Isidora Reyes-González
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Isidora Reyes-González has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Pablo Reyes-Contreras
Laboratorio de Biopolímeros y Materiales Biobasados, Centro de Biotecnología, Universidad de Concepción, Concepción 4030000, Chile
3 shared publications - Regis Teixeira Mendonça
Centro de Biotecnología, Universidad de Concepción, Concepción 4030000, Chile
3 shared publications - Benjamín Opazo
Programa de Doctorado en Ingeniería, Facultad de Ingeniería, Universidad del Bío-Bío, Concepción 4030000, Chile
2 shared publications - Fabiola Valdebenito
Centro de Energía, Universidad Católica de la Santísima Concepción, Concepción 4090541, Chile
2 shared publications - Isabel Carrillo-Varela
Bioforest SpA, Camino a Coronel Km 15, Coronel 4190000, Chile
2 shared publications - Alistair William Thomas King
VTT Technical Research Centre of Finland Ltd., Tietorie 4e, 02150 Espoo, Finland
1 shared publication
Latest Publications
- Open Access
Selective Dye Adsorption and Antimicrobial Performance of Cellulose–Chitosan Hydrogels and Aerogels: Role of Supramolecular Organization
Cellulose and chitosan are biopolymers widely used to prepare composites due to their complementary charges and intrinsic biocompatibility. While they are mainly of interest for medical applications, they are also suitable for water remediation. In their native states both biopolymers are non-porous; however, after dissolution and subsequent regeneration they can form porous structures that are better suited for such applications. In this work, cellulose pulp and chitosan were dissolved in an ionic liquid and regenerated in water at different mass ratios to produce hydrogels and their corresponding aerogels. The materials were structurally characterized and evaluated for dye adsorption and antimicrobial performance. Methylene blue and Congo red were selected as cationic and anionic dyes, respectively. The concentrations went from 5 to 80 mg/L in 24 h batch adsorption experiments. Chitosan-rich and intermediate cellulose–chitosan hydrogels preferentially removed Congo red, reaching 27 ± 1 mg/g and 24 ± 1 mg/g at 80 mg/L, respectively; the fully cellulose hydrogel maximized methylene blue uptake, achieving 23 ± 1 mg/g under the same conditions. SEM and XRD analyses revealed a hybrid architecture in which chitosan coats cellulose fibers and becomes more amorphous, while cellulose preserves crystalline domains that act as a rigid, highly porous backbone. Aerogels derived from freeze-dried hydrogels exhibited high porosity and water uptake, together with broad-spectrum antimicrobial activity, achieving bactericidal levels (≥99.9% inhibition) against Staphylococcus aureus for all compositions and against Escherichia coli for selected cellulose–chitosan ratios. These results demonstrate that cellulose–chitosan hydrogels and aerogels function as multifunctional bio-based materials whose supramolecular organization, surface charge distribution, and porosity can be tuned to balance adsorption selectivity and antimicrobial performance for advanced environmental applications.
Open AccessSelective Dye Adsorption and Antimicrobial Performance of Cellulose–Chitosan Hydrogels and Aerogels: Role of Supramolecular Organization
Cellulose and chitosan are biopolymers widely used to prepare composites due to their complementary charges and intrinsic biocompatibility. While they are mainly of interest for medical applications, they are also suitable for water remediation. In their native states both biopolymers are non-porous; however, after dissolution and subsequent regeneration they can form porous structures that are better suited for such applications. In this work, cellulose pulp and chitosan were dissolved in an ionic liquid and regenerated in water at different mass ratios to produce hydrogels and their corresponding aerogels. The materials were structurally characterized and evaluated for dye adsorption and antimicrobial performance. Methylene blue and Congo red were selected as cationic and anionic dyes, respectively. The concentrations went from 5 to 80 mg/L in 24 h batch adsorption experiments. Chitosan-rich and intermediate cellulose–chitosan hydrogels preferentially removed Congo red, reaching 27 ± 1 mg/g and 24 ± 1 mg/g at 80 mg/L, respectively; the fully cellulose hydrogel maximized methylene blue uptake, achieving 23 ± 1 mg/g under the same conditions. SEM and XRD analyses revealed a hybrid architecture in which chitosan coats cellulose fibers and becomes more amorphous, while cellulose preserves crystalline domains that act as a rigid, highly porous backbone. Aerogels derived from freeze-dried hydrogels exhibited high porosity and water uptake, together with broad-spectrum antimicrobial activity, achieving bactericidal levels (≥99.9% inhibition) against Staphylococcus aureus for all compositions and against Escherichia coli for selected cellulose–chitosan ratios. These results demonstrate that cellulose–chitosan hydrogels and aerogels function as multifunctional bio-based materials whose supramolecular organization, surface charge distribution, and porosity can be tuned to balance adsorption selectivity and antimicrobial performance for advanced environmental applications.
- Open Access
Discrimination of Cellulose I, II, IIII and IIIII Polymorphs in Cellulosic Fibers by NIR Hyperspectral Imaging Supported by XRD and XPS
Native cellulose I can be converted into crystalline polymorphs II and IIII, while cellulose II can be further converted into IIIII through chemical treatments that induce significant structural, physical, and chemical changes. Accurate identification and differentiation of these polymorphs is essential for predicting fiber reactivity and processing behavior, but current methods are time-consuming. This study demonstrates the potential of near-infrared hyperspectral imaging (HSI-NIR) combined with linear discriminant analysis as a rapid, non-destructive tool for polymorph discrimination. Cellulose I, II, IIII, and IIIII were produced from bleached kraft pulps of eucalyptus and pine and from cotton linters using NaOH (20% w/v) and ethylenediamine treatments. HSI-NIR successfully differentiated polymorphs based on spectral signatures in the 1480–1600 nm range, regardless of botanical source. Complementary characterization by XRD confirmed polymorph conversions, showing crystallinity reductions of 10–15% for cellulose I→II and I→IIII conversions, with crystallite size decreasing from 7.2 nm (cotton CI) to 3.2–3.4 nm in all CIIIII samples. XPS analysis revealed increased C-O surface accessibility in cellulose II and III, with complete disappearance of COOH groups in cellulose III samples. These results establish HSI as a promising screening tool for cellulose polymorph identification (>95% classification accuracy) and provide comprehensive baseline data on structural and chemical transformations that govern fiber reactivity in chemical and enzymatic processes.
Open AccessDiscrimination of Cellulose I, II, IIII and IIIII Polymorphs in Cellulosic Fibers by NIR Hyperspectral Imaging Supported by XRD and XPS
Native cellulose I can be converted into crystalline polymorphs II and IIII, while cellulose II can be further converted into IIIII through chemical treatments that induce significant structural, physical, and chemical changes. Accurate identification and differentiation of these polymorphs is essential for predicting fiber reactivity and processing behavior, but current methods are time-consuming. This study demonstrates the potential of near-infrared hyperspectral imaging (HSI-NIR) combined with linear discriminant analysis as a rapid, non-destructive tool for polymorph discrimination. Cellulose I, II, IIII, and IIIII were produced from bleached kraft pulps of eucalyptus and pine and from cotton linters using NaOH (20% w/v) and ethylenediamine treatments. HSI-NIR successfully differentiated polymorphs based on spectral signatures in the 1480–1600 nm range, regardless of botanical source. Complementary characterization by XRD confirmed polymorph conversions, showing crystallinity reductions of 10–15% for cellulose I→II and I→IIII conversions, with crystallite size decreasing from 7.2 nm (cotton CI) to 3.2–3.4 nm in all CIIIII samples. XPS analysis revealed increased C-O surface accessibility in cellulose II and III, with complete disappearance of COOH groups in cellulose III samples. These results establish HSI as a promising screening tool for cellulose polymorph identification (>95% classification accuracy) and provide comprehensive baseline data on structural and chemical transformations that govern fiber reactivity in chemical and enzymatic processes.
- Open Access
Synthesis and Characterization of Phosphorylated Cellulose Nanocrystals: Exploring Factors for Enhanced Thermal and Colloidal Stability
Phosphorylated cellulose nanocrystals (P-CNCs) are a superior alternative to conventional sulfuric acid-derived CNCs because of their enhanced thermal and colloidal stability. However, further research is needed to understand the factors influencing their synthesis and properties for advanced material applications. In this study, P-CNCs were synthesized from bleached hardwood kraft pulp (BEKP) using a controlled hydrolysis method involving pretreatment with H3PO4 followed by reaction with metaphosphoric acid (HPO3) and urea. To optimize the process, a full factorial design was employed to evaluate the effects of reaction time (60–90 min) and HPO3 concentration (3–4 M). The P-CNCs were characterized using physicochemical, morphological, and thermal analyses. Surface charge densities ranged from 757 to 1993 mmol/kg, with exceptional colloidal stability, as evidenced by zeta potentials ranging from −30.17 to −67.40 mV. Statistical analysis showed that reaction time had a significant main effect on surface charge (p-value = 0.0022) and zeta potential (p-value = 0.0448), while a significant interaction between reaction time and HPO3 concentration was observed when analyzing the surface charge (p-value = 0.0097), suggesting a combined effect of these factors on the surface modification of CNC. Crystallinity indices ranged from 63.6% to 71.3%, and the thermal stability exceeded that of the raw material. These findings contribute to a better understanding of the surface modification and stability of P-CNCs and support efforts to sustainably produce functional CNCs for advanced composite applications.
Open AccessSynthesis and Characterization of Phosphorylated Cellulose Nanocrystals: Exploring Factors for Enhanced Thermal and Colloidal Stability
Phosphorylated cellulose nanocrystals (P-CNCs) are a superior alternative to conventional sulfuric acid-derived CNCs because of their enhanced thermal and colloidal stability. However, further research is needed to understand the factors influencing their synthesis and properties for advanced material applications. In this study, P-CNCs were synthesized from bleached hardwood kraft pulp (BEKP) using a controlled hydrolysis method involving pretreatment with H3PO4 followed by reaction with metaphosphoric acid (HPO3) and urea. To optimize the process, a full factorial design was employed to evaluate the effects of reaction time (60–90 min) and HPO3 concentration (3–4 M). The P-CNCs were characterized using physicochemical, morphological, and thermal analyses. Surface charge densities ranged from 757 to 1993 mmol/kg, with exceptional colloidal stability, as evidenced by zeta potentials ranging from −30.17 to −67.40 mV. Statistical analysis showed that reaction time had a significant main effect on surface charge (p-value = 0.0022) and zeta potential (p-value = 0.0448), while a significant interaction between reaction time and HPO3 concentration was observed when analyzing the surface charge (p-value = 0.0097), suggesting a combined effect of these factors on the surface modification of CNC. Crystallinity indices ranged from 63.6% to 71.3%, and the thermal stability exceeded that of the raw material. These findings contribute to a better understanding of the surface modification and stability of P-CNCs and support efforts to sustainably produce functional CNCs for advanced composite applications.