Jie Jin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jie Jin has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Jun Zheng
Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials, Ministry of Education, Anhui University of Technology, Ma’anshan 243002, China
1 shared publication - Qianqian Cheng
State Key Laboratory of Tribology in Advanced Equipment (SKLT), Tsinghua University, Beijing 100084, People’s Republic of China
1 shared publication
Latest Publications
- Open Access
- 16 September 2025
- Published by IOP Publishing in Materials Futures
- Vol. 4 (4) , 045002
HIP-driven microstructural evolution in TiN/Ti cermet-modified layers enhances wide temperature range wear resistance
This study investigates the optimization of cermet-modified layers (CML) on Ti6Al4V titanium alloy surfaces, prepared via laser sintering-assisted nitrogen reaction followed by hot isostatic pressing (HIP) post-treatment. The laser-sintered CML exhibited high residual tensile stresses (∼800 MPa), metastable α′-Ti phases, and dislocation cells, leading to high hardness but low ductility and crack susceptibility. HIP treatment at 900 °C and 150 MPa induced phase transformation from needle-like α′-Ti to homogenized α/β-Ti phases and promoted TiN (tetragonal) precipitation, reducing residual stresses by ∼8-fold and enhancing both plasticity and hardness (from 848 to 908 HV). The TiN/Ti interface evolved from a stacked-fault structure to a coherent boundary with a ∼1 nm amorphous transition layer, strengthening interfacial bonding and suppressing crack propagation. These microstructural changes resulted in a strength-toughness synergy, improving wear resistance by ∼25% at 25 °C and ∼3.6 times at 500 °C, attributed to enhanced TiN particle retention and a robust friction glaze layer. The findings provide insights into tailoring cermet-modified titanium alloys for superior tribological performance across a broad temperature range.
- 16 September 2025
- Published by IOP Publishing in Materials Futures
- Vol. 4 (4) , 045002
Open AccessHIP-driven microstructural evolution in TiN/Ti cermet-modified layers enhances wide temperature range wear resistance
This study investigates the optimization of cermet-modified layers (CML) on Ti6Al4V titanium alloy surfaces, prepared via laser sintering-assisted nitrogen reaction followed by hot isostatic pressing (HIP) post-treatment. The laser-sintered CML exhibited high residual tensile stresses (∼800 MPa), metastable α′-Ti phases, and dislocation cells, leading to high hardness but low ductility and crack susceptibility. HIP treatment at 900 °C and 150 MPa induced phase transformation from needle-like α′-Ti to homogenized α/β-Ti phases and promoted TiN (tetragonal) precipitation, reducing residual stresses by ∼8-fold and enhancing both plasticity and hardness (from 848 to 908 HV). The TiN/Ti interface evolved from a stacked-fault structure to a coherent boundary with a ∼1 nm amorphous transition layer, strengthening interfacial bonding and suppressing crack propagation. These microstructural changes resulted in a strength-toughness synergy, improving wear resistance by ∼25% at 25 °C and ∼3.6 times at 500 °C, attributed to enhanced TiN particle retention and a robust friction glaze layer. The findings provide insights into tailoring cermet-modified titanium alloys for superior tribological performance across a broad temperature range.