Roni Sujarwadi
Research Subjects
Roni Sujarwadi has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Sonita Afrita Purba Siboro
Research Center for Polymer Technology, Research Organization for Nanotechnology and Materials, National Research and Innovation Agency (BRIN), Tangerang Selatan, Indonesia
2 shared publications - Ane Nurjanah
Research Center for Chemistry BRIN, KST BJ. Habibie, Building 452, South Tangerang, Banten 15314, Indonesia
1 shared publication - Armeida Dwi Ridhowati Madjid
Department of Chemistry, Faculty of Science and Technology, Universitas Islam Negeri Maulana Malik Ibrahim Malang, Indonesia
1 shared publication - Asep Nurohmat Majalis
Research Center for Chemistry BRIN, KST BJ. Habibie, Building 452, South Tangerang, Banten 15314, Indonesia
1 shared publication - Hendrawan Laksono
Research Center for Process Technology, National Research and Innovation Agency (BRIN), KST BJ Habibie Setu, South Tangerang, Banten, 15314, Indonesia, brin.go.id
1 shared publication - Heri Purwoto
Research Center for Process Technology, National Research and Innovation Agency (BRIN), KST BJ Habibie, South Tangerang, Banten, 15314. Indonesia
1 shared publication
Latest Publications
- Open Access
- 28 August 2025
- Published by Mongolian Journals Online in Mongolian Journal of Chemistry
- Vol. 26 (54) , 32-43
Enhanced cadmium (II) adsorption via calcium alginate encapsulation of HPMBP in heavy metal remediation
Heavy metal contamination from industrial activities poses serious environmental and health risks, particularly from cadmium (Cd), and the removal through adsorption using calcium alginate encapsulated with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) offers a promising solution. This study aims to improve Cd(II) ion adsorption by encapsulating HPMBP in calcium alginate beads and assess its effectiveness in contaminated water remediation. HPMBP was synthesized and encapsulated in calcium alginate beads to produce Ca-alginate-HPMBP microcapsules, characterized using FTIR), proton nuclear magnetic resonance (1H NMR), and Scanning Electron Microscopy (SEM) analysis. Adsorption experiments evaluated pH, contact time, initial Cd(II) concentration, and adsorbent mass effects. Desorption cycles were also tested to evaluate reusability, and environmental samples were examined to assess practical application. Optimal adsorption was achieved at pH 6, with Ca-alginate-HPMBP showing enhanced adsorption capacity (94.34 mg/g) compared to Ca-alginate alone (9.66 mg/g). Adsorption equilibrium was reached within five hours. Higher initial Cd(II) concentrations improved adsorption efficiency, following a Langmuir isotherm model. The material demonstrated high recovery rates in desorption cycles, and field tests with environmental samples showed a Cd(II) recovery rate of 101.89%. Encapsulation of HPMBP in calcium alginate enhances Cd(II) ion adsorption, providing an efficient, reusable adsorbent for heavy metal remediation in contaminated water sources, supporting sustainable solutions for water contamination challenges.
- 28 August 2025
- Published by Mongolian Journals Online in Mongolian Journal of Chemistry
- Vol. 26 (54) , 32-43
Open AccessEnhanced cadmium (II) adsorption via calcium alginate encapsulation of HPMBP in heavy metal remediation
Heavy metal contamination from industrial activities poses serious environmental and health risks, particularly from cadmium (Cd), and the removal through adsorption using calcium alginate encapsulated with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) offers a promising solution. This study aims to improve Cd(II) ion adsorption by encapsulating HPMBP in calcium alginate beads and assess its effectiveness in contaminated water remediation. HPMBP was synthesized and encapsulated in calcium alginate beads to produce Ca-alginate-HPMBP microcapsules, characterized using FTIR), proton nuclear magnetic resonance (1H NMR), and Scanning Electron Microscopy (SEM) analysis. Adsorption experiments evaluated pH, contact time, initial Cd(II) concentration, and adsorbent mass effects. Desorption cycles were also tested to evaluate reusability, and environmental samples were examined to assess practical application. Optimal adsorption was achieved at pH 6, with Ca-alginate-HPMBP showing enhanced adsorption capacity (94.34 mg/g) compared to Ca-alginate alone (9.66 mg/g). Adsorption equilibrium was reached within five hours. Higher initial Cd(II) concentrations improved adsorption efficiency, following a Langmuir isotherm model. The material demonstrated high recovery rates in desorption cycles, and field tests with environmental samples showed a Cd(II) recovery rate of 101.89%. Encapsulation of HPMBP in calcium alginate enhances Cd(II) ion adsorption, providing an efficient, reusable adsorbent for heavy metal remediation in contaminated water sources, supporting sustainable solutions for water contamination challenges.
- Open Access
- 9 July 2025
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 28 (6) , 307-315
Synthesis and Characterization of Nickel(II) Imprinted Polymers as a Selective Adsorbent for Nickel(II) Ions
The rapid expansion of nickel mining in Indonesia, driven by the growing demand for electric vehicle batteries, has raised concerns about the environmental and health impacts of nickel pollution. This study presents the synthesis and characterization of a highly selective adsorbent, Nickel(II) Imprinted Polymer (Ni(II)-IPs), for the monitoring and removal of Ni(II) ions. Ni(II)-IPs were synthesized using precipitation polymerization by imprinting the Ni(II)-8-hydroxyquinoline complex into a polymer matrix through the polymerization of methacrylic acid and ethylene glycol dimethacrylate. Successful imprinting and subsequent leaching of Ni(II) ions using HNO3 were confirmed by FTIR, SEM, and EDX characterization. Adsorption studies revealed that Ni(II)-IPs exhibit a high adsorption capacity of 70.26 mg/g at pH 7 within a short contact time of 15 minutes. Moreover, Ni(II)-IPs demonstrated excellent selectivity towards Ni(II) ions in the presence of competing ions, with relative selectivity coefficients of 1.20, 1.24, and 1.31 for Ni(II)/Cu(II), Ni(II)/Co(II), and Ni(II)/Pb(II), respectively. These findings highlight the potential of Ni(II)-IPs as an efficient and selective adsorbent for monitoring and removing Ni(II) ions from complex aqueous matrices, thereby addressing growing concerns about nickel pollution in Indonesia and beyond.
- 9 July 2025
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Jurnal Kimia Sains dan Aplikasi
- Vol. 28 (6) , 307-315
Open AccessSynthesis and Characterization of Nickel(II) Imprinted Polymers as a Selective Adsorbent for Nickel(II) Ions
The rapid expansion of nickel mining in Indonesia, driven by the growing demand for electric vehicle batteries, has raised concerns about the environmental and health impacts of nickel pollution. This study presents the synthesis and characterization of a highly selective adsorbent, Nickel(II) Imprinted Polymer (Ni(II)-IPs), for the monitoring and removal of Ni(II) ions. Ni(II)-IPs were synthesized using precipitation polymerization by imprinting the Ni(II)-8-hydroxyquinoline complex into a polymer matrix through the polymerization of methacrylic acid and ethylene glycol dimethacrylate. Successful imprinting and subsequent leaching of Ni(II) ions using HNO3 were confirmed by FTIR, SEM, and EDX characterization. Adsorption studies revealed that Ni(II)-IPs exhibit a high adsorption capacity of 70.26 mg/g at pH 7 within a short contact time of 15 minutes. Moreover, Ni(II)-IPs demonstrated excellent selectivity towards Ni(II) ions in the presence of competing ions, with relative selectivity coefficients of 1.20, 1.24, and 1.31 for Ni(II)/Cu(II), Ni(II)/Co(II), and Ni(II)/Pb(II), respectively. These findings highlight the potential of Ni(II)-IPs as an efficient and selective adsorbent for monitoring and removing Ni(II) ions from complex aqueous matrices, thereby addressing growing concerns about nickel pollution in Indonesia and beyond.
- Open Access
- 1 January 2025
- Published by Wiley in Scientifica
- Vol. 2025 (1)
Development of Carrageenan and Starch‐Based Bioplastics for Packaging Applications (Shopping Bags): Mechanical Characterization, Morphology, and Biodegradation
One approach to mitigating plastic pollution is the development of biodegradable plastic materials, such as bioplastics. Bioplastics are packaging materials that can be naturally degraded by microorganisms. In this study, bioplastics were produced using natural polymer compounds, specifically carrageenan and starch. The combination of starch and carrageenan was investigated to develop bioplastic packaging (shopping bags) with improved properties. This study aimed to evaluate the effect of incorporating different types of starch (corn, sago, and cassava) into carrageenan‐based bioplastics on their physicochemical and mechanical characteristics. The research involved the fabrication of bioplastics using a combination of carrageenan and various starches (corn, sago, and cassava), followed by characterization, including moisture content, thickness, tensile strength, elongation at break, functional group analysis using Fourier transform infrared (FTIR) spectroscopy, and surface morphology analysis using scanning electron microscopy–energy‐dispersive X‐ray spectroscopy (SEM–EDS). Additionally, water vapor transmission rate (WVTR), thermogravimetric analysis (TGA), and biodegradation tests were conducted following the ASTM G21 standard. The results indicated that starch variation did not significantly affect the mechanical properties, morphology, or biodegradation characteristics of the carrageenan–starch bioplastics.
- 1 January 2025
- Published by Wiley in Scientifica
- Vol. 2025 (1)
Open AccessDevelopment of Carrageenan and Starch‐Based Bioplastics for Packaging Applications (Shopping Bags): Mechanical Characterization, Morphology, and Biodegradation
One approach to mitigating plastic pollution is the development of biodegradable plastic materials, such as bioplastics. Bioplastics are packaging materials that can be naturally degraded by microorganisms. In this study, bioplastics were produced using natural polymer compounds, specifically carrageenan and starch. The combination of starch and carrageenan was investigated to develop bioplastic packaging (shopping bags) with improved properties. This study aimed to evaluate the effect of incorporating different types of starch (corn, sago, and cassava) into carrageenan‐based bioplastics on their physicochemical and mechanical characteristics. The research involved the fabrication of bioplastics using a combination of carrageenan and various starches (corn, sago, and cassava), followed by characterization, including moisture content, thickness, tensile strength, elongation at break, functional group analysis using Fourier transform infrared (FTIR) spectroscopy, and surface morphology analysis using scanning electron microscopy–energy‐dispersive X‐ray spectroscopy (SEM–EDS). Additionally, water vapor transmission rate (WVTR), thermogravimetric analysis (TGA), and biodegradation tests were conducted following the ASTM G21 standard. The results indicated that starch variation did not significantly affect the mechanical properties, morphology, or biodegradation characteristics of the carrageenan–starch bioplastics.