Hong Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hong Wu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ting Liu
State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China
4 shared publications - Yong Huang
School of Chemistry and Pharmaceutical Sciences Key Laboratory for Chemistry and Molecular Engineering of Medicinal Resources (Ministry of Education of China) Guangxi Normal University Guilin P. R. China
4 shared publications - Baoxi Zuo
State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China
3 shared publications - Yi Si
XPCC Surveying Designing Institute Group Co., Ltd., Urumqi 830002, China
2 shared publications - Yubin Liu
College of Civil Engineering and Architecture, Xinjiang University, Urumqi 830017, China
2 shared publications - Bo Yang
Xinjiang Xinlu Shunjie Engineering Consulting Co., Ltd., Urumqi 830017, China
1 shared publication
Latest Publications
- Open Access
Electrochemical Impedance Spectroscopy Investigation of Accelerated Erosion Mechanisms in Cement-Based Materials Under an Applied Electric Field
To address the issues of lengthy test cycles and singular evaluation methods for the durability of cement-based materials in sulfate environments, this study conducted accelerated sulfate erosion experiments on 3D-printed cement-based materials incorporating various supplementary cementitious materials, such as fly ash (FA), silica fume (SF), and metakaolin (MK), by applying a controlled external electric field. Electrochemical impedance spectroscopy (EIS) was employed to characterize the extent of material degradation. By regulating electric field intensity and sulfate solution conditions, and integrating multiple analytical techniques including electrochemical impedance spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TG), this research revealed that the applied electric field accelerates both cement hydration and sulfate-induced degradation through enhanced ion migration. Furthermore, the impedance response characterized by electrochemical impedance spectroscopy showed a positive correlation with macroscopic mechanical properties. Comparative evaluation of sulfate resistance among cement composite systems, FA–cement composites, SF–cement composites, and MK-cement composites indicated that cement-based material with 10% FA addition exhibited the strongest corrosion resistance. This study analyzes the changes in electrochemical impedance spectroscopy characteristic parameters before and after the application of an electric field, systematically elucidating the evolution of the material’s microstructure and the patterns of durability degradation. It provides key mechanisms for understanding the durability evolution of cement-based materials exposed to sulfate environments under electric-field assistance, and lays both experimental and theoretical foundations for developing methods to enhance durability.
Open AccessElectrochemical Impedance Spectroscopy Investigation of Accelerated Erosion Mechanisms in Cement-Based Materials Under an Applied Electric Field
To address the issues of lengthy test cycles and singular evaluation methods for the durability of cement-based materials in sulfate environments, this study conducted accelerated sulfate erosion experiments on 3D-printed cement-based materials incorporating various supplementary cementitious materials, such as fly ash (FA), silica fume (SF), and metakaolin (MK), by applying a controlled external electric field. Electrochemical impedance spectroscopy (EIS) was employed to characterize the extent of material degradation. By regulating electric field intensity and sulfate solution conditions, and integrating multiple analytical techniques including electrochemical impedance spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TG), this research revealed that the applied electric field accelerates both cement hydration and sulfate-induced degradation through enhanced ion migration. Furthermore, the impedance response characterized by electrochemical impedance spectroscopy showed a positive correlation with macroscopic mechanical properties. Comparative evaluation of sulfate resistance among cement composite systems, FA–cement composites, SF–cement composites, and MK-cement composites indicated that cement-based material with 10% FA addition exhibited the strongest corrosion resistance. This study analyzes the changes in electrochemical impedance spectroscopy characteristic parameters before and after the application of an electric field, systematically elucidating the evolution of the material’s microstructure and the patterns of durability degradation. It provides key mechanisms for understanding the durability evolution of cement-based materials exposed to sulfate environments under electric-field assistance, and lays both experimental and theoretical foundations for developing methods to enhance durability.
- Open Access
- 23 December 2025
- Published by MDPI AG in Sustainability
- Vol. 18 (1) , 176
Electrochemical Degradation Mechanism of Desert Sand Concrete Under the Combined Action of Electric Field and Sulfate
To promote the sustainable utilization of desert sand as a regional resource in the infrastructure construction of saline-alkali areas, this paper proposes an accelerated test method based on the coupling of an external electric field (60 V) and a 2% Na2SO4 solution for rapid evaluation of its sulfate erosion resistance. The optimal mix proportion (FA 10%, water-to-binder ratio 0.33, cement-to-sand ratio 1:1.5, SF 10%) was determined through orthogonal experiments. By employing multi-scale analytical techniques including electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermal analysis (TG-DTG), the differentiated deterioration mechanisms driven by the electric field were systematically revealed. The results show that the charge-transfer resistance (Rct) decreased by about 95% within 28 d, demonstrating the characteristic of “micro-scale deterioration preceding macro-scale strength loss.” The anode region was dominated by dissolution of hydration products (porosity 5.1%), while the cathode region, due to enrichment of sulfate ions (S content 3.37 wt.%), generated a large amount of expansive products, leading to more pronounced structural damage (porosity 8.3%) and greater mass loss (cathode 12.56% > anode 9.85%). This study not only elucidates the deterioration mechanisms of desert sand concrete under coupled environmental action, but also provides a mechanism-explicit, rapid and efficient laboratory evaluation method for its sulfate resistance, offering practical guidance for durability design and prevention in engineering structures exposed to saline-alkali conditions.
- 23 December 2025
- Published by MDPI AG in Sustainability
- Vol. 18 (1) , 176
Open AccessElectrochemical Degradation Mechanism of Desert Sand Concrete Under the Combined Action of Electric Field and Sulfate
To promote the sustainable utilization of desert sand as a regional resource in the infrastructure construction of saline-alkali areas, this paper proposes an accelerated test method based on the coupling of an external electric field (60 V) and a 2% Na2SO4 solution for rapid evaluation of its sulfate erosion resistance. The optimal mix proportion (FA 10%, water-to-binder ratio 0.33, cement-to-sand ratio 1:1.5, SF 10%) was determined through orthogonal experiments. By employing multi-scale analytical techniques including electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermal analysis (TG-DTG), the differentiated deterioration mechanisms driven by the electric field were systematically revealed. The results show that the charge-transfer resistance (Rct) decreased by about 95% within 28 d, demonstrating the characteristic of “micro-scale deterioration preceding macro-scale strength loss.” The anode region was dominated by dissolution of hydration products (porosity 5.1%), while the cathode region, due to enrichment of sulfate ions (S content 3.37 wt.%), generated a large amount of expansive products, leading to more pronounced structural damage (porosity 8.3%) and greater mass loss (cathode 12.56% > anode 9.85%). This study not only elucidates the deterioration mechanisms of desert sand concrete under coupled environmental action, but also provides a mechanism-explicit, rapid and efficient laboratory evaluation method for its sulfate resistance, offering practical guidance for durability design and prevention in engineering structures exposed to saline-alkali conditions.
- Open Access
- 23 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (19) , 10316
Analysis of the Mechanical Properties, Durability, and Micro-Mechanisms of Alkali-Activated Fly Ash Mortar
The search for sustainable and economical alternative materials has become a top priority in response to the increasing scarcity of natural river sand resources; as a result, a new alkali-activated granulated blast-furnace slag (GGBS)/fly ash (FA) composite cement material innovatively using Tuokexun Desert sand as aggregate has emerged as a good strategy. In this study, GGBS/FA was used in place of cement; the effects of the water glass modulus, alkali equivalent, and FA content on the material’s properties were systematically studied, and the hydration reaction mechanism and durability characteristics were revealed. The material was found to form a stable calcium aluminosilicate hydrate (C-(A)-S-H) gel structure under a specific ratio, which not only displayed excellent mechanical properties (a compressive strength of up to 83.2 MPa), but also showed outstanding resistance to high temperatures (>600 °C) and acid–alkali erosion. Microscopic analysis showed that the phase transition behaviour of C-(A)-S-H was a key factor affecting the material properties under high-temperature and acid–alkali environments. This study provides a new method for the preparation of high-performance building materials using local materials in desert areas, which is of great significance for promoting the construction of sustainable infrastructure in arid areas.
- 23 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (19) , 10316
Open AccessAnalysis of the Mechanical Properties, Durability, and Micro-Mechanisms of Alkali-Activated Fly Ash Mortar
The search for sustainable and economical alternative materials has become a top priority in response to the increasing scarcity of natural river sand resources; as a result, a new alkali-activated granulated blast-furnace slag (GGBS)/fly ash (FA) composite cement material innovatively using Tuokexun Desert sand as aggregate has emerged as a good strategy. In this study, GGBS/FA was used in place of cement; the effects of the water glass modulus, alkali equivalent, and FA content on the material’s properties were systematically studied, and the hydration reaction mechanism and durability characteristics were revealed. The material was found to form a stable calcium aluminosilicate hydrate (C-(A)-S-H) gel structure under a specific ratio, which not only displayed excellent mechanical properties (a compressive strength of up to 83.2 MPa), but also showed outstanding resistance to high temperatures (>600 °C) and acid–alkali erosion. Microscopic analysis showed that the phase transition behaviour of C-(A)-S-H was a key factor affecting the material properties under high-temperature and acid–alkali environments. This study provides a new method for the preparation of high-performance building materials using local materials in desert areas, which is of great significance for promoting the construction of sustainable infrastructure in arid areas.
- Open Access
Physicochemical Properties of Alkali-Activated Ground-Granulated Blast Furnace Slag (GGBS)/High-Calcium Fly Ash (HCFA) Cementitious Composites
This study advances alkali-activated cementitious materials (AACMs) by developing a ground-granulated blast furnace slag/high-calcium fly ash (GGBS/HCFA) composite that incorporates Tuokexun desert sand and by establishing a clear linkage between activator chemistry, mix proportions, curing regimen, and microstructural mechanisms. The innovation lies in valorizing industrial by-products and desert sand while systematically optimizing the aqueous glass modulus, alkali equivalent, HCFA dosage, and curing temperature/time, and coupling mechanical testing with XRD/FTIR/SEM to reveal performance–structure relationships under thermal and chemical attacks. The optimized binder (aqueous glass modulus 1.2, alkali equivalent 6%, and HCFA 20%) achieved 28-day compressive and flexural strengths of 52.8 MPa and 9.5 MPa, respectively; increasing HCFA beyond 20% reduced compressive strength, while flexural strength peaked at 20%. The preferred curing condition was 70 °C for 12 h. Characterization showed C-(A)-S-H as the dominant gel; elevated temperature led to its decomposition, acid exposure produced abundant CaSO4, and NaOH exposure formed N-A-S-H, each correlating with strength loss. Quantitatively, acid resistance was weaker than alkali resistance and both deteriorated with concentration: in H2SO4, 28-day mass loss rose from 1.22% to 4.16%, with compressive/flexural strength retention dropping to 75.2%, 71.2%, 63.4%, and 57.4% and 65.3%, 61.6%, 58.9%, and 49.5%, respectively; in NaOH (0.2/0.5/0.8/1.0 mol/L), 28-day mass change was +0.74%, +0.88%, −1.85%, and −2.06%, compressive strength declined in all cases (smallest drop 7.77% at 0.2 mol/L), and flexural strength increased at lower alkalinity, consistent with a pore-filling micro-densification effect before gel dissolution/cracking dominates. Practically, the recommended mix and curing window deliver structural-grade performance while improving high-temperature and acid/alkali resistance relative to non-optimized formulations, offering a scalable, lower-carbon route to utilize regional desert sand and industrial wastes in durable cementitious applications.
Open AccessPhysicochemical Properties of Alkali-Activated Ground-Granulated Blast Furnace Slag (GGBS)/High-Calcium Fly Ash (HCFA) Cementitious Composites
This study advances alkali-activated cementitious materials (AACMs) by developing a ground-granulated blast furnace slag/high-calcium fly ash (GGBS/HCFA) composite that incorporates Tuokexun desert sand and by establishing a clear linkage between activator chemistry, mix proportions, curing regimen, and microstructural mechanisms. The innovation lies in valorizing industrial by-products and desert sand while systematically optimizing the aqueous glass modulus, alkali equivalent, HCFA dosage, and curing temperature/time, and coupling mechanical testing with XRD/FTIR/SEM to reveal performance–structure relationships under thermal and chemical attacks. The optimized binder (aqueous glass modulus 1.2, alkali equivalent 6%, and HCFA 20%) achieved 28-day compressive and flexural strengths of 52.8 MPa and 9.5 MPa, respectively; increasing HCFA beyond 20% reduced compressive strength, while flexural strength peaked at 20%. The preferred curing condition was 70 °C for 12 h. Characterization showed C-(A)-S-H as the dominant gel; elevated temperature led to its decomposition, acid exposure produced abundant CaSO4, and NaOH exposure formed N-A-S-H, each correlating with strength loss. Quantitatively, acid resistance was weaker than alkali resistance and both deteriorated with concentration: in H2SO4, 28-day mass loss rose from 1.22% to 4.16%, with compressive/flexural strength retention dropping to 75.2%, 71.2%, 63.4%, and 57.4% and 65.3%, 61.6%, 58.9%, and 49.5%, respectively; in NaOH (0.2/0.5/0.8/1.0 mol/L), 28-day mass change was +0.74%, +0.88%, −1.85%, and −2.06%, compressive strength declined in all cases (smallest drop 7.77% at 0.2 mol/L), and flexural strength increased at lower alkalinity, consistent with a pore-filling micro-densification effect before gel dissolution/cracking dominates. Practically, the recommended mix and curing window deliver structural-grade performance while improving high-temperature and acid/alkali resistance relative to non-optimized formulations, offering a scalable, lower-carbon route to utilize regional desert sand and industrial wastes in durable cementitious applications.