Woo Jin Mun
Research Subjects
Woo Jin Mun has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Jong Hak Kim
Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
7 shared publications Bomi Kim
6 shared publicationsChang Soo Lee
3 shared publications- Hyug Hee Han2 shared publications
- Hyuk Jin Roh2 shared publications
Jin Hyuk Kim
2 shared publications
Latest Publications
- 13 November 2026
- Published by Elsevier in European Polymer Journal
- Vol. 262
Composition-dependent CO2 transport in poly(POEM-co-TBAEMA) membranes: Experimental and molecular insights into non-monotonic behavior
- 13 November 2026
- Published by Elsevier in European Polymer Journal
- Vol. 262
Composition-dependent CO2 transport in poly(POEM-co-TBAEMA) membranes: Experimental and molecular insights into non-monotonic behavior
- Open Access
- 19 August 2026
- Published by Elsevier in SSRN Electronic Journal
Composition-Dependent CO2 Transport in Poly(POEM-co-TBAEMA) Membranes: Experimental and Molecular Insights into Non-Monotonic Behavior
Balancing CO2 affinity and polymer-chain packing is critical for achieving high-performance CO2-selective polymer membranes. Herein, we developed all-polymeric thin-film composite (TFC) membranes based on poly(poly(oxyethylene methacrylate)-co-2-(tert-butylamino)ethyl methacrylate) (PPT) copolymers, in which CO2-philic POEM and amine-containing TBAEMA units were combined to regulate gas affinity and polymer packing. Varying the copolymer composition resulted in non-monotonic CO2 transport behavior, with the intermediate composition PPT82 exhibiting the optimal separation performance. The PPT82 membrane achieved a CO2 permeance of 1131 GPU with CO2/N2 and CO2/CH4 selectivities of 39.2 and 15.1, respectively, simultaneously enhancing CO2 permeance and selectivity compared with the PPOEM homopolymer. Experimental CO2 sorption and solution-diffusion analyses revealed that this enhancement originated from concurrent improvements in CO2 solubility and diffusivity at the optimized composition. Molecular dynamics simulations further revealed that TBAEMA incorporation disrupts efficient packing of the POEM chains, increases fractional free volume, and strengthens polymer–CO2 interactions, whereas excessive TBAEMA incorporation promotes stronger interchain association, partially offsetting these beneficial effects. PPT82 therefore provides a favorable balance among CO2 affinity, free-volume accessibility, and interchain interactions. These findings demonstrate that optimizing copolymer composition, rather than simply maximizing CO2-philic functionality, provides an effective strategy for simultaneously controlling sorption and diffusion, thereby establishing a molecular-level composition–structure–transport relationship for the design of high-performance CO2 separation membranes.
- 19 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessComposition-Dependent CO2 Transport in Poly(POEM-co-TBAEMA) Membranes: Experimental and Molecular Insights into Non-Monotonic Behavior
Balancing CO2 affinity and polymer-chain packing is critical for achieving high-performance CO2-selective polymer membranes. Herein, we developed all-polymeric thin-film composite (TFC) membranes based on poly(poly(oxyethylene methacrylate)-co-2-(tert-butylamino)ethyl methacrylate) (PPT) copolymers, in which CO2-philic POEM and amine-containing TBAEMA units were combined to regulate gas affinity and polymer packing. Varying the copolymer composition resulted in non-monotonic CO2 transport behavior, with the intermediate composition PPT82 exhibiting the optimal separation performance. The PPT82 membrane achieved a CO2 permeance of 1131 GPU with CO2/N2 and CO2/CH4 selectivities of 39.2 and 15.1, respectively, simultaneously enhancing CO2 permeance and selectivity compared with the PPOEM homopolymer. Experimental CO2 sorption and solution-diffusion analyses revealed that this enhancement originated from concurrent improvements in CO2 solubility and diffusivity at the optimized composition. Molecular dynamics simulations further revealed that TBAEMA incorporation disrupts efficient packing of the POEM chains, increases fractional free volume, and strengthens polymer–CO2 interactions, whereas excessive TBAEMA incorporation promotes stronger interchain association, partially offsetting these beneficial effects. PPT82 therefore provides a favorable balance among CO2 affinity, free-volume accessibility, and interchain interactions. These findings demonstrate that optimizing copolymer composition, rather than simply maximizing CO2-philic functionality, provides an effective strategy for simultaneously controlling sorption and diffusion, thereby establishing a molecular-level composition–structure–transport relationship for the design of high-performance CO2 separation membranes.
- Open Access
- 25 May 2026
- Published by Elsevier in SSRN Electronic Journal
Thin-Film Composite Mixed-Matrix Membranes Incorporating Hydrogen-Bonded Organic Frameworks and a CO2-Affinitive Amphiphilic PTP Highly Branched Copolymer
Mixed-matrix membranes (MMMs) incorporating porous fillers have shown great promise for enhancing gas separation performance; however, issues such as filler aggregation and poor polymer-filler interfacial compatibility continue to hinder the development of thin-film composite (TFC) architectures. In this work, we demonstrate all-organic TFC MMMs utilizing a hydrogen-bonded organic framework (HOF) filler, melamine cyanurate (MCA), dispersed within a CO2-affinitive amphiphilic highly branched copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-poly(ethylene glycol) 2,4,6-tris(1-phenylethyl)phenyl ether methacrylate) (PTP). The PTP matrix, synthesized via free-radical polymerization, provides high chain mobility and strong interfacial affinity toward MCA through hydrogen bonding, enabling favorable polymer-filler interfacial compatibility and robust structural integrity. Incorporation of 10 wt% MCA improved separation performance, yielding a CO2 permeance of 851 GPU and a CO2/N2 selectivity of 40, representing ~25% and ~21% enhancements relative to the neat PTP. These gains are primarily attributed to the marked increase in CO2 solubility afforded by the CO2-affinitive HOF filler, which offsets the reduced gas diffusivity, as supported by molecular dynamics (MD) simulations. Further optimization of selective-layer thickness increased CO2 permeance to 2035 GPU while maintaining a selectivity of 26, demonstrating strong potential for post-combustion CO2 capture. This study demonstrates the potential of HOF-based all-organic TFC MMMs for developing high-performance CO2 separation membranes with ultrahigh permeance and practically relevant selectivity.
- 25 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThin-Film Composite Mixed-Matrix Membranes Incorporating Hydrogen-Bonded Organic Frameworks and a CO2-Affinitive Amphiphilic PTP Highly Branched Copolymer
Mixed-matrix membranes (MMMs) incorporating porous fillers have shown great promise for enhancing gas separation performance; however, issues such as filler aggregation and poor polymer-filler interfacial compatibility continue to hinder the development of thin-film composite (TFC) architectures. In this work, we demonstrate all-organic TFC MMMs utilizing a hydrogen-bonded organic framework (HOF) filler, melamine cyanurate (MCA), dispersed within a CO2-affinitive amphiphilic highly branched copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-poly(ethylene glycol) 2,4,6-tris(1-phenylethyl)phenyl ether methacrylate) (PTP). The PTP matrix, synthesized via free-radical polymerization, provides high chain mobility and strong interfacial affinity toward MCA through hydrogen bonding, enabling favorable polymer-filler interfacial compatibility and robust structural integrity. Incorporation of 10 wt% MCA improved separation performance, yielding a CO2 permeance of 851 GPU and a CO2/N2 selectivity of 40, representing ~25% and ~21% enhancements relative to the neat PTP. These gains are primarily attributed to the marked increase in CO2 solubility afforded by the CO2-affinitive HOF filler, which offsets the reduced gas diffusivity, as supported by molecular dynamics (MD) simulations. Further optimization of selective-layer thickness increased CO2 permeance to 2035 GPU while maintaining a selectivity of 26, demonstrating strong potential for post-combustion CO2 capture. This study demonstrates the potential of HOF-based all-organic TFC MMMs for developing high-performance CO2 separation membranes with ultrahigh permeance and practically relevant selectivity.
- Open Access
- 17 April 2026
- Published by Elsevier in SSRN Electronic Journal
Rationally Designed Mechanically Robust and Highly Adhesive Elastomeric Electrolytes for Flexible Solid-State Supercapacitors
Flexible electrolytes enabling efficient ion transport are increasingly essential for the rapid advancement of flexible energy storage devices. In this study, we report a mechanically robust and highly conductive elastomeric electrolyte based on a poly(acrylic acid-co-poly(oxyethylene) methacrylate) (P(AA-co-POEM)) network crosslinked with N,N′-methylenebisacrylamide (MBAA). The polymer electrolytes incorporating an ionic liquid were fabricated without solvent via a one-pot thermal polymerization process, resulting in a stable, amorphous, and homogeneous solid-state structure. The synergistic integration of poly(acrylic acid) (PAA) and poly(oxyethylene) methacrylate (POEM) units enables a dual-functional polymer matrix: PAA segments impart mechanical reinforcement and strong interfacial adhesion through extensive hydrogen-bonding interactions, while POEM chains facilitate efficient ion dissociation and transport by providing flexible ether-rich pathways. Among the investigated compositions, the AP91-EE4 electrolyte exhibited an optimal balance between mechanical robustness and ionic conductivity, achieving a high ionic conductivity of mS cm−1 and a tensile stress of 72 kPa while maintaining high flexibility. A symmetric solid-state supercapacitor assembled with the AP91-EE4 electrolyte demonstrated ideal capacitive behavior, good electrochemical performance, and stable long-term operational stability. The enhanced device performance is attributed to the synergistic combination of efficient ion transport pathways and strong interfacial adhesion at the electrolyte-electrode interface. These findings highlight that the rational design of elastomeric polymer electrolytes provides a promising platform for next-generation flexible and wearable electrochemical energy storage systems.
- 17 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRationally Designed Mechanically Robust and Highly Adhesive Elastomeric Electrolytes for Flexible Solid-State Supercapacitors
Flexible electrolytes enabling efficient ion transport are increasingly essential for the rapid advancement of flexible energy storage devices. In this study, we report a mechanically robust and highly conductive elastomeric electrolyte based on a poly(acrylic acid-co-poly(oxyethylene) methacrylate) (P(AA-co-POEM)) network crosslinked with N,N′-methylenebisacrylamide (MBAA). The polymer electrolytes incorporating an ionic liquid were fabricated without solvent via a one-pot thermal polymerization process, resulting in a stable, amorphous, and homogeneous solid-state structure. The synergistic integration of poly(acrylic acid) (PAA) and poly(oxyethylene) methacrylate (POEM) units enables a dual-functional polymer matrix: PAA segments impart mechanical reinforcement and strong interfacial adhesion through extensive hydrogen-bonding interactions, while POEM chains facilitate efficient ion dissociation and transport by providing flexible ether-rich pathways. Among the investigated compositions, the AP91-EE4 electrolyte exhibited an optimal balance between mechanical robustness and ionic conductivity, achieving a high ionic conductivity of mS cm−1 and a tensile stress of 72 kPa while maintaining high flexibility. A symmetric solid-state supercapacitor assembled with the AP91-EE4 electrolyte demonstrated ideal capacitive behavior, good electrochemical performance, and stable long-term operational stability. The enhanced device performance is attributed to the synergistic combination of efficient ion transport pathways and strong interfacial adhesion at the electrolyte-electrode interface. These findings highlight that the rational design of elastomeric polymer electrolytes provides a promising platform for next-generation flexible and wearable electrochemical energy storage systems.
- 3 September 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 541
Dew-laced web-like heterostructure of nitrogen-doped carbon nanofibers with HOF@MOF hybrids for supercapacitors
- 3 September 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 541
Dew-laced web-like heterostructure of nitrogen-doped carbon nanofibers with HOF@MOF hybrids for supercapacitors