HYHeng Ye

Heng Ye

*This is an algorithmically generated author record based on publicly available information.

Heng Ye has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Statistical Investigation of Al$_{2}$O$_{3}$ Insertion Layer on the Endurance of Hf$_{0.5}$Zr$_{0.5}$O$_{2}$ Films: Abrupt Endurance Degradation and Mechanism

    by Heng Ye, Xiaomin Lai, Xinzhong Zhu, Jing Liu, Xiaoshan Pan, Yuanlu Xie, Lanlong Ji, Kai Xi, Tiancheng Gong, Yuan Qiu

    In this work, the effect of ultrathin Al2O3 insertion layer on the endurance characteristics of Hf0.5Zr0.5O2 (HZO) layer is statistically investigated. It was found that the ultrathin Al2O3 insertion layer will not improve or reduce the endurance of HZO devices within the low operation voltage range. However, an abrupt endurance degradation phenomenon is observed when increasing the operation voltage to a specific value and the endurance of Hf0.5Zr0.5O2 layer is sharply lower than HZO device. This phenomenon is finally explained by the leakage-current-assist polarization switching mechanism after quantitatively extracting the continuous charge density during the polarization switching by pulse measurement. The findings of this work provide a deep understanding of the endurance failure mechanism of Ferroelectric/Dielectric (FE/DE) devices and are helpful for the reliability investigation of the gate stack in Fe-FET.

  • A Back-End-of-Line-Compatible Ferroelectric Ga-Doped HfO₂ Capacitor With Low Thermal Budget (400°C)

    by Peng Yuan, Xufang Zhang, Peng Peng, Xinzhong Zhu, Heng Ye, Xiaomin Lai, Yuan Qiu, Pengfei Jiang, Qing Luo, Jing Zhang

    Gallium-doped hafnium oxide (HGO) exhibits excellent ferroelectricity with remarkable reliability and improved endurance characteristics. However, the requisite high-temperature annealing (>600 ∘C) poses challenges for CMOS back-end-of-line (BEOL) integration. To achieve ferroelectric (FE) HGO at low temperatures (below 400 ∘C), we carried out an in-depth analysis on the role of N2 flow during rapid thermal annealing (RTA) on ferroelectricity at 400 ∘C. Low-N2-flow-rate annealing under reduced pressure lowers the energy barrier for stabilizing the FE orthorhombic phase (o-phase) in HGO, though at the expense of cooling efficiency. Strategic flow parameter optimization enables FE for the HGO capacitor under BEOL-compatible annealing conditions. In addition, the FE behavior of HGO films with different Ga doping concentrations was investigated. The identified Ga doping window (4.17–9.09 atomic%) redefines the phase stability criteria for 10 nm HGO FEs. The remnant polarization (2Pr) of 24.8 μC/cm2 was achieved for HGO samples with 6.14 atomic% Ga processed at 400 ∘C. Furthermore, due to the decrease in process temperature, the devices exhibit robust performance, including low leakage current and high endurance (>109). This work establishes a BEOL-compatible hafnium-based FE material system through low-temperature process engineering.


  • Enhancement of Energy Storage and Efficiency in Antiferroelectric Hf᙮Zr᙮₋₁O₂ Supercapacitors Through Tailored Phase Engineering by Oxygen Vacancy

    by Zhiquan He, Yu Bai, Guanlin Li, Xuanxi Liu, Xiuyi Wang, Chuhao Yao, Pengfei Jiang, Tiancheng Gong, Wei Wei, Xiao Long, et al.

    In this letter, the antiferroelectric (AFE) performance of ${\mathrm {Hf}}_{\mathbf {x}}$ ${\mathrm {Zr}}_{\mathbf {{1}-}\mathbf {x}}$ ${\mathrm {O}}_{\mathbf {{2}}}$ (HZO) film is significantly improved by regulating its oxygen vacancy (V ${}_{\!\!\mathbf {O}}$ ). The gas with different ${\mathrm {O}}_{\mathbf {{2}}}$ flow is used in the HZO films sputter process. Introducing appropriate ${\mathrm {O}}_{\mathbf {{2}}}$ flow enhances both energy storage density (ESD) and efficiency ( $\eta $ ) of the AFE HZO energy storage capacitors (ESCs). X-ray diffraction (XRD) and capacitance–electric (C–E) measurements demonstrate that the t-phase/o-phase ratio in HZO films was adjusted by regulating the V ${}_{\!\!\mathbf {O}}$ concentration to promote t-phase crystallization. The optimal crystallization of the t-phase in HZO films, achieved with 8.0% V ${}_{\!\!\mathbf {O}}$ and 0.82 Zr concentration, results in an ESD of ~86.3 J/cm3 and an efficiency of ~74%. Moreover, we attained exceptional durability, surpassing $10^{{9}}$ cycles while maintaining 98% of the initial ESD. The results obtained herein provide a novel and effective method to achieve high-performance AFE HZO ESCs.