Honglei Mo
Honglei Mo has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Jianning Chu
Hubei Key Laboratory of Modern Manufacturing Quality Engineering, School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
3 shared publications - Xiao Chen
Hubei Key Laboratory of Modern Manufacturing Quality Engineering, School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
3 shared publications - Xie Chen
Shanghai Aerospace Control Technology Institute, Shanghai 201109, China
3 shared publications - Lingxi Guo
Shanghai Aerospace Control Technology Institute, Shanghai 201109, China
2 shared publications - Ruoxin Wang
Department of Mechanical Engineering, University of Maryland College Park, College Park, MD 20742, USA
2 shared publications - Zili Zhang
State Key Laboratory of Ultra-Precision Machining Technology, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong 999077, China
2 shared publications
Latest Publications
- Open Access
- 10 February 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (2) , 226
A Transferable Digital Twin-Driven Process Design Framework for High-Performance Multi-Jet Polishing
The multi-jet polishing process (MJP) demonstrates high shape accuracy and surface quality in the machining of nonlinear and complex surfaces, and it achieves precise and adjustable material removal rates through computer control. However, there are still challenges in terms of machining efficiency, system complexity, and stability. In particular, maintaining the polishing quality presents a greater challenge when working conditions change. To overcome these issues, this paper conceptually proposes a digital twin (DT)-driven, human-centric design framework that integrates key factors of MJP, such as jet kinetic energy, nozzle structure, abrasive type, and machining path. Within this framework, a feature-encoded transfer learning-based model is introduced to enhance surface roughness prediction accuracy and robustness under varying working conditions. The effectiveness of the proposed model was verified by conducting experiments on 3D printed workpieces under two different MJP working conditions. The results show that our proposed method yields better predictive performance and cross-condition adaptability. Overall, this work provides a predictive modeling component that supports DT-driven process design, offering a practical and extensible perspective for optimizing complex ultra-precision manufacturing processes under data-scarce and uncertainty-dominated conditions.
- 10 February 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (2) , 226
Open AccessA Transferable Digital Twin-Driven Process Design Framework for High-Performance Multi-Jet Polishing
The multi-jet polishing process (MJP) demonstrates high shape accuracy and surface quality in the machining of nonlinear and complex surfaces, and it achieves precise and adjustable material removal rates through computer control. However, there are still challenges in terms of machining efficiency, system complexity, and stability. In particular, maintaining the polishing quality presents a greater challenge when working conditions change. To overcome these issues, this paper conceptually proposes a digital twin (DT)-driven, human-centric design framework that integrates key factors of MJP, such as jet kinetic energy, nozzle structure, abrasive type, and machining path. Within this framework, a feature-encoded transfer learning-based model is introduced to enhance surface roughness prediction accuracy and robustness under varying working conditions. The effectiveness of the proposed model was verified by conducting experiments on 3D printed workpieces under two different MJP working conditions. The results show that our proposed method yields better predictive performance and cross-condition adaptability. Overall, this work provides a predictive modeling component that supports DT-driven process design, offering a practical and extensible perspective for optimizing complex ultra-precision manufacturing processes under data-scarce and uncertainty-dominated conditions.
- Open Access
- 15 January 2026
- Published by MDPI AG in Preprints.org
A Transferable Digital Twin-Driven Process Design Approach for Surface Roughness Prediction in Multi-Jet Polishing
Fluid jet polishing process (FJP) demonstrates high shape accuracy and surface quality in the machining of nonlinear and complex surfaces, and it achieves precise and adjustable material removal rates through computer control. However, there are still challenges in terms of machining efficiency, system complexity, and stability. Particularly, there is uncertainty in process optimization, especially with higher challenges in optimizing process parameters after changes in working conditions. This study utilizes digital twin technology to propose a new framework for optimizing the FJP process. By reviewing the application of DT in the machining field, this paper identifies the limitations of existing methods and proposes a human-centric design approach that integrates key factors of DT-driven FJP, such as jet kinetic energy, nozzle structure, abrasive type, and machining path. This method encompasses multiple aspects from removal function models to machining path algorithms. By introducing a core method based on transfer learning, this research aims to improve the predictive accuracy, machining efficiency, and stability of the FJP process, realizing efficient and precise polishing operations. Ultimately, this paper validates the proposed method through a case study on 3D printed workpieces, discusses the key enabling technologies, and main challenges. This study not only advances the application potential of FJP process but also provides a new perspective and strategy for optimizing complex machining processes using DT technology.
- 15 January 2026
- Published by MDPI AG in Preprints.org
Open AccessA Transferable Digital Twin-Driven Process Design Approach for Surface Roughness Prediction in Multi-Jet Polishing
Fluid jet polishing process (FJP) demonstrates high shape accuracy and surface quality in the machining of nonlinear and complex surfaces, and it achieves precise and adjustable material removal rates through computer control. However, there are still challenges in terms of machining efficiency, system complexity, and stability. Particularly, there is uncertainty in process optimization, especially with higher challenges in optimizing process parameters after changes in working conditions. This study utilizes digital twin technology to propose a new framework for optimizing the FJP process. By reviewing the application of DT in the machining field, this paper identifies the limitations of existing methods and proposes a human-centric design approach that integrates key factors of DT-driven FJP, such as jet kinetic energy, nozzle structure, abrasive type, and machining path. This method encompasses multiple aspects from removal function models to machining path algorithms. By introducing a core method based on transfer learning, this research aims to improve the predictive accuracy, machining efficiency, and stability of the FJP process, realizing efficient and precise polishing operations. Ultimately, this paper validates the proposed method through a case study on 3D printed workpieces, discusses the key enabling technologies, and main challenges. This study not only advances the application potential of FJP process but also provides a new perspective and strategy for optimizing complex machining processes using DT technology.
- Open Access
- 14 October 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (10) , 1165
Enhancing the Machinability of Sapphire via Ion Implantation and Laser-Assisted Diamond Machining
Sapphire crystals, owing to their outstanding mechanical and optical properties, which are widely used in advanced optics, microelectronic devices, and medical instruments. The manufacturing precision of sapphire optical components critically affects the performance of advanced optical systems. However, the extremely high hardness and low fracture toughness of sapphire make it a typical hard-to-machine material, prone to brittle surface fractures and subsurface damage during material removal. Improving the machinability of sapphire remains a pressing challenge in advanced manufacturing. In this study, surface modification and enhanced ductility of C-plane sapphire were achieved via ion implantation, and the machinability of the modified sapphire was further improved through laser-assisted diamond machining (LADM). Monte Carlo simulations were employed to investigate the interaction mechanisms between incident ions and the target material. Based on the simulation results, phosphorus ion implantation experiments were conducted, and transmission electron microscopy observation was used to characterize the microstructural evolution of the modified layer, while the optical properties of the samples before and after modification were analyzed. Finally, groove cutting experiments verified the enhancement in ductile machinability of the modified sapphire under LADM. At a laser power of 16 W, the ductile–brittle transition depth of the modified sapphire increased to 450.67 nm, representing a 51.57% improvement over conventional cutting. The findings of this study provide valuable insights for improving the ductile machining performance of hard and brittle materials.
- 14 October 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (10) , 1165
Open AccessEnhancing the Machinability of Sapphire via Ion Implantation and Laser-Assisted Diamond Machining
Sapphire crystals, owing to their outstanding mechanical and optical properties, which are widely used in advanced optics, microelectronic devices, and medical instruments. The manufacturing precision of sapphire optical components critically affects the performance of advanced optical systems. However, the extremely high hardness and low fracture toughness of sapphire make it a typical hard-to-machine material, prone to brittle surface fractures and subsurface damage during material removal. Improving the machinability of sapphire remains a pressing challenge in advanced manufacturing. In this study, surface modification and enhanced ductility of C-plane sapphire were achieved via ion implantation, and the machinability of the modified sapphire was further improved through laser-assisted diamond machining (LADM). Monte Carlo simulations were employed to investigate the interaction mechanisms between incident ions and the target material. Based on the simulation results, phosphorus ion implantation experiments were conducted, and transmission electron microscopy observation was used to characterize the microstructural evolution of the modified layer, while the optical properties of the samples before and after modification were analyzed. Finally, groove cutting experiments verified the enhancement in ductile machinability of the modified sapphire under LADM. At a laser power of 16 W, the ductile–brittle transition depth of the modified sapphire increased to 450.67 nm, representing a 51.57% improvement over conventional cutting. The findings of this study provide valuable insights for improving the ductile machining performance of hard and brittle materials.
- Open Access
- 15 September 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (9) , 1049
Atomic Insight into the Nano-Grinding Mechanism of Reaction-Bonded Silicon Carbide: Effect of Abrasive Size
Reaction-bonded silicon carbide (RB-SiC) is a high-performance ceramic material known for its excellent mechanical, thermal, and chemical properties. It contains phases with different mechanical properties, which introduce complex machining mechanisms. In the present work, molecular dynamics (MD) simulation was conducted to investigate the effect of abrasive size on the nano-grinding mechanism of RB-SiC. The surface morphology and subsurface deformation mechanism were investigated. The simulation results suggest that when a small abrasive is used, the surface swelling of SiC is primarily generated by the bending and tearing of SiC at the interfaces. As the abrasive radius increases, the surface swelling is mainly formed by Si atoms, which is identified as elastic recovery. Meanwhile, the material removal rate gradually decreases, and the depth of plastic deformation is obviously increased. Stocking of Si is more apparent at the interface, and obvious sliding of SiC grains is observed, forming edge cracks at the margin of the workpiece. In the subsurface workpiece, the high-pressure phase transition (HPPT) of Si is promoted, and the squeeze of disordered Si is obvious with more dislocations formed when larger abrasive is used.
- 15 September 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (9) , 1049
Open AccessAtomic Insight into the Nano-Grinding Mechanism of Reaction-Bonded Silicon Carbide: Effect of Abrasive Size
Reaction-bonded silicon carbide (RB-SiC) is a high-performance ceramic material known for its excellent mechanical, thermal, and chemical properties. It contains phases with different mechanical properties, which introduce complex machining mechanisms. In the present work, molecular dynamics (MD) simulation was conducted to investigate the effect of abrasive size on the nano-grinding mechanism of RB-SiC. The surface morphology and subsurface deformation mechanism were investigated. The simulation results suggest that when a small abrasive is used, the surface swelling of SiC is primarily generated by the bending and tearing of SiC at the interfaces. As the abrasive radius increases, the surface swelling is mainly formed by Si atoms, which is identified as elastic recovery. Meanwhile, the material removal rate gradually decreases, and the depth of plastic deformation is obviously increased. Stocking of Si is more apparent at the interface, and obvious sliding of SiC grains is observed, forming edge cracks at the margin of the workpiece. In the subsurface workpiece, the high-pressure phase transition (HPPT) of Si is promoted, and the squeeze of disordered Si is obvious with more dislocations formed when larger abrasive is used.