Keith LeChien
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keith LeChien has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Alex B. Zylstra
Pacific Fusion Corporation 3 , Fremont, California 94538
3 shared publications - C. Leland Ellison
Pacific Fusion Corporation 2 , 6082 Stewart Ave., Fremont, California 94538
3 shared publications - Nathan B. Meezan
Pacific Fusion Corporation 2 , 6082 Stewart Ave., Fremont, California 94538
3 shared publications - Adam Reyes
Pacific Fusion Corporation 2 , 6082 Stewart Ave., Fremont, California 94538
2 shared publications - Anthony J. Link
Pacific Fusion Corporation , Fremont, California 94538
2 shared publications - Chiatai Chen
Pacific Fusion Corporation , Fremont, California 94538
2 shared publications
Latest Publications
- Open Access
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Validation of FLASH for magnetically driven inertial confinement fusion target design
FLASH is a widely available radiation magnetohydrodynamics code used for astrophysics, laboratory plasma science, high energy density physics, and inertial confinement fusion (ICF). Increasing interest in magnetically driven inertial confinement fusion, including Pacific fusion's development of a 60 MA demonstration system designed to achieve facility gain, motivates the improvement and validation of FLASH for modeling magnetically driven ICF concepts, such as MagLIF, at ignition scale. Here, we present a collection of six validation benchmarks from experiments at the Z Pulsed Power Facility and theoretical and simulation studies of scaling MagLIF to high currents. The benchmarks range in complexity from focused experiments of linear hydrodynamic instabilities to fully integrated MagLIF fusion experiments. With the latest addition of physics capabilities, FLASH now obtains good agreement with the experimental data, theoretical results, and leading ICF target design simulation code results across all six benchmarks. These results establish confidence in FLASH as a useful tool for designing magnetically driven ICF targets on facilities like Z and Pacific fusion's upcoming 60 MA Demonstration System.
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Open AccessValidation of FLASH for magnetically driven inertial confinement fusion target design
FLASH is a widely available radiation magnetohydrodynamics code used for astrophysics, laboratory plasma science, high energy density physics, and inertial confinement fusion (ICF). Increasing interest in magnetically driven inertial confinement fusion, including Pacific fusion's development of a 60 MA demonstration system designed to achieve facility gain, motivates the improvement and validation of FLASH for modeling magnetically driven ICF concepts, such as MagLIF, at ignition scale. Here, we present a collection of six validation benchmarks from experiments at the Z Pulsed Power Facility and theoretical and simulation studies of scaling MagLIF to high currents. The benchmarks range in complexity from focused experiments of linear hydrodynamic instabilities to fully integrated MagLIF fusion experiments. With the latest addition of physics capabilities, FLASH now obtains good agreement with the experimental data, theoretical results, and leading ICF target design simulation code results across all six benchmarks. These results establish confidence in FLASH as a useful tool for designing magnetically driven ICF targets on facilities like Z and Pacific fusion's upcoming 60 MA Demonstration System.
- Open Access
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Opportunities in pulsed magnetic fusion energy
Fusion is a potentially transformational energy technology, which promises limitless clean energy. Yet, it requires continued scientific and technological development to realize its potential. The conditions necessary for fusion energy gain in terms of the product of plasma pressure P and confinement time τ have been known for many decades. An underappreciated fact is that pulsed magnetic fusion (PMF) has demonstrated Pτ performance on par with laser-driven inertial confinement fusion and tokamaks despite receiving only a small fraction of investment relative to those concepts. In light of this demonstrated performance, well-established scaling relations, and opportunities for further innovations, here we advocate for PMF as the most attractive path toward commercialization of fusion energy.
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Open AccessOpportunities in pulsed magnetic fusion energy
Fusion is a potentially transformational energy technology, which promises limitless clean energy. Yet, it requires continued scientific and technological development to realize its potential. The conditions necessary for fusion energy gain in terms of the product of plasma pressure P and confinement time τ have been known for many decades. An underappreciated fact is that pulsed magnetic fusion (PMF) has demonstrated Pτ performance on par with laser-driven inertial confinement fusion and tokamaks despite receiving only a small fraction of investment relative to those concepts. In light of this demonstrated performance, well-established scaling relations, and opportunities for further innovations, here we advocate for PMF as the most attractive path toward commercialization of fusion energy.
- Open Access
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Affordable, manageable, practical, and scalable (AMPS) high-yield and high-gain inertial fusion
High-yield inertial fusion offers a transformative path to affordable, clean, firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We propose that pulser-driven inertial fusion energy (IFE), which uses high-current pulsed-power technology to compress targets to thermonuclear conditions, can achieve this goal. In this paper, we detail the physics basis for pulser IFE, focusing on magnetized liner inertial fusion, where cylindrical metal liners compress DT fuel under strong magnetic fields and preheat. We discuss how the low implosion velocities, direct-drive efficiency, and scalable pulser architecture can achieve ignition-level conditions at low capital cost. Our multi-dimensional simulations, benchmarked against experiments at the Z facility, show that scaling from 20 to 50–60 MA of current enables net facility gain. We then introduce our Demonstration System (DS), a pulsed-power driver designed to deliver more than 60 MA and store approximately 80 MJ of energy. The DS is designed to achieve a 1000× increase in effective performance compared to the NIF, delivering approximately 100× greater facility-level energy gain—and importantly, achieving net facility gain, or Qf>1—at just 1/10 the capital cost. We also examine the engineering requirements for repetitive operation, target fabrication, and chamber maintenance, highlighting a practical roadmap to commercial power plants.
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Open AccessAffordable, manageable, practical, and scalable (AMPS) high-yield and high-gain inertial fusion
High-yield inertial fusion offers a transformative path to affordable, clean, firm power and advanced defense capabilities. Recent milestones at large facilities, particularly the National Ignition Facility (NIF), have demonstrated the feasibility of ignition but highlight the need for approaches that can deliver large amounts of energy to fusion targets at much higher efficiency and lower cost. We propose that pulser-driven inertial fusion energy (IFE), which uses high-current pulsed-power technology to compress targets to thermonuclear conditions, can achieve this goal. In this paper, we detail the physics basis for pulser IFE, focusing on magnetized liner inertial fusion, where cylindrical metal liners compress DT fuel under strong magnetic fields and preheat. We discuss how the low implosion velocities, direct-drive efficiency, and scalable pulser architecture can achieve ignition-level conditions at low capital cost. Our multi-dimensional simulations, benchmarked against experiments at the Z facility, show that scaling from 20 to 50–60 MA of current enables net facility gain. We then introduce our Demonstration System (DS), a pulsed-power driver designed to deliver more than 60 MA and store approximately 80 MJ of energy. The DS is designed to achieve a 1000× increase in effective performance compared to the NIF, delivering approximately 100× greater facility-level energy gain—and importantly, achieving net facility gain, or Qf>1—at just 1/10 the capital cost. We also examine the engineering requirements for repetitive operation, target fabrication, and chamber maintenance, highlighting a practical roadmap to commercial power plants.