Seungchul Shin
Seungchul Shin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- David Kim
Department of Mechanical System Engineering, Myongji University, Yongin 17058, Republic of Korea
2 shared publications - Dongil Choi
Department of Mechanical System Engineering, Myongji University, Yongin 17058, Republic of Korea
2 shared publications - Minjun Choi
Econet Center, Neuromeka, Seoul 04782, Republic of Korea
2 shared publications - Seongyong Hur
Department of Mechanical System Engineering, Myongji University, Yongin 17058, Republic of Korea
2 shared publications - Seongmin Ahn
DH AUTOEYE, WOOMI NEWV, Hwaseong 18468, Republic of Korea
1 shared publication - Taesoo Kim
Department of Mechanical System Engineering, Myongji University, Yongin 17058, Republic of Korea, Republic of Korea
1 shared publication
Latest Publications
- Open Access
Development and Balancing Control of Control Moment Gyroscope (CMG) Unicycle–Legged Robot
A wheeled–legged robot has the advantage of stable and agile movement on flat ground and an excellent ability to overcome obstacles. However, when faced with a narrow footprint, there is a limit to its ability to move. We developed the control moment gyroscope (CMG) unicycle–legged robot to solve this problem. A scissored pair of CMGs was applied to control the roll balance, and the pitch balance was modeled as a double-inverted pendulum. We performed Linear Quadratic Regulator (LQR) control and model predictive control (MPC) in a system in which the control systems in the roll and pitch directions were separated. We also devised a method for controlling the rotation of the robot in the yaw direction using torque generated by the CMG, and the performance of these controllers was verified in the Gazebo simulator. In addition, forward driving control was performed to verify mobility, which is the main advantage of the wheeled–legged robot; it was confirmed that this control enabled the robot to pass through a narrow space of 0.15 m. Before implementing the verified controllers in the real world, we built a CMG test platform and confirmed that balancing control was maintained within .Open AccessDevelopment and Balancing Control of Control Moment Gyroscope (CMG) Unicycle–Legged Robot
A wheeled–legged robot has the advantage of stable and agile movement on flat ground and an excellent ability to overcome obstacles. However, when faced with a narrow footprint, there is a limit to its ability to move. We developed the control moment gyroscope (CMG) unicycle–legged robot to solve this problem. A scissored pair of CMGs was applied to control the roll balance, and the pitch balance was modeled as a double-inverted pendulum. We performed Linear Quadratic Regulator (LQR) control and model predictive control (MPC) in a system in which the control systems in the roll and pitch directions were separated. We also devised a method for controlling the rotation of the robot in the yaw direction using torque generated by the CMG, and the performance of these controllers was verified in the Gazebo simulator. In addition, forward driving control was performed to verify mobility, which is the main advantage of the wheeled–legged robot; it was confirmed that this control enabled the robot to pass through a narrow space of 0.15 m. Before implementing the verified controllers in the real world, we built a CMG test platform and confirmed that balancing control was maintained within . - Open Access
- 22 September 2025
- Published by MDPI AG in Preprints.org
Control of a Self-Balancing Two-Wheeled Cargo Transport Robot with Separation-Combination Capability
The Single Inverted Pendulum (SIP) model is widely employed in various robotics applications for balance control due to its structural simplicity and ease of implementation. Self-balancing two-wheeled transport robots offer the advantage of maintaining stability while enabling dynamic acceleration and deceleration. However, their performance is limited when carrying heavy loads, and maintaining stable balance during the loading process remains challenging. To address these limitations, this study proposes a control strategy for a pair of self-balancing two-wheeled transport robots that operate cooperatively through a separation–combination mechanism. Simulations were conducted to compare the performance of the Linear Quadratic Regulator (LQR) and Model Predictive Control (MPC) under a self-balancing condition with an external force of 100 N applied. Additionally, the proposed separation–combination method was evaluated through a simulation involving the transfer of a 20 kg delivery module. The results showed that both methods could stably transport the load, while the MPC-based approach reduced the wheel torque by approximately 50% compared to the LQR method. These findings indicate that a two-wheeled robot employing MPC in conjunction with the separation–combination method is well-suited for transporting heavy loads.
- 22 September 2025
- Published by MDPI AG in Preprints.org
Open AccessControl of a Self-Balancing Two-Wheeled Cargo Transport Robot with Separation-Combination Capability
The Single Inverted Pendulum (SIP) model is widely employed in various robotics applications for balance control due to its structural simplicity and ease of implementation. Self-balancing two-wheeled transport robots offer the advantage of maintaining stability while enabling dynamic acceleration and deceleration. However, their performance is limited when carrying heavy loads, and maintaining stable balance during the loading process remains challenging. To address these limitations, this study proposes a control strategy for a pair of self-balancing two-wheeled transport robots that operate cooperatively through a separation–combination mechanism. Simulations were conducted to compare the performance of the Linear Quadratic Regulator (LQR) and Model Predictive Control (MPC) under a self-balancing condition with an external force of 100 N applied. Additionally, the proposed separation–combination method was evaluated through a simulation involving the transfer of a 20 kg delivery module. The results showed that both methods could stably transport the load, while the MPC-based approach reduced the wheel torque by approximately 50% compared to the LQR method. These findings indicate that a two-wheeled robot employing MPC in conjunction with the separation–combination method is well-suited for transporting heavy loads.