Antonios E. Trakakis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antonios E. Trakakis has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Nikiforos Stamatiadis
University of Kentucky
3 shared publications - Stergios Mavromatis
School of Civil Engineering, National Technical University of Athens, Greece
3 shared publications - Vassilios Matragos
School of Civil Engineering, National Technical University of Athens, Greece
3 shared publications - Antonios Kontizas
School of Civil Engineering, National Technical University of Athens, Greece
2 shared publications - Kiriakos Amiridis
Laboratory of Transportation Engineering, National Technical University of Athens, 9, Iroon Polytechniou Str., GR-15773 Athens, Greece
2 shared publications - Basil Psarianos
Laboratory of Transportation Engineering, National Technical University of Athens, 9, Iroon Polytechniou Str., GR-15773 Athens, Greece
1 shared publication
Latest Publications
- Open Access
- 26 March 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (4) , 117
The Role of Gaussian and Mean Curvature in 3D Highway Geometric Design and Safety
This study investigates the use of three-dimensional (3D) roadway surface-based geometric indicators in traffic crash analysis, with the objective of evaluating their potential to represent the combined effects of highway alignment features more effectively than traditional two-dimensional (2D) indicators. The roadway surface is modeled as a continuous 3D B-spline surface, from which surface-based geometric metrics derived from differential geometry—specifically Gaussian curvature and mean curvature—are calculated. The roadway is segmented into fixed-length surface patches, and crashes are spatially allocated to these patches using a point-in-polygon approach. Patch-level crash frequencies are analyzed using negative binomial regression models, with traffic exposure accounted for through annual average daily traffic (AADT). The results demonstrate that surface-based 3D curvature metrics are statistically significant explanatory variables in crash frequency modeling and are capable of capturing geometric interactions that are not explicitly represented by conventional 2D alignment measures. The proposed framework provides a proof-of-concept for incorporating 3D roadway geometry into highway safety analysis and offers a foundation for future development of integrated, surface-based crash prediction models.
- 26 March 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (4) , 117
Open AccessThe Role of Gaussian and Mean Curvature in 3D Highway Geometric Design and Safety
This study investigates the use of three-dimensional (3D) roadway surface-based geometric indicators in traffic crash analysis, with the objective of evaluating their potential to represent the combined effects of highway alignment features more effectively than traditional two-dimensional (2D) indicators. The roadway surface is modeled as a continuous 3D B-spline surface, from which surface-based geometric metrics derived from differential geometry—specifically Gaussian curvature and mean curvature—are calculated. The roadway is segmented into fixed-length surface patches, and crashes are spatially allocated to these patches using a point-in-polygon approach. Patch-level crash frequencies are analyzed using negative binomial regression models, with traffic exposure accounted for through annual average daily traffic (AADT). The results demonstrate that surface-based 3D curvature metrics are statistically significant explanatory variables in crash frequency modeling and are capable of capturing geometric interactions that are not explicitly represented by conventional 2D alignment measures. The proposed framework provides a proof-of-concept for incorporating 3D roadway geometry into highway safety analysis and offers a foundation for future development of integrated, surface-based crash prediction models.
- Open Access
- 24 November 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (12) , 319
Enhancing the Superelevation Runoff Method in Circular Arcs for Mountainous Terrain Alignments
Despite the recognized importance of spiral curve implementation in highway design, several design manuals permit spiral omission depending on the geometric layout and the performance characteristics of road users. A critical safety issue associated with these methodologies arises from the potential exceedance of the maximum allowable side friction coefficient and the design utilization factor on a circular arc, particularly under wet pavement conditions. The present study aims to address a gap in geometric design manuals and the international literature by optimizing the superelevation design of the runoff section in the tangent-to-curve transition for circular arcs in mountainous terrain with a maximum design superelevation rate of up to 5%. The proposed methodology is supported by an analysis based on fundamental vehicle dynamics equilibrium equations, aiming to resolve concerns among practitioners regarding the elimination of superelevation rate transitions within the circular arc itself, with particular focus on the evaluation of the utilization factor and the applicability in icy conditions. The comparative evaluation of the demanded utilization factors resulting from this method and those defined by existing guidelines, along with the safety levels it maintains under icy conditions (i.e., compound slope up to 10%), encourages its immediate implementation in circular arcs with a design superelevation rate up to 5%, as well as further investigation into the potential application of this method in circular arcs with a design superelevation rate greater than 5% in mountainous and rolling terrains.
- 24 November 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (12) , 319
Open AccessEnhancing the Superelevation Runoff Method in Circular Arcs for Mountainous Terrain Alignments
Despite the recognized importance of spiral curve implementation in highway design, several design manuals permit spiral omission depending on the geometric layout and the performance characteristics of road users. A critical safety issue associated with these methodologies arises from the potential exceedance of the maximum allowable side friction coefficient and the design utilization factor on a circular arc, particularly under wet pavement conditions. The present study aims to address a gap in geometric design manuals and the international literature by optimizing the superelevation design of the runoff section in the tangent-to-curve transition for circular arcs in mountainous terrain with a maximum design superelevation rate of up to 5%. The proposed methodology is supported by an analysis based on fundamental vehicle dynamics equilibrium equations, aiming to resolve concerns among practitioners regarding the elimination of superelevation rate transitions within the circular arc itself, with particular focus on the evaluation of the utilization factor and the applicability in icy conditions. The comparative evaluation of the demanded utilization factors resulting from this method and those defined by existing guidelines, along with the safety levels it maintains under icy conditions (i.e., compound slope up to 10%), encourages its immediate implementation in circular arcs with a design superelevation rate up to 5%, as well as further investigation into the potential application of this method in circular arcs with a design superelevation rate greater than 5% in mountainous and rolling terrains.
- Open Access
- 22 September 2025
- Published by MDPI AG in Preprints.org
The Role of Gaussian and Mean Curvature in 3-D Highway Geometric Design and Safety
The objective of this research is to evaluate and introduce a new methodology regarding rural highway safety. Current practices rely on crash prediction models that utilize specific explanatory variables, whereas the depository of knowledge for past research is the Highway Safety Manual (HSM). Most of the prediction models in the HSM identify the effect of individual geometric elements on crash occurrence and consider their combination in a multiplicative manner, where each effect is multiplied with others to determine their combined influence. The concepts of 3-dimesnional (3-D) representation of the roadway surface have also been explored in the past aiming to model the highway structure and optimize the roadway alignment. The use of differential geometry on utilizing the 3-D roadway surface in order to understand how new metrics can be used to identify and express roadway geometric elements has been recently utilized and indicated that this may be a new approach in representing the combined effects of all geometry features into single variables. This research will further explore this potential and examine the possibility to utilize 3-D differential geometry in representing the roadway surface and utilize its associated metrics to consider the combined effect of roadway features on crashes. It is anticipated that a series of single metrics could be used that would combine horizontal and vertical alignment features and eventually predict roadway crashes in a more robust manner. It should be also noted that that the main purpose of this research is not to simply suggest predictive crash models, but to prove in a statistically concrete manner that 3-D metrics of differential geometry, e.g. Gaussian Curvature and Mean Curvature can assist in analyzing highway design and safety. Therefore, the value of this research is oriented towards the proof of concept of the link between 3-D geometry in highway design and safety. This research presents the steps and rationale of the procedure that is followed in order to complete the proposed research. Finally, the results of the suggested methodology are compared with the ones that would be derived from the, state-of-the-art, Interactive Highway Safety Design Model (IHSDM), which is essentially the software that is currently used and based on the findings of the HSM.
- 22 September 2025
- Published by MDPI AG in Preprints.org
Open AccessThe Role of Gaussian and Mean Curvature in 3-D Highway Geometric Design and Safety
The objective of this research is to evaluate and introduce a new methodology regarding rural highway safety. Current practices rely on crash prediction models that utilize specific explanatory variables, whereas the depository of knowledge for past research is the Highway Safety Manual (HSM). Most of the prediction models in the HSM identify the effect of individual geometric elements on crash occurrence and consider their combination in a multiplicative manner, where each effect is multiplied with others to determine their combined influence. The concepts of 3-dimesnional (3-D) representation of the roadway surface have also been explored in the past aiming to model the highway structure and optimize the roadway alignment. The use of differential geometry on utilizing the 3-D roadway surface in order to understand how new metrics can be used to identify and express roadway geometric elements has been recently utilized and indicated that this may be a new approach in representing the combined effects of all geometry features into single variables. This research will further explore this potential and examine the possibility to utilize 3-D differential geometry in representing the roadway surface and utilize its associated metrics to consider the combined effect of roadway features on crashes. It is anticipated that a series of single metrics could be used that would combine horizontal and vertical alignment features and eventually predict roadway crashes in a more robust manner. It should be also noted that that the main purpose of this research is not to simply suggest predictive crash models, but to prove in a statistically concrete manner that 3-D metrics of differential geometry, e.g. Gaussian Curvature and Mean Curvature can assist in analyzing highway design and safety. Therefore, the value of this research is oriented towards the proof of concept of the link between 3-D geometry in highway design and safety. This research presents the steps and rationale of the procedure that is followed in order to complete the proposed research. Finally, the results of the suggested methodology are compared with the ones that would be derived from the, state-of-the-art, Interactive Highway Safety Design Model (IHSDM), which is essentially the software that is currently used and based on the findings of the HSM.