DPDaniela Proprentner

Daniela Proprentner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniela Proprentner has a total of 115 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Battery Electrode Engineering Enables Fast Charging LMFP Cells Without Carbon‐Coated Foil

    by Rebecca Sellers, Daniela Proprentner, Amir Dahari, Steve Kench, Galo Paez‐Fajardo, Louis Piper, Gerard Bree

    Lithium manganese iron phosphate (LiMn x Fe 1‐x PO 4 , LMFP) has emerged as a promising Li‐ion battery cathode material due to its high voltage, thermal stability, and cycle life, yet its intrinsically low electronic and ionic conductivity limits high‐rate performance and thus usefulness in fast‐charge applications such as electric vehicles. Here, we evaluate key electrode design aspects, investigating the interplay between calendering density and current collector priming (carbon‐coating) on the fast cycling performance of LMFP cathodes. For electrodes on pristine aluminium, calendering to high density induced particle embedment into the foil (quantified via segmentation of cross‐sectional microscope images), reducing interfacial resistance while enhancing both rate capability and long‐term cycling stability. In contrast, performance of electrodes on C‐coated aluminium exhibited minimal sensitivity to densification. Surprisingly, at sufficiently high calendering pressure (achieving density ≥ 2.5 g cm −3 ), the carbon coating provided no advantage to high‐rate performance, in stark contrast with conventional understanding, and cells manufactured with pristine Al achieved fast charging from 10% to 80% SOC in just over 15 min, a key milestone for this chemistry. These findings establish a mechanistic understanding of how density and interfacial properties govern transport and electrochemical behavior in LMFP cells, providing practical guidance for optimized electrode structures.

  • Open Access

    Improving Cell Longevity of High Nickel Single Crystal NMC by Reducing the Contact Resistance

    by Eleni Fiamegkou, Daniela Proprentner, Harry Gillions, Rebecca Sellers, Satish Bolloju, Hamza Duale, Max Parker, Gaurav Pandey, Ashok S. Menon, Gerard Bree, et al.

    Surface oxygen loss driven degradation has restricted voltage operating windows and hindered the adoption of ever-increasing Ni-rich cathodes leading to cathode-engineering designs. Often overlooked in academic studies is the influence of electrode engineering through calendering on cell longevity. Here, we perform a systematic calendering study of industrially relevant single-crystal NMC811//graphite single-layer pouch cells cycled within conventional (3.0–4.2V) and O-loss degradation (2.5–4.4V) voltage windows to investigate cell performance and longevity without modifying the cathode chemistry. Single-crystal particles withstand aggressive calendering and are embedded within the aluminium current collector, substantially reducing interfacial contact resistance. Aggressive calendering suppresses contact-resistance growth during cycling, enabling prolonged utilisation of the additional high-voltage capacity and delaying the crossover between conventional and extended-voltage operation from approximately 40 to 300 cycles, without chemical modification. Furthermore, application of 1 MPa stack pressure further reduces contact resistance and suppresses its build-up during cycling, providing by 4-fold lifetime enhancement at 1C cycling rates.

  • Open Access

    The interplay between stack pressure, mechanical expansion and degradation pathways in lithium-ion batteries

    by Heng Wang, Rui Wang, Christopher A. O’KEefe, Erik Björklund, Daniela Proprentner, Joe C. Stallard, Hwee Jien Tan, Wesley M. Dose, Louis F. J. Piper, Robert S. Weatherup, et al.

    While electrochemical degradation mechanisms in lithium-ion batteries are well studied, the influence of mechanical factors remains poorly understood. Here we introduce a high-precision stack-pressure control and dilatometry tool to apply a uniform and constant stack pressure on electrodes independent of electrode swelling. By increasing stack pressure fourfold over typical initial values, we double the lifetime of graphite ‖ LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells, an industrially relevant battery chemistry, without altering active materials or electrolytes. This suggests that many lithium-ion batteries operate under sub-optimal stack-pressure conditions, leading to curtailed lifetimes. We demonstrate that different degradation mechanisms emerge outside the optimal pressure window: low stack pressure accelerates cathode cracking, whereas high pressure promotes lithium plating. Our findings highlight coupled mechanical–electrochemical degradation mechanisms and identify stack-pressure optimization as a practical solution for increasing cycling stability.


  • Open Access

    Artificial Intelligence Driven Optimisation of LMFP Microstructure for Enhanced Lithium-ion Battery Performance

    by Rebecca Sellers, Amir Dahari, Daniela Proprentner, Jingyi Zhao, James Gott, Isaac Squires, Sam Cooper, Steve Kench, Louis Piper, Gerard Bree

    Establishing optimised lithium-ion battery manufacturing processes is a multi-factored, application dependent, and typically resource-intensive challenge, involving the assembly and testing of large numbers of cells over a long period of time. This effectively slows the development and adoption of new technologies. In this work, we adopt and evaluate an accelerated artificial intelligence (AI) assisted method for optimisation of cell manufacturing processes, utilising an LiMn x Fe 1-x PO 4 (LMFP) cathode as a model system. Electrode microstructure (controlled via the calendaring process) was optimised for 4680 cylindrical cell performance via AI analysis of microscopy images and electrochemical data from only a relatively small number of manufactured coin cells, dramatically reducing needed development time and cost. Through this analysis, an optimised electrode density for high power performance (2.8 g cm -3 ) was identified and experimentally verified. The optimised density, balancing electronic and ionic transport, provided enhanced volumetric energy density under fast-charging conditions (1 C – 3 C, geared for electric vehicles). This study quantitatively outlines the role of LMFP electrode density on performance and highlights the growing relevance of AI-based approaches as an effective tool in advancing lithium-ion battery research and development.

  • Open Access

    Long-lifetime multilayer XNO®||NMC532 pouch cells: Scale up and characterisation

    by Jean E. Marshall, Alfred Madzvamuse, Akash A.W. Ratnayaka, Daniel Martin, Briséïs Mercadier, Katarina Lukic, Mahender Peddi, Loubna Hdidou, Daniela Proprentner, Ieuan Ellis, et al.

  • Open Access

    Battery Imaging Library: Multi-length scale and multi-modal synchrotron and laboratory battery imaging data for all

    by Ronan Docherty, Sam Riley, John D. Morley, Evangelos Papoutsellis, Antonia Diana Bobitan, Jack Donoghue, Katy Rankin, Fernando Alvarez Borges, Luis Salinas-Farran, Stefan Michalik, et al.

    Battery research increasingly relies on advanced imaging, yet open access to such data remains rare, scattered across various sources, and difficult to find. The Battery Imaging Library (BIL) is the first open, curated collection of multi-modal and multi-length scale battery imaging datasets, accompanied by a searchable, FAIR-compliant website. Distinctive features include the release of raw experimental data (radiographs, sinograms, X-ray and electron diffraction patterns) together with rare operando and multi-resolution datasets. Each dataset is linked to Zenodo DOIs with metadata, ensuring persistence and citability; open-source Python scripts for preprocessing and reconstruction are also provided for various CT modalities. BIL enables algorithm benchmarking, machine learning, and teaching using experimental and industrially relevant data. By combining coverage across modalities, length scales, and chemistries with raw data accessibility and a FAIR-aligned web platform, the Battery Imaging Library provides a foundation for openness and reproducibility in battery imaging. The library is available here: https://www.batteryimaginglibrary.com

  • Open Access

    Practical, long-life and lean lithium metal batteries: the critical role of Li inventory

    by Syed Abdul Ahad, Rebecca Sellers, Jingyi Zhao, Daniela Proprentner, Hugh Geaney, Clare Grey, Gerard Bree, Louis Piper

    Practical lithium-metal batteries (LMBs) will require optimized liqiud electrolyte formulations and Li reservoir to both minimize and replenish Li inventory, ensuring long system lifetime.

  • Open Access

    Anode-free LiNiO 2 battery: a high energy density, low-cost cell design

    by Satish Bolloju, Gerard Bree, Jingyi Zhao, Beth I. J. Johnston, Calum Clenahan, Daniela Proprentner, Louis F. J. Piper

    An anode-free, cobalt-free LiNiO 2 battery enables 36% higher energy density than a graphite full cell. Protocol optimisation builds an in situ Li reservoir, retaining 80% capacity over 80 cycles under 1 MPa stack pressure.

  • Open Access

    High-power, long-lifetime multilayer pouch cells: scale up and characterization.

    by Jean Marshall, Alfred Madzvamuse, Akash Ratnayaka, Daniel Martin, Briséïs Mercadier, Katarina Lukic, Mahender Peddi, Loubna Hdidou, Daniela Proprentner, Ieuan Ellis, et al.

    While new battery chemistries are being developed at a rapid pace, scaling them up to commercial production remains a considerable challenge. Since reconfiguring a commercial-scale production line to make use of a new material is a significant undertaking, any new chemistry must be substantially proven, at a smaller scale, to deliver significant benefits compared to the previous standard. Our work demonstrates a scale-up process for a proprietary niobium-containing anode material, highlighting the challenges that needed to be met and overcome. Following initial small-scale (tens of g) electrode coatings and testing in coin cells, we optimised the formulation of the electrodes. The electrode mixing and coating process was then scaled up to a 10 L volume of electrode slurry, with the resulting electrode properties being carefully monitored. We subsequently designed and built over 200 pouch cells containing the niobium-based anode against the well-studied cathode material, NMC532. Subsequent testing, under 45°C accelerated aging conditions and at a rate of 2C, has shown that these pouch cells retain over 90 % of their initial discharge capacity over >2500 charge/discharge cycles.

  • Open Access

    Graphite Development From a Manufacturers Perspective: Processing, Formation, and Benchmarking

    by Elizabeth E. Oseland, Teena S. Rajan, Michael Lain, Daniela Proprentner, Harriet Dutton, Andrew Bostwick, Paul Siddy, David Wilson, Louis F.J. Piper

    Graphite remains the most widely used anode material in lithium-ion batteries, and the initial formation of the solid electrolyte interphase (SEI) largely dictates the long-term performance of commercial cells. Developing a new graphite anode to diversify the supply chain remains challenging due to proprietary formation protocols and inconsistent test formats. In this study, we evaluate a pitch-coated synthetic graphite developed by James Durrans & Sons against a commercial benchmark using a harmonized methodology across a coin, three-electrode PAT cell, and pilot line built single-layer pouch cells. By standardizing electrode morphology, formation procedures, and testing conditions, we isolate the influence of active material properties, e.g., how the first cycle loss is linked to SEI formation and how coatings and cycling conditions such as temperature can influence it. Under “like for like” comparative studies of NMC 811//graphite pouch cell, the modified synthetic graphite developed displayed higher rate performance and increased capacity retention at 1C over 200 cycles over established commercial counterparts.