Babatunde Oluwaseun Ajayi
Babatunde Oluwaseun Ajayi has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Issara Sereewatthanawut
Affiliations King Prajadhipok’s Institute, Bangkok, Thailand, Bangkokthonburi University, Bangkok, Thailand
7 shared publications Mayowa Emmanuel Bamisaye
4 shared publications- Mayowa Emmanuel Bamisaye
King Prajadhipok’s Institute, Bangkok 10210, Thailand
3 shared publications Thanwadee Chinda
3 shared publications- Thanwadee Chinda
School of Management Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathumthani 12000, Thailand
3 shared publications - Ademola Enitan Ilesanmi
University of Pennsylvania, Philadelphia, USA
2 shared publications
Latest Publications
- Open Access
Prioritizing Parameters of EDGE Certification for Public Office Building Renovation in Bangkok, Thailand
The building industry accounts for one-third of global energy consumption and CO2eq emissions, yet research on green certification for public-building renovations remains limited in Southeast Asia. This study prioritizes parameters for achieving Excellence in Design for Greater Efficiencies (EDGE) certification in public buildings in Bangkok, Thailand, focusing on energy, water, and embodied carbon. Parameters were ranked by reduction potential, and a Bangkok case study was evaluated using available renovated parameter values. The study results present characteristics of public office buildings, local construction practices, available renovation data, and Bangkok’s climate conditions. Eight of 34 energy parameters, including natural ventilation, on-site renewable energy, and cooling system efficiency, contribute over 80% of potential energy reduction. Four of 15 water parameters, wastewater treatment and recycling, water-efficient landscape irrigation, rainwater harvesting, and water-closet flush efficiency, are critical, while autoclaved aerated concrete (AAC) for interior walls contributes most to embodied carbon reduction. The existing plan achieves reductions of 4.91% in energy, 7.04% in water, and 19.28% in embodied carbon, insufficient for certification. Optimizing four energy parameters raises energy reduction to 22.73%, adding wastewater treatment and recycling or upgrading landscape irrigation can raise water reduction above 20%, and increasing AAC use for interior walls to at least 53% achieves 20.2% embodied carbon reduction. Parameter prioritization may be used for renovation planning to meet EDGE reduction thresholds.
Open AccessPrioritizing Parameters of EDGE Certification for Public Office Building Renovation in Bangkok, Thailand
The building industry accounts for one-third of global energy consumption and CO2eq emissions, yet research on green certification for public-building renovations remains limited in Southeast Asia. This study prioritizes parameters for achieving Excellence in Design for Greater Efficiencies (EDGE) certification in public buildings in Bangkok, Thailand, focusing on energy, water, and embodied carbon. Parameters were ranked by reduction potential, and a Bangkok case study was evaluated using available renovated parameter values. The study results present characteristics of public office buildings, local construction practices, available renovation data, and Bangkok’s climate conditions. Eight of 34 energy parameters, including natural ventilation, on-site renewable energy, and cooling system efficiency, contribute over 80% of potential energy reduction. Four of 15 water parameters, wastewater treatment and recycling, water-efficient landscape irrigation, rainwater harvesting, and water-closet flush efficiency, are critical, while autoclaved aerated concrete (AAC) for interior walls contributes most to embodied carbon reduction. The existing plan achieves reductions of 4.91% in energy, 7.04% in water, and 19.28% in embodied carbon, insufficient for certification. Optimizing four energy parameters raises energy reduction to 22.73%, adding wastewater treatment and recycling or upgrading landscape irrigation can raise water reduction above 20%, and increasing AAC use for interior walls to at least 53% achieves 20.2% embodied carbon reduction. Parameter prioritization may be used for renovation planning to meet EDGE reduction thresholds.
- Open Access
- 15 April 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
The nexus between fatigue, schedule pressure, and their interconnected impacts on performance and sustainability
- 15 April 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessThe nexus between fatigue, schedule pressure, and their interconnected impacts on performance and sustainability
- Open Access
Custom Deep Learning Framework for Interpreting Diabetic Retinopathy in Healthcare Diagnostics
Diabetic retinopathy is a prevalent condition and a major public health concern due to its detrimental impact on eyesight. Diabetes is a root cause of its development and damages small blood vessels caused by prolonged high blood sugar levels. The degenerative consequences of diabetic retinopathy are irrevocable if not diagnosed in the early stages of its progression. This ailment triggers the development of retinal lesions, which can be identified for diagnosis and prognosis. However, lesion detection is challenging due to their similarity in intensity profiles to other retinal features, inconsistent sizes, and random locations. This research evaluates a custom deep learning network for classifying retinal images and compares it with the state-of-the-art classifiers. The novel preprocessing method is introduced to reduce the complexity of the diagnostic process and to enhance classification performance by adaptively enhancing images. Despite being a shallow network, the proposed model yields competitive results with an accuracy of 87.66% and an F1-score of 0.78. The evaluation metrics indicate that class imbalance affects the performance of the proposed model despite using the weighted cross-entropy loss. The future contribution will be the inclusion of generative adversarial networks for generating synthetic images to balance the dataset. This research aims to develop a robust computer-aided diagnostic system as a second interpreter for ophthalmologists during the diagnosis and prognosis stages.
Open AccessCustom Deep Learning Framework for Interpreting Diabetic Retinopathy in Healthcare Diagnostics
Diabetic retinopathy is a prevalent condition and a major public health concern due to its detrimental impact on eyesight. Diabetes is a root cause of its development and damages small blood vessels caused by prolonged high blood sugar levels. The degenerative consequences of diabetic retinopathy are irrevocable if not diagnosed in the early stages of its progression. This ailment triggers the development of retinal lesions, which can be identified for diagnosis and prognosis. However, lesion detection is challenging due to their similarity in intensity profiles to other retinal features, inconsistent sizes, and random locations. This research evaluates a custom deep learning network for classifying retinal images and compares it with the state-of-the-art classifiers. The novel preprocessing method is introduced to reduce the complexity of the diagnostic process and to enhance classification performance by adaptively enhancing images. Despite being a shallow network, the proposed model yields competitive results with an accuracy of 87.66% and an F1-score of 0.78. The evaluation metrics indicate that class imbalance affects the performance of the proposed model despite using the weighted cross-entropy loss. The future contribution will be the inclusion of generative adversarial networks for generating synthetic images to balance the dataset. This research aims to develop a robust computer-aided diagnostic system as a second interpreter for ophthalmologists during the diagnosis and prognosis stages.
- Open Access
- 20 January 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (1) , e0338633
Efficient AI-driven allegation screening: A case study of Thailand’s National Anti-Corruption Commission
Efficient screening of corruption allegations is crucial for promoting accountability and transparency in public administration. However, many institutions still rely on manual processes that are prone to inefficiency and inconsistency. As AI gains traction across sectors, this study develops and evaluates an artificial intelligence (AI)-powered prototype designed to support the preliminary screening of corruption complaints at Thailand’s National Anti-Corruption Commission (NACC). The proposed system integrates Optical Character Recognition (OCR), Natural Language Processing (NLP), and machine learning techniques to automate document handling and improve workflows. A mixed-methods research approach was adopted, combining institutional process analysis with a comprehensive technical performance assessment. The OCR module achieved an F1-score of 81.8%, with precision and recall of 84.2% and 79.6%, respectively. For printed text, the system attained 72% word-level accuracy and 78% at the character level. Additionally, the integrated framework demonstrated a classification accuracy of 57.5% and significantly improved operational efficiency, reducing average complaint processing time by 78.6% compared to traditional manual methods. The findings highlight AI’s transformative potential in enhancing anti-corruption efforts through increased speed, accuracy, and consistency. They underscore the importance of responsible and context-sensitive AI adoption in public sector governance. This study contributes to the growing discourse on digital governance by providing empirical evidence and practical insights for policymakers and practitioners aiming to implement scalable, transparent, and ethically grounded AI solutions within institutional accountability frameworks.
- 20 January 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (1) , e0338633
Open AccessEfficient AI-driven allegation screening: A case study of Thailand’s National Anti-Corruption Commission
Efficient screening of corruption allegations is crucial for promoting accountability and transparency in public administration. However, many institutions still rely on manual processes that are prone to inefficiency and inconsistency. As AI gains traction across sectors, this study develops and evaluates an artificial intelligence (AI)-powered prototype designed to support the preliminary screening of corruption complaints at Thailand’s National Anti-Corruption Commission (NACC). The proposed system integrates Optical Character Recognition (OCR), Natural Language Processing (NLP), and machine learning techniques to automate document handling and improve workflows. A mixed-methods research approach was adopted, combining institutional process analysis with a comprehensive technical performance assessment. The OCR module achieved an F1-score of 81.8%, with precision and recall of 84.2% and 79.6%, respectively. For printed text, the system attained 72% word-level accuracy and 78% at the character level. Additionally, the integrated framework demonstrated a classification accuracy of 57.5% and significantly improved operational efficiency, reducing average complaint processing time by 78.6% compared to traditional manual methods. The findings highlight AI’s transformative potential in enhancing anti-corruption efforts through increased speed, accuracy, and consistency. They underscore the importance of responsible and context-sensitive AI adoption in public sector governance. This study contributes to the growing discourse on digital governance by providing empirical evidence and practical insights for policymakers and practitioners aiming to implement scalable, transparent, and ethically grounded AI solutions within institutional accountability frameworks.
- Open Access
Sustainable Material Recovery from Demolition Waste: Knowledge Management and Insights from a Public Sector Building Renovation
The utilization of knowledge management (KM) assists construction companies in planning for waste management. This study applies KM in the material recovery of a public sector building renovation, focusing on aluminum composite panels (ACPs). The cost/benefit analysis (CBA) method examines suitable scenarios, where costs and benefits cover economic, environmental, and social perspectives. The cost/benefit (C/B) ratios reveal that the repurposing scenario, where ACP waste is repurposed as signboards, is the most suitable scenario, with a C/B of 0.96. The refurbishing scenario, in which ACP waste is refurbished as new facades, may be considered if the labor cost could be reduced through training. The repurposing scenario is further examined with a sensitivity analysis and the Leadership in Energy and Environmental Design certification, and it is found that implementing this scenario serves as a beginning step toward green certification and aligns with Thailand’s national strategies for green building promotion and the long-term Net Zero 2065 target. The study results serve as a guideline for Thailand’s transition toward a low-carbon and resource-efficient construction sector. Future studies are recommended to examine the complex relationships between costs and benefits and to track dynamic changes in the C/B ratio over time.
Open AccessSustainable Material Recovery from Demolition Waste: Knowledge Management and Insights from a Public Sector Building Renovation
The utilization of knowledge management (KM) assists construction companies in planning for waste management. This study applies KM in the material recovery of a public sector building renovation, focusing on aluminum composite panels (ACPs). The cost/benefit analysis (CBA) method examines suitable scenarios, where costs and benefits cover economic, environmental, and social perspectives. The cost/benefit (C/B) ratios reveal that the repurposing scenario, where ACP waste is repurposed as signboards, is the most suitable scenario, with a C/B of 0.96. The refurbishing scenario, in which ACP waste is refurbished as new facades, may be considered if the labor cost could be reduced through training. The repurposing scenario is further examined with a sensitivity analysis and the Leadership in Energy and Environmental Design certification, and it is found that implementing this scenario serves as a beginning step toward green certification and aligns with Thailand’s national strategies for green building promotion and the long-term Net Zero 2065 target. The study results serve as a guideline for Thailand’s transition toward a low-carbon and resource-efficient construction sector. Future studies are recommended to examine the complex relationships between costs and benefits and to track dynamic changes in the C/B ratio over time.
- Open Access
- 28 August 2025
- Published by Elsevier in Sustainable Futures
- Vol. 10
A hybrid mathematical model for evaluating recyclability pathways of cement-based materials in Thailand
- 28 August 2025
- Published by Elsevier in Sustainable Futures
- Vol. 10
Open AccessA hybrid mathematical model for evaluating recyclability pathways of cement-based materials in Thailand
- Open Access
- 25 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 27114
Integrating system dynamics and machine learning for environmental impact analysis of building materials in the demolition process
The construction sector's substantial contribution to climate change has raised significant environmental concerns, particularly regarding building demolitions-a major source of environmental degradation. As a critical phase within the construction lifecycle, the demolition process involves numerous interrelated variables, such as housing units, and demolition tools employed. Therefore, a comprehensive analysis of these factors is crucial for mitigating environmental impact. This study integrates System Dynamics (SD) modeling with the Random Forest (RF) algorithm to analyze the relationships among key variables and assess the overall environmental impacts of different demolition tool combinations (OEIC1, OEIC2, OEIC3, and OEIC4). The RF algorithm validates the SD model, while sensitivity analysis enhances robustness. The RF model shows strong predictive accuracy, with R-squared values of 0.9776 to 0.9990 and mean squared errors between 0.0003 and 0.0356. Among the combinations, OEIC4-comprising a demolition robot and hydraulic splitter-proves to be the most environmentally sustainable, producing impacts up to four times lower than the others. The analysis also finds that shorter demolition durations substantially reduce environmental impact. This integrated framework provides a novel method for assessing demolition-related environmental impacts. This approach contributes to circular economy principles, reduces pollution and waste, and aligns with global climate change mitigation goals.
- 25 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 27114
Open AccessIntegrating system dynamics and machine learning for environmental impact analysis of building materials in the demolition process
The construction sector's substantial contribution to climate change has raised significant environmental concerns, particularly regarding building demolitions-a major source of environmental degradation. As a critical phase within the construction lifecycle, the demolition process involves numerous interrelated variables, such as housing units, and demolition tools employed. Therefore, a comprehensive analysis of these factors is crucial for mitigating environmental impact. This study integrates System Dynamics (SD) modeling with the Random Forest (RF) algorithm to analyze the relationships among key variables and assess the overall environmental impacts of different demolition tool combinations (OEIC1, OEIC2, OEIC3, and OEIC4). The RF algorithm validates the SD model, while sensitivity analysis enhances robustness. The RF model shows strong predictive accuracy, with R-squared values of 0.9776 to 0.9990 and mean squared errors between 0.0003 and 0.0356. Among the combinations, OEIC4-comprising a demolition robot and hydraulic splitter-proves to be the most environmentally sustainable, producing impacts up to four times lower than the others. The analysis also finds that shorter demolition durations substantially reduce environmental impact. This integrated framework provides a novel method for assessing demolition-related environmental impacts. This approach contributes to circular economy principles, reduces pollution and waste, and aligns with global climate change mitigation goals.
- Open Access
- 15 July 2025
- Published by Elsevier in Resources, Conservation & Recycling Advances
- Vol. 27
Sustainable waste management of construction materials: Mathematical modelling and analysis
- 15 July 2025
- Published by Elsevier in Resources, Conservation & Recycling Advances
- Vol. 27
Open AccessSustainable waste management of construction materials: Mathematical modelling and analysis
- 23 January 2025
- Published by Springer Nature in Journal of Imaging Informatics in Medicine
- Vol. 38 (5) , 2915-2933
Unlocking the Power of 3D Convolutional Neural Networks for COVID-19 Detection: A Comprehensive Review
The advent of three-dimensional convolutional neural networks (3D CNNs) has revolutionized the detection and analysis of COVID-19 cases. As imaging technologies have advanced, 3D CNNs have emerged as a powerful tool for segmenting and classifying COVID-19 in medical images. These networks have demonstrated both high accuracy and rapid detection capabilities, making them crucial for effective COVID-19 diagnostics. This study offers a thorough review of various 3D CNN algorithms, evaluating their efficacy in segmenting and classifying COVID-19 across a range of medical imaging modalities. This review systematically examines recent advancements in 3D CNN methodologies. The process involved a comprehensive screening of abstracts and titles to ensure relevance, followed by a meticulous selection and analysis of research papers from academic repositories. The study evaluates these papers based on specific criteria and provides detailed insights into the network architectures and algorithms used for COVID-19 detection. The review reveals significant trends in the use of 3D CNNs for COVID-19 segmentation and classification. It highlights key findings, including the diverse range of networks employed for COVID-19 detection compared to other diseases, which predominantly utilize encoder/decoder frameworks. The study provides an in-depth analysis of these methods, discussing their strengths, limitations, and potential areas for future research. The study reviewed a total of 60 papers published across various repositories, including Springer and Elsevier. The insights from this study have implications for clinical diagnosis and treatment strategies. Despite some limitations, the accuracy and efficiency of 3D CNN algorithms underscore their potential for advancing medical image segmentation and classification. The findings suggest that 3D CNNs could significantly enhance the detection and management of COVID-19, contributing to improved healthcare outcomes.
- 23 January 2025
- Published by Springer Nature in Journal of Imaging Informatics in Medicine
- Vol. 38 (5) , 2915-2933
Unlocking the Power of 3D Convolutional Neural Networks for COVID-19 Detection: A Comprehensive Review
The advent of three-dimensional convolutional neural networks (3D CNNs) has revolutionized the detection and analysis of COVID-19 cases. As imaging technologies have advanced, 3D CNNs have emerged as a powerful tool for segmenting and classifying COVID-19 in medical images. These networks have demonstrated both high accuracy and rapid detection capabilities, making them crucial for effective COVID-19 diagnostics. This study offers a thorough review of various 3D CNN algorithms, evaluating their efficacy in segmenting and classifying COVID-19 across a range of medical imaging modalities. This review systematically examines recent advancements in 3D CNN methodologies. The process involved a comprehensive screening of abstracts and titles to ensure relevance, followed by a meticulous selection and analysis of research papers from academic repositories. The study evaluates these papers based on specific criteria and provides detailed insights into the network architectures and algorithms used for COVID-19 detection. The review reveals significant trends in the use of 3D CNNs for COVID-19 segmentation and classification. It highlights key findings, including the diverse range of networks employed for COVID-19 detection compared to other diseases, which predominantly utilize encoder/decoder frameworks. The study provides an in-depth analysis of these methods, discussing their strengths, limitations, and potential areas for future research. The study reviewed a total of 60 papers published across various repositories, including Springer and Elsevier. The insights from this study have implications for clinical diagnosis and treatment strategies. Despite some limitations, the accuracy and efficiency of 3D CNN algorithms underscore their potential for advancing medical image segmentation and classification. The findings suggest that 3D CNNs could significantly enhance the detection and management of COVID-19, contributing to improved healthcare outcomes.