Nurwahyuningsih Nurwahyuningsih
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Nurwahyuningsih Nurwahyuningsih has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Putu Tessa Fadhila
Program Studi Teknologi Industri Pertanian, Jurusan Teknologi Pertanian, Politeknik Negeri Jember, Indonesia
2 shared publicationsAde Galuh Rahmadevi
Teknologi Industri Pertanian, Jurusan Teknologi Pertanian, Politeknik Negeri Jember
1 shared publicationAde Galuh Rakhmadevi
Program Studi Teknologi Industri Pertanian, Jurusan Teknologi Pertanian, Politeknik Negeri Jember, Indonesia
1 shared publicationAdi Sucipto
Teknik Informatika, Jurusan Teknologi Informasi, Politeknik Negeri Jember
1 shared publicationAhmad Haris Hasanuddin Slamet
1 shared publication- Ayoub Fathi-Najafabadi
Dipartimento di Scienze Agrarie, Alimenti, Risorse Naturali e Ingegneria (DAFNE), Università Di Foggia, Foggia, Italy
1 shared publication
Latest Publications
- Open Access
- 27 October 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (11) , 1291
Optical and Chemical Profiling of Japanese Strawberries: Fluorescence Fingerprints, Imaging Features, and Quality Attributes Prediction
New strawberry cultivars with unusual peel colors, such as white and peach, require thorough characterization to understand their quality traits. In this study, we examined three Japanese cultivars, ‘Kotoka’ (red), ‘Awayuki’ (peach), and ‘Pearl White’ (white), to investigate their differences in chemistry and optical properties. We measured the sugar content, acidity, and maturity index, and combined these with fluorescence spectroscopy and imaging under three LED lights (365 nm, 420 nm, and white). The fluorescence data showed clear differences between cultivars, in which the ‘Pearl White’ gave a strong near-UV peak around 290/325 nm, ‘Awayuki’ had a high far-red signal in 490/745 nm, and ‘Kotoka’ showed lower fluorescence overall. Imaging backed up these findings, with ‘Pearl White’ and ‘Awayuki’ looking brighter under UV while Kotoka appeared darker and more uniform. Texture analysis showed ‘Pearl White’ had a more uneven surface, while ‘Kotoka’ was smoother. The basic chemistry also matched these trends, as ‘Kotoka’ had the most sugar and acid, giving it a sharper taste, while ‘Pearl White’ had the highest maturity index and a milder flavor. These results demonstrate how fluorescence fingerprints and imaging features, when combined, can rapidly characterize strawberry types and assess their quality without damaging the fruit.
- 27 October 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (11) , 1291
Open AccessOptical and Chemical Profiling of Japanese Strawberries: Fluorescence Fingerprints, Imaging Features, and Quality Attributes Prediction
New strawberry cultivars with unusual peel colors, such as white and peach, require thorough characterization to understand their quality traits. In this study, we examined three Japanese cultivars, ‘Kotoka’ (red), ‘Awayuki’ (peach), and ‘Pearl White’ (white), to investigate their differences in chemistry and optical properties. We measured the sugar content, acidity, and maturity index, and combined these with fluorescence spectroscopy and imaging under three LED lights (365 nm, 420 nm, and white). The fluorescence data showed clear differences between cultivars, in which the ‘Pearl White’ gave a strong near-UV peak around 290/325 nm, ‘Awayuki’ had a high far-red signal in 490/745 nm, and ‘Kotoka’ showed lower fluorescence overall. Imaging backed up these findings, with ‘Pearl White’ and ‘Awayuki’ looking brighter under UV while Kotoka appeared darker and more uniform. Texture analysis showed ‘Pearl White’ had a more uneven surface, while ‘Kotoka’ was smoother. The basic chemistry also matched these trends, as ‘Kotoka’ had the most sugar and acid, giving it a sharper taste, while ‘Pearl White’ had the highest maturity index and a milder flavor. These results demonstrate how fluorescence fingerprints and imaging features, when combined, can rapidly characterize strawberry types and assess their quality without damaging the fruit.
- Open Access
- 30 September 2023
- Published by Universitas Udayana in Jurnal BETA (Biosistem dan Teknik Pertanian)
- Vol. 11 (2) , 468-472
Analisis Efisiensi Flash Dryer Mesin Tipe Rak Pada Proses Pengeringan Daun Ungu (Graptophylum pictum Griff)
Abstrak Daun ungu (Graptophyllum pictum L griff) merupakan tanaman yang memiliki banyak manfaat. Masyarakat pada umumnya menggunakan tanaman daun ungu sebegai tanaman herbal. Bagian dari tanaman daun ungu yang sering digunakan adalah daunnya. Berbagai macam olahan produk daun ungu sudah dikembangkan, salah satunya sebagai minuman herbal daun ungu yang dapat diseduh seperti teh. Dalam pembuatan produk tersebut diperlukan proses pengeringan duan ungu, yaitu proses penurunan kadar air bahan basah hingga pada nilai kadar air tertentu. Penggunaan mesin pengering mampu mempercepat proses pengeringan, tidak tergantung pada cuaca, terjaminnya mutu, produk lebih higienis, hasil proses pengeringan lebih seragam, dan tidak membutuhkan tempat yang luas. Pada penelitian kali ini digunakan flash dryer tipe rak dengan berbahan bakar gas LPG dan menambahkan kipas untuk memperoleh efek konveksi paksa, dimana udara panas dialirkan oleh kipas secara merata di dalam ruang pengering. Tujuan dari penelitian ini yaitu mengetahui pengaruh sebaran suhu pada ruang pengering, menghitung efisiensi mesin pengering, dan mengetahui nilai kadar air akhir bahan dari proses pengeringan. Kesimpulan penelitian ini menunjukka bahwa mesin pengering flash dryer sangat efisien dalam proses pengeringan daun ungu nilai kadar air terendah terdapat pada rak 2 (bagian tengah) rata-rata sebesar 7.47% dengan besar energi yang digunakan sebesar 38,246.55 kJ. Serta efisiensi mesin pengering mencapai 90.62%. Persebaran suhu yang terjadi dalam ruang pengering selama 4 jam proses penngeringan cukup merata dan memiliki rata-rata suhu 50oC. Abstract Purple leaves (Graptophyllum pictum L griff) is a plant that has many benefits. People generally use purple leaves plants as herbal plants. The part of this plant that is often used is the leaves. Various kinds of processed purple leaf products have been developed, one of which is a purple leaf herbal drink that can be brewed like tea. In the manufacture of these products, a purple leaves drying process is required, namely the process of reducing the moisture content of the wet material to a certain moisture content value. The use of a dryer is able to speed up the drying process, not dependent to the weather, quality guarantee, more hygienic product, homogenic result, and it does not require a large area. In this study, a rack-type flash dryer was used with LPG fuel and added a fan to obtain a forced convection effect, in which hot air is circulated evenly by the fan in the drying chamber. The purpose of this study is to determine the effect of temperature distribution in the drying chamber, calculate the efficiency of the drying machine, and determine the final moisture content of the material from the drying process. The conclusion of this study shows that the flash dryer is very efficient in the process of drying purple leaves, the lowest water content is found on shelf 2 (middle part) with an average of 7.47% with a large amount of energy used of 38,246.55 kJ. And the efficiency of the dryer reaches 90.62%. The temperature distribution that occurs in the drying chamber for 4 hours of the drying process is quite even and has an average temperature of 50oC.
- 30 September 2023
- Published by Universitas Udayana in Jurnal BETA (Biosistem dan Teknik Pertanian)
- Vol. 11 (2) , 468-472
Open AccessAnalisis Efisiensi Flash Dryer Mesin Tipe Rak Pada Proses Pengeringan Daun Ungu (Graptophylum pictum Griff)
Abstrak Daun ungu (Graptophyllum pictum L griff) merupakan tanaman yang memiliki banyak manfaat. Masyarakat pada umumnya menggunakan tanaman daun ungu sebegai tanaman herbal. Bagian dari tanaman daun ungu yang sering digunakan adalah daunnya. Berbagai macam olahan produk daun ungu sudah dikembangkan, salah satunya sebagai minuman herbal daun ungu yang dapat diseduh seperti teh. Dalam pembuatan produk tersebut diperlukan proses pengeringan duan ungu, yaitu proses penurunan kadar air bahan basah hingga pada nilai kadar air tertentu. Penggunaan mesin pengering mampu mempercepat proses pengeringan, tidak tergantung pada cuaca, terjaminnya mutu, produk lebih higienis, hasil proses pengeringan lebih seragam, dan tidak membutuhkan tempat yang luas. Pada penelitian kali ini digunakan flash dryer tipe rak dengan berbahan bakar gas LPG dan menambahkan kipas untuk memperoleh efek konveksi paksa, dimana udara panas dialirkan oleh kipas secara merata di dalam ruang pengering. Tujuan dari penelitian ini yaitu mengetahui pengaruh sebaran suhu pada ruang pengering, menghitung efisiensi mesin pengering, dan mengetahui nilai kadar air akhir bahan dari proses pengeringan. Kesimpulan penelitian ini menunjukka bahwa mesin pengering flash dryer sangat efisien dalam proses pengeringan daun ungu nilai kadar air terendah terdapat pada rak 2 (bagian tengah) rata-rata sebesar 7.47% dengan besar energi yang digunakan sebesar 38,246.55 kJ. Serta efisiensi mesin pengering mencapai 90.62%. Persebaran suhu yang terjadi dalam ruang pengering selama 4 jam proses penngeringan cukup merata dan memiliki rata-rata suhu 50oC. Abstract Purple leaves (Graptophyllum pictum L griff) is a plant that has many benefits. People generally use purple leaves plants as herbal plants. The part of this plant that is often used is the leaves. Various kinds of processed purple leaf products have been developed, one of which is a purple leaf herbal drink that can be brewed like tea. In the manufacture of these products, a purple leaves drying process is required, namely the process of reducing the moisture content of the wet material to a certain moisture content value. The use of a dryer is able to speed up the drying process, not dependent to the weather, quality guarantee, more hygienic product, homogenic result, and it does not require a large area. In this study, a rack-type flash dryer was used with LPG fuel and added a fan to obtain a forced convection effect, in which hot air is circulated evenly by the fan in the drying chamber. The purpose of this study is to determine the effect of temperature distribution in the drying chamber, calculate the efficiency of the drying machine, and determine the final moisture content of the material from the drying process. The conclusion of this study shows that the flash dryer is very efficient in the process of drying purple leaves, the lowest water content is found on shelf 2 (middle part) with an average of 7.47% with a large amount of energy used of 38,246.55 kJ. And the efficiency of the dryer reaches 90.62%. The temperature distribution that occurs in the drying chamber for 4 hours of the drying process is quite even and has an average temperature of 50oC.
- Open Access
- 1 August 2023
- Published by Brawijaya University in Jurnal Keteknikan Pertanian Tropis dan Biosistem
- Vol. 11 (2) , 116-123
Analysis of Heat Transfer and Efficiency of Rack Type Flash Dryer Machine in Purple Sweet Potato Drying Process
Purple sweet potato (Ipomoea batatas var Ayumurasaki) has deep purple flesh and tuber skin. The variety of processed purple sweet potato products is increasingly diverse as purple sweet potato production increases, such as cookies and chips. Therefore, a process is needed to turn purple sweet potato into flour before being made into a variety of processed products, namely the drying process. Drying is a process of reducing the water content of a material to a certain level. To determine how much fuel is used by dryer machine, it is necessary to evaluate the effectiveness of the machine. So that in this study the aims were to determine the amount of energy needed to dry purple sweet potatoes, calculate the efficiency of the flash dryer machine and find out the temperature distribution on each tray of the drying machine. Based on the research results of the rack-type flash dryer drying machine, it can be concluded that the mechanism of the heat transfer rate in the purple sweet potato drying process occurs by forced convection heat transfer from the drying air to the purple sweet potatoes and a mass flow rate value of 0.1272 kg/s is obtained, the convection transfer rate in the drying chamber is 836.84 W and the sensible heat value is 1033.84 W. Hence, the amount of heat to dry 3 kg of purple sweet potato for 4 hours is 1870.68 W and an efficiency value of 55.26% is obtained. The total energy required to dry 3 kg of purple sweet potato in 4 hours is 5712.86 kJ.
- 1 August 2023
- Published by Brawijaya University in Jurnal Keteknikan Pertanian Tropis dan Biosistem
- Vol. 11 (2) , 116-123
Open AccessAnalysis of Heat Transfer and Efficiency of Rack Type Flash Dryer Machine in Purple Sweet Potato Drying Process
Purple sweet potato (Ipomoea batatas var Ayumurasaki) has deep purple flesh and tuber skin. The variety of processed purple sweet potato products is increasingly diverse as purple sweet potato production increases, such as cookies and chips. Therefore, a process is needed to turn purple sweet potato into flour before being made into a variety of processed products, namely the drying process. Drying is a process of reducing the water content of a material to a certain level. To determine how much fuel is used by dryer machine, it is necessary to evaluate the effectiveness of the machine. So that in this study the aims were to determine the amount of energy needed to dry purple sweet potatoes, calculate the efficiency of the flash dryer machine and find out the temperature distribution on each tray of the drying machine. Based on the research results of the rack-type flash dryer drying machine, it can be concluded that the mechanism of the heat transfer rate in the purple sweet potato drying process occurs by forced convection heat transfer from the drying air to the purple sweet potatoes and a mass flow rate value of 0.1272 kg/s is obtained, the convection transfer rate in the drying chamber is 836.84 W and the sensible heat value is 1033.84 W. Hence, the amount of heat to dry 3 kg of purple sweet potato for 4 hours is 1870.68 W and an efficiency value of 55.26% is obtained. The total energy required to dry 3 kg of purple sweet potato in 4 hours is 5712.86 kJ.