MBMoataz Badawi

Moataz Badawi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Moataz Badawi has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Properties of Recycled Concrete utilizing Waste Rubber

    by Moataz Badawi, Ayman G. Ahmed, Tarek A. Eldamaty, Medhat M. Helal

    Globally, billions of tires are being disposed of, representing a natural danger. Until now, a little part of that waste is reused, and most tires are simply accumulated. The present paper studies the durability phenomena of recycled concrete with partial substitution of fine aggregate by waste rubber tires. Silica fume, fly ash, and Cement Kiln Dust (CKD) were utilized as substitutions for the binding material. The overall substitution material reached about 30% of the cement content. The long-term behavior was surveyed by methods for water retention, chloride ions penetrability at 28 and 90 days, and protection from aggressive media (sulfate) at 1, 7, 14, and 28 days. Likewise, the compressive strength of concrete samples at 7, 14, 28, and 90 days was measured. The presence of cementitious framework, CKD, silica fume, and fly ash limit the utilization of waste rubber. Substitution percentages of up to 10% rubber fraction and 30% paste framework accomplish a satisfying strength level (35 MPa). These blends also exhibit higher protection from sulphuric corrosive assault than the reference blend.


  • Open Access

    The Effect of Polypropylene Fibers on the Fracture Characteristics of Lightweight Aggregate Crumb Rubber Concrete Composites

    by Moataz Badawi, Ayman G. Ahmed, Tarek A. Eldamaty, Medhat M. Helal

    The increasing use of rubber tires and their low recycling ratio have made them a serious environmental problem. This work aims to develop and investigate enhanced lightweight aggregate crumb rubber concrete (PFLWACRC) composites regarding the fracture properties of concrete. Polypropylene (PP) fibers are commonly familiar with increased crack growth endurance of concrete. On the other hand, the reuse of waste rubber in concrete plays a major role in the mitigation of the effects of climate change. Various concrete mixtures were designed with conventional Portland cement and common lightweight coarse aggregates. The variables considered in this study are PP fibers in different percentages (0.2%, 0.4%, and 0.6% volume fraction), and crumb rubber with various substitution proportions (0%, 5%, 10%, 15%, 20%, and 25% of fine aggregates). Cement with 450kg/m3 density with 10% silica fume was used. The fracture characteristics, which involve fracture toughness (KIC) and fracture energy generation (GF), of all concrete mixtures were evaluated by testing two types of samples, i.e. 54 notched concrete beams with dimensions of 10×10×52cm and 54 cylinders with diameter×height equal to 15×30cm. The results showed that the fracture toughness generation addresses the energy scattering limit of concrete mixtures. The findings showed that the existence of PP fibers increased the fracture energy and critical Crack Mouth Opening Displacement (CMOD)c. The PP fibers had a limited effect on the compressive strength and may even reduce it, but a remarkable enhancement of the energy absorption was observed.