Kai Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kai Liu has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Zhao Li
GNSS Research Center, Hubei Luojia Laboratory, Wuhan University, Wuhan, China
6 shared publications - Qusen Chen
Wuhan University
4 shared publications - Weiping Jiang
School of Geodesy and Geomatics Wuhan University Wuhan China
4 shared publications - Xin Chang
School of Geodesy and Geomatics Wuhan University Wuhan China
4 shared publications - Hua Chen
School of Geodesy and Geomatics Wuhan University Wuhan China
2 shared publications - Jian Wang
Wuhan University
2 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by KEAI Publishing in Geodesy and Geodynamics
Mechanism-dependent scaling of GNSS peak ground displacement for rapid earthquake magnitude estimation
- 1 September 2026
- Published by KEAI Publishing in Geodesy and Geodynamics
Open AccessMechanism-dependent scaling of GNSS peak ground displacement for rapid earthquake magnitude estimation
- Open Access
- 15 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Formulation of testing gravitational redshift based on Laser Time link between China Space Station and a ground station
This paper presents a high-precision gravitational redshift test using the China Space Station (CSS) Laser Time Transfer (CLT) system. We develop a comprehensive observation equation based on a $$c^{-3}$$ order relativistic model for space-ground clock comparison. While the CSS optical clock system is currently in the orbital debugging phase, our simulation using actual CSS orbit data achieves a gravitational redshift verification precision of $$\mathrm {(1.8\pm 47)}\times {10}^{-7}$$ – approximately one order of magnitude improvement better than previous experiments. Our work represents the first application of laser-based time transfer for gravitational redshift verification at such precision, and the first use of the CSS CLT link for testing this fundamental aspect of General Relativity. Unlike microwave-based methods, our laser approach avoids ionospheric effects and first-order Doppler shifts. Residual analysis identifies tropospheric delay variations and atmospheric turbulence as the primary remaining uncertainty contributors. The achieved precision enables gravitational potential difference measurements with 0.1 m $$^{\textrm{2}}$$ /s $$^{\textrm{2}}$$ precision – offering new capabilities for both fundamental physics investigations and geodetic applications including intercontinental height transfer. This work establishes a new benchmark for high-precision tests of relativistic physics and demonstrates the transformative potential of space-based optical time transfer.- 15 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Open AccessFormulation of testing gravitational redshift based on Laser Time link between China Space Station and a ground station
This paper presents a high-precision gravitational redshift test using the China Space Station (CSS) Laser Time Transfer (CLT) system. We develop a comprehensive observation equation based on a $$c^{-3}$$ order relativistic model for space-ground clock comparison. While the CSS optical clock system is currently in the orbital debugging phase, our simulation using actual CSS orbit data achieves a gravitational redshift verification precision of $$\mathrm {(1.8\pm 47)}\times {10}^{-7}$$ – approximately one order of magnitude improvement better than previous experiments. Our work represents the first application of laser-based time transfer for gravitational redshift verification at such precision, and the first use of the CSS CLT link for testing this fundamental aspect of General Relativity. Unlike microwave-based methods, our laser approach avoids ionospheric effects and first-order Doppler shifts. Residual analysis identifies tropospheric delay variations and atmospheric turbulence as the primary remaining uncertainty contributors. The achieved precision enables gravitational potential difference measurements with 0.1 m $$^{\textrm{2}}$$ /s $$^{\textrm{2}}$$ precision – offering new capabilities for both fundamental physics investigations and geodetic applications including intercontinental height transfer. This work establishes a new benchmark for high-precision tests of relativistic physics and demonstrates the transformative potential of space-based optical time transfer. - 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (13) , 29898-29912
STPNet: A Dual-Channel Spatiotemporal Network for Reweighting-Based Smartphone Positioning in Complex Urban Environments
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (13) , 29898-29912
STPNet: A Dual-Channel Spatiotemporal Network for Reweighting-Based Smartphone Positioning in Complex Urban Environments
- 26 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (26) , 266305
Geometry-adaptive NLOS mitigation for urban GNSS positioning via sliding-window factor graph optimization
With the growing demand for urban positioning and navigation, Global Navigation Satellite System services are increasingly essential in smart-city applications. However, signal occlusion caused by dense buildings often leads to non-line-of-sight (NLOS) reception; existing methods typically adopt fixed exclusion or reweighting strategies to handle NLOS signals, which can either weaken satellite geometry or allow residual NLOS errors to propagate into the solution. To address this issue, we propose a geometry-adaptive (GA) sliding-window factor-graph optimization framework which performs GA NLOS handling and jointly optimizes pseudorange and time-differenced carrier-phase factors in a sliding-window factor graph. A vehicle field experiment was conducted to validate the effectiveness of the proposed method. Results indicate that the proposed method achieves positioning RMSEs of 1.83 m and 2.32 m in the horizontal and vertical directions, corresponding to reductions of 61.8% and 59.2%, respectively, compared with conventional methods. Particularly, in the deep urban scenario, the proposed method improves the 3D positioning accuracy by up to 72.1%.
- 26 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (26) , 266305
Geometry-adaptive NLOS mitigation for urban GNSS positioning via sliding-window factor graph optimization
With the growing demand for urban positioning and navigation, Global Navigation Satellite System services are increasingly essential in smart-city applications. However, signal occlusion caused by dense buildings often leads to non-line-of-sight (NLOS) reception; existing methods typically adopt fixed exclusion or reweighting strategies to handle NLOS signals, which can either weaken satellite geometry or allow residual NLOS errors to propagate into the solution. To address this issue, we propose a geometry-adaptive (GA) sliding-window factor-graph optimization framework which performs GA NLOS handling and jointly optimizes pseudorange and time-differenced carrier-phase factors in a sliding-window factor graph. A vehicle field experiment was conducted to validate the effectiveness of the proposed method. Results indicate that the proposed method achieves positioning RMSEs of 1.83 m and 2.32 m in the horizontal and vertical directions, corresponding to reductions of 61.8% and 59.2%, respectively, compared with conventional methods. Particularly, in the deep urban scenario, the proposed method improves the 3D positioning accuracy by up to 72.1%.
- Open Access
- 26 May 2026
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 150
Joint monument–subsurface thermoelastic modelling of temperature-induced displacement at global GNSS reference stations
- 26 May 2026
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 150
Open AccessJoint monument–subsurface thermoelastic modelling of temperature-induced displacement at global GNSS reference stations
- Open Access
- 6 March 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (5)
Monitoring of the Transient Sea Level Variations Associated With Hurricane‐Induced Storm Surges by GNSS‐IR
As global climate change intensifies, hurricane‐induced storm surges are becoming more frequent and severe. While Global Navigation Satellite System‐Interferometric Reflectometry (GNSS‐IR) is widely used to monitor sea level variations, its capability to detect rapid and extreme events remains limited. We propose a short‐time feature extraction GNSS‐IR strategy constrained by astronomical tidal models. By analyzing the continuity and stability of spectral reflections, the method identifies coherent signals from transient sea level changes and effectively addresses the typical 10–20 min temporal bias introduced by the static‐surface assumption. Validation results show that the method achieves a long‐term monitoring accuracy of 4.6 cm over 1 year, and maintains a stable accuracy of approximately 10 cm during storm surges. It also achieves 4.0 cm accuracy over 12‐hr period and enables short‐term sea level prediction with an accuracy of 7 cm. These findings highlight the potential of near‐shore GNSS‐IR to strengthen tide gauge networks and marine assessments.
- 6 March 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (5)
Open AccessMonitoring of the Transient Sea Level Variations Associated With Hurricane‐Induced Storm Surges by GNSS‐IR
As global climate change intensifies, hurricane‐induced storm surges are becoming more frequent and severe. While Global Navigation Satellite System‐Interferometric Reflectometry (GNSS‐IR) is widely used to monitor sea level variations, its capability to detect rapid and extreme events remains limited. We propose a short‐time feature extraction GNSS‐IR strategy constrained by astronomical tidal models. By analyzing the continuity and stability of spectral reflections, the method identifies coherent signals from transient sea level changes and effectively addresses the typical 10–20 min temporal bias introduced by the static‐surface assumption. Validation results show that the method achieves a long‐term monitoring accuracy of 4.6 cm over 1 year, and maintains a stable accuracy of approximately 10 cm during storm surges. It also achieves 4.0 cm accuracy over 12‐hr period and enables short‐term sea level prediction with an accuracy of 7 cm. These findings highlight the potential of near‐shore GNSS‐IR to strengthen tide gauge networks and marine assessments.
- Open Access
- 5 January 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (1)
Water Storage Changes of Lakes and Reservoirs Across Asia (2018–2023) and Their Effects in Flood Control
Monitoring lake and reservoir water levels is critical for water resource management and flood risk mitigation. We integrate Sentinel‐3A/B and ICESat‐2 altimetry to reconstruct monthly water levels (2018–2023) for 7,433 lakes and reservoirs (>5 km 2 ) across Asia and estimate their storage variations. Reservoirs exhibit a median annual water level change of 0.36 m/yr, far exceeding the 0.05 m/yr observed for lakes, highlighting their dominant role in surface water dynamics. Eight Asian basins flood events reveal that insufficient self‐regulation capacity of lakes is the primary flood trigger, while large reservoirs effectively mitigate flood frequency and intensity through regulation. These findings emphasize the importance of high‐precision satellite altimetry in surface water assessments and the critical role of reservoirs in modulating hydrological extremes under climate change.
- 5 January 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (1)
Open AccessWater Storage Changes of Lakes and Reservoirs Across Asia (2018–2023) and Their Effects in Flood Control
Monitoring lake and reservoir water levels is critical for water resource management and flood risk mitigation. We integrate Sentinel‐3A/B and ICESat‐2 altimetry to reconstruct monthly water levels (2018–2023) for 7,433 lakes and reservoirs (>5 km 2 ) across Asia and estimate their storage variations. Reservoirs exhibit a median annual water level change of 0.36 m/yr, far exceeding the 0.05 m/yr observed for lakes, highlighting their dominant role in surface water dynamics. Eight Asian basins flood events reveal that insufficient self‐regulation capacity of lakes is the primary flood trigger, while large reservoirs effectively mitigate flood frequency and intensity through regulation. These findings emphasize the importance of high‐precision satellite altimetry in surface water assessments and the critical role of reservoirs in modulating hydrological extremes under climate change.
- 29 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-13
LightGBM-Driven Correction of Integer-Cycle Phase Biases in GNSS-IR for Robust Sea Level Retrieval
Sea level change is becoming increasingly complex in the context of global climate change. Accurate and reliable methods for monitoring water levels are essential for advancing the research of oceanic variations. The GNSS Interferometric Reflectometry (GNSS-IR) technique emerges as a complementary approach, leveraging signal-to-noise ratio (SNR) oscillations from reflected GNSS signals to estimate sea surface level. In GNSS-IR sea level retrieval, various factors including dynamic sea surface variations, surface roughness, and observation noise can introduce biases in reflector height (RH). These biases subsequently lead to phase errors in the SNR fitting process. A linear model is often employed to correct such phase deviations. The core challenge lies in the linear phase correction model’s inability to resolve phase deviations exceeding ±π, which introduces integer-cycle ambiguities. These errors, driven by the combined effects of multiple sources of uncertainty, result in RH residuals clustered around ±30–50 cm. To mitigate this issue, a two-stage correction method is developed: (1) a LightGBM (Light Gradient Boosting Machine) classifier identifies and corrects ±2π phase biases by analyzing SNR quality metrics (e.g., peak-to-noise ratio, full width at half maximum), environmental parameters (e.g., sea surface height change rate), and fitting residuals; (2) a sliding-window robust estimation refines RH values by dynamically compensating for residual outliers and tidal fluctuations. Validation across three coastal GNSS stations (SC02, CALC, FLCK) demonstrates significant improvements. The LightGBM model achieved 97.9~99.3% classification accuracy, effectively isolating and correcting 72–93% of ±2π deviations. Combined with robust estimation, the method reduced root mean square error (RMSE) by up to 48.6% compared to classical Lomb-Scargle Periodogram (LSP) results. Residual distributions transitioned from bimodal clusters to centralized peaks near zero, confirming the elimination of stratification artifacts.
- 29 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-13
LightGBM-Driven Correction of Integer-Cycle Phase Biases in GNSS-IR for Robust Sea Level Retrieval
Sea level change is becoming increasingly complex in the context of global climate change. Accurate and reliable methods for monitoring water levels are essential for advancing the research of oceanic variations. The GNSS Interferometric Reflectometry (GNSS-IR) technique emerges as a complementary approach, leveraging signal-to-noise ratio (SNR) oscillations from reflected GNSS signals to estimate sea surface level. In GNSS-IR sea level retrieval, various factors including dynamic sea surface variations, surface roughness, and observation noise can introduce biases in reflector height (RH). These biases subsequently lead to phase errors in the SNR fitting process. A linear model is often employed to correct such phase deviations. The core challenge lies in the linear phase correction model’s inability to resolve phase deviations exceeding ±π, which introduces integer-cycle ambiguities. These errors, driven by the combined effects of multiple sources of uncertainty, result in RH residuals clustered around ±30–50 cm. To mitigate this issue, a two-stage correction method is developed: (1) a LightGBM (Light Gradient Boosting Machine) classifier identifies and corrects ±2π phase biases by analyzing SNR quality metrics (e.g., peak-to-noise ratio, full width at half maximum), environmental parameters (e.g., sea surface height change rate), and fitting residuals; (2) a sliding-window robust estimation refines RH values by dynamically compensating for residual outliers and tidal fluctuations. Validation across three coastal GNSS stations (SC02, CALC, FLCK) demonstrates significant improvements. The LightGBM model achieved 97.9~99.3% classification accuracy, effectively isolating and correcting 72–93% of ±2π deviations. Combined with robust estimation, the method reduced root mean square error (RMSE) by up to 48.6% compared to classical Lomb-Scargle Periodogram (LSP) results. Residual distributions transitioned from bimodal clusters to centralized peaks near zero, confirming the elimination of stratification artifacts.
- Open Access
- 9 September 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (18) , 3132
Assessing the Performance of GNSS-IR for Sea Level Monitoring During Hurricane-Induced Storm Surges
With the intensification of extreme climate change, hurricanes are becoming increasingly frequent, and coastal regions are often impacted by hurricane-induced storm surges. While GNSS-IR (Global Navigation Satellite System–Interferometric Reflectometry) has been widely used for sea level monitoring, its application in extreme weather events such as storm surges remains limited. This study focuses on GNSS-IR-based storm surge monitoring and investigates six hurricane events using data from two GNSS stations (CALC and FLCK) located in the Gulf of Mexico. The monitoring accuracy and effectiveness are systematically evaluated. Results indicate that GNSS-IR achieves a sea level accuracy of approximately 7 cm under non-storm surge conditions. Compared with the FLCK station, the CALC station has a wider field of water reflection and higher precision observation results. This further confirms that an open environment is a prerequisite for ensuring the accuracy of GNSS-IR measurements. However, accuracy degrades significantly during storm surges, reaching only a decimeter-level precision. Multi-GNSS observations notably improve temporal resolution, with valid observation periods covering 83% to 97% of the total time, compared with only 40% to 60% for single-system observations. Moreover, dynamic sea level variations are closely correlated with hurricane trajectories, which affects GNSS-IR measurement accuracy to some extent. The GPS L2 band is particularly sensitive, likely due to the complex surface-reflected condition caused by hurricanes. Despite reduced accuracy during storm surges, GNSS-IR remains capable of capturing dynamic sea level changes effectively, demonstrating its potential as a valuable supplement to the existing observation networks for extreme weather monitoring.
- 9 September 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (18) , 3132
Open AccessAssessing the Performance of GNSS-IR for Sea Level Monitoring During Hurricane-Induced Storm Surges
With the intensification of extreme climate change, hurricanes are becoming increasingly frequent, and coastal regions are often impacted by hurricane-induced storm surges. While GNSS-IR (Global Navigation Satellite System–Interferometric Reflectometry) has been widely used for sea level monitoring, its application in extreme weather events such as storm surges remains limited. This study focuses on GNSS-IR-based storm surge monitoring and investigates six hurricane events using data from two GNSS stations (CALC and FLCK) located in the Gulf of Mexico. The monitoring accuracy and effectiveness are systematically evaluated. Results indicate that GNSS-IR achieves a sea level accuracy of approximately 7 cm under non-storm surge conditions. Compared with the FLCK station, the CALC station has a wider field of water reflection and higher precision observation results. This further confirms that an open environment is a prerequisite for ensuring the accuracy of GNSS-IR measurements. However, accuracy degrades significantly during storm surges, reaching only a decimeter-level precision. Multi-GNSS observations notably improve temporal resolution, with valid observation periods covering 83% to 97% of the total time, compared with only 40% to 60% for single-system observations. Moreover, dynamic sea level variations are closely correlated with hurricane trajectories, which affects GNSS-IR measurement accuracy to some extent. The GPS L2 band is particularly sensitive, likely due to the complex surface-reflected condition caused by hurricanes. Despite reduced accuracy during storm surges, GNSS-IR remains capable of capturing dynamic sea level changes effectively, demonstrating its potential as a valuable supplement to the existing observation networks for extreme weather monitoring.