintering. The decomposition Gibbs free energy remains negative from 0 to 6 GPa, indicating an intrinsic thermodynamic driving force for Co segregation. Electronic-structure analysis reveals that pressure amplifies the bonding asymmetry between the stable transition-metal–C framework and the comparatively weaker Co–C interactions, as evidenced by the opposite pressure-dependence change in their integrated crystal orbital Hamiltonian population values. This bonding asymmetry is accompanied by local structural rearrangement, with the first Co–Co radial distribution function (RDF) peak shifting from 3.14 to 3.10 Å and increasing in intensity from 15.97 to 24.50. Experimentally, Co segregates into a ductile FCC phase preferentially distributed along grain boundaries, accompanied by an increase in the low-angle grain boundary fraction from 20.2% to 37.9%, indicating a possible contribution to local strain accommodation. The resulting heterogeneous microstructure facilitates crack deflection and branching, leading to an increase in fracture toughness from 4.5 ± 0.2 to 5.0 ± 0.2 MPa·m1/2. These findings demonstrate that pressure-driven electronic instability can be exploited to transform intrinsic phase instability into beneficial microstructural heterogeneity, providing a new strategy for toughening high-entropy ceramics.
- 4 November 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
Open AccessElectronic-instability-driven phase separation enables grain-boundary toughening in high-entropy carbides
High-entropy carbides (HECs) can exhibit enhanced phase stability, although elemental segregation and phase separation may occur under certain conditions. However, how intrinsic phase instability evolves under high pressure and how it can be exploited to regulate mechanical properties remain insufficiently understood. Here, (Hf(1−X)/4Zr(1−X)/4Nb(1−X)/4Ta(1−X)/4CoX)C (X = 0.14, 0.18, and 0.20) was investigated by integrating first-principles calculations with high-pressure sintering. The decomposition Gibbs free energy remains negative from 0 to 6 GPa, indicating an intrinsic thermodynamic driving force for Co segregation. Electronic-structure analysis reveals that pressure amplifies the bonding asymmetry between the stable transition-metal–C framework and the comparatively weaker Co–C interactions, as evidenced by the opposite pressure-dependence change in their integrated crystal orbital Hamiltonian population values. This bonding asymmetry is accompanied by local structural rearrangement, with the first Co–Co radial distribution function (RDF) peak shifting from 3.14 to 3.10 Å and increasing in intensity from 15.97 to 24.50. Experimentally, Co segregates into a ductile FCC phase preferentially distributed along grain boundaries, accompanied by an increase in the low-angle grain boundary fraction from 20.2% to 37.9%, indicating a possible contribution to local strain accommodation. The resulting heterogeneous microstructure facilitates crack deflection and branching, leading to an increase in fracture toughness from 4.5 ± 0.2 to 5.0 ± 0.2 MPa·m1/2. These findings demonstrate that pressure-driven electronic instability can be exploited to transform intrinsic phase instability into beneficial microstructural heterogeneity, providing a new strategy for toughening high-entropy ceramics.
- Open Access
- 1 April 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (4)
Isotropic hexagonal boron nitride ceramics with high thermal conductivity and strength
The conventional fabrication of bulk van der Waals materials, such as hexagonal boron nitride (hBN), face significant challenges in sintering powder into structurally isotropic bulk forms. hBN has attracted considerable attention for applications under extreme conditions because of its excellent thermal stability, oxidation resistance, and electrical insulation. However, its strongly anisotropic layered structure typically results in poor mechanical performance and limited isotropy in bulk forms. In this study, we report the fabrication of isotropic hBN ceramics through controlled transformation of cubic BN (cBN) powders under spark plasma sintering conditions. The coexistence of randomly oriented hBN sheets and residual turbostratic BN (tBN) phases produces an isotropic microstructure that yields balanced mechanical and thermal properties. The ceramics exhibit a compressive strength of ~ 130 MPa and thermal conductivity of ~ 77 W·m-1·K-1, nearly independent of measurement direction. This thermally driven cBN → hBN transformation provides a new strategy for tailoring the microstructure and overcoming the intrinsic anisotropy of layered ceramics, paving the way for advanced insulating components used under harsh environments.
- 1 April 2026
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (4)
Open AccessIsotropic hexagonal boron nitride ceramics with high thermal conductivity and strength
The conventional fabrication of bulk van der Waals materials, such as hexagonal boron nitride (hBN), face significant challenges in sintering powder into structurally isotropic bulk forms. hBN has attracted considerable attention for applications under extreme conditions because of its excellent thermal stability, oxidation resistance, and electrical insulation. However, its strongly anisotropic layered structure typically results in poor mechanical performance and limited isotropy in bulk forms. In this study, we report the fabrication of isotropic hBN ceramics through controlled transformation of cubic BN (cBN) powders under spark plasma sintering conditions. The coexistence of randomly oriented hBN sheets and residual turbostratic BN (tBN) phases produces an isotropic microstructure that yields balanced mechanical and thermal properties. The ceramics exhibit a compressive strength of ~ 130 MPa and thermal conductivity of ~ 77 W·m-1·K-1, nearly independent of measurement direction. This thermally driven cBN → hBN transformation provides a new strategy for tailoring the microstructure and overcoming the intrinsic anisotropy of layered ceramics, paving the way for advanced insulating components used under harsh environments.
- Open Access
- 1 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (17) , 1341
In Situ Synthesis of RMB6-TMB2 Composite Nanopowders via One-Step Solid-State Reduction
RMB6-TMB2 (RM = rare earth elements, TM = transition metal elements) composites retain superior field emission properties of RMB6 while addressing its inherent mechanical limitations by constructing a eutectic structure with TMB2. Herein, an in situ route for synthesizing RMB6-TMB2 composite nanopowders with homogeneous phase distribution using reduction reactions was proposed. The LaB6-ZrB2 composite nanopowders were synthesized in situ for the first time using sodium borohydride (NaBH4) as both a reducing agent and boron source, with lanthanum oxide (La2O3) and zirconium dioxide (ZrO2) serving as metal sources. The effects of the synthesis temperature on phase compositions and microstructure of the composites were systematically investigated. The LaB6-ZrB2 system with a eutectic weight ratio exhibited an accelerated reaction rate, achieving a complete reaction at 1000 °C, 300 °C lower than that of single-phase ZrB2 synthesis. The composite phases were uniformly distributed even at nanoscale. The composite powder displayed an average particle size of ~170 nm when synthesized at 1300 °C. With the benefit of the in situ synthesis method, LaB6-TiB2, CeB6-ZrB2, and CeB6-TiB2 composite powders were successfully synthesized. This process effectively addresses phase separation and contamination issues typically associated with traditional mixing methods, providing a scalable precursor for high-performance RMB6-TMB2 composites.
- 1 September 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (17) , 1341
Open AccessIn Situ Synthesis of RMB6-TMB2 Composite Nanopowders via One-Step Solid-State Reduction
RMB6-TMB2 (RM = rare earth elements, TM = transition metal elements) composites retain superior field emission properties of RMB6 while addressing its inherent mechanical limitations by constructing a eutectic structure with TMB2. Herein, an in situ route for synthesizing RMB6-TMB2 composite nanopowders with homogeneous phase distribution using reduction reactions was proposed. The LaB6-ZrB2 composite nanopowders were synthesized in situ for the first time using sodium borohydride (NaBH4) as both a reducing agent and boron source, with lanthanum oxide (La2O3) and zirconium dioxide (ZrO2) serving as metal sources. The effects of the synthesis temperature on phase compositions and microstructure of the composites were systematically investigated. The LaB6-ZrB2 system with a eutectic weight ratio exhibited an accelerated reaction rate, achieving a complete reaction at 1000 °C, 300 °C lower than that of single-phase ZrB2 synthesis. The composite phases were uniformly distributed even at nanoscale. The composite powder displayed an average particle size of ~170 nm when synthesized at 1300 °C. With the benefit of the in situ synthesis method, LaB6-TiB2, CeB6-ZrB2, and CeB6-TiB2 composite powders were successfully synthesized. This process effectively addresses phase separation and contamination issues typically associated with traditional mixing methods, providing a scalable precursor for high-performance RMB6-TMB2 composites.