Piero Sanga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Piero Sanga has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alejandra Sanga
Facultad de Ingenieria de Produccion y Servicios, Universidad Nacional de San Agustín de Arequipa, Arequipa 04000, Peru
5 shared publications - Celso Sanga
Facultad de Ingenieria de Produccion y Servicios, Universidad Nacional de San Agustín de Arequipa, Arequipa 04000, Peru
5 shared publications - Nelson Chambi
Facultad de Ingenieria de Produccion y Servicios, Universidad Nacional de San Agustín de Arequipa, Arequipa 04000, Peru
5 shared publications - Jorge Enrique Ortiz Porras
National University of San Marcos
1 shared publication - Julio Lu-Chang-Say
Facultad de Ingeniería Industrial, Universidad Nacional de Ingeniería, Lima 15333, Peru
1 shared publication - Rosiand Manrique
Facultad de Ingeniería Industrial, Universidad Nacional Mayor de San Marcos, Lima 15081, Peru
1 shared publication
Latest Publications
- Open Access
Risk Factors Associated with Musculoskeletal Disorders in Limbs in Mining Workers: Systematic Literature Review
A systematic review was conducted to identify ergonomic risk factors associated with musculoskeletal disorders in the limbs of mining workers, the assessment methods used, and their relationships. Following PRISMA 2020 guidelines, 53 studies from Scopus, ScienceDirect, Web of Science, MDPI, and IEEE Xplore (January 2015–May 2026) were included. Eleven risk factors were identified, with vibration (18 studies) and working hours (12 studies) being the most frequently reported. Five individual assessment methods (ISO/IEC 2631-1, REBA, OWAS, NIOSH, Risk Score), one symptom questionnaire (Nordic Questionnaire), and five hybrid/advanced methods (Bayesian Network + REBA, RULA + Nordic, SEM + Participatory Ergonomics, DMQ + Logistic Regression, RULA + Fuzzy Logic) were identified. Fifteen limb segments were evaluated, with the back (15 studies), shoulders (12 studies), and neck (12 studies) being the most studied, while wrists and elbows were notably absent. Hybrid methods demonstrated superior accuracy compared to individual approaches. Underground mining studies (58%) predominated over open-pit operations (42%). The findings provide an integrated framework connecting risk factors, affected limbs, and assessment tools. Critical gaps were identified, including the lack of wrist/elbow evaluation, underrepresentation of female miners, and absence of AI-based assessment systems. Four key challenges are proposed for future research, including developing deep learning-based ergonomic assessment tools and implementing real-time monitoring systems.
Open AccessRisk Factors Associated with Musculoskeletal Disorders in Limbs in Mining Workers: Systematic Literature Review
A systematic review was conducted to identify ergonomic risk factors associated with musculoskeletal disorders in the limbs of mining workers, the assessment methods used, and their relationships. Following PRISMA 2020 guidelines, 53 studies from Scopus, ScienceDirect, Web of Science, MDPI, and IEEE Xplore (January 2015–May 2026) were included. Eleven risk factors were identified, with vibration (18 studies) and working hours (12 studies) being the most frequently reported. Five individual assessment methods (ISO/IEC 2631-1, REBA, OWAS, NIOSH, Risk Score), one symptom questionnaire (Nordic Questionnaire), and five hybrid/advanced methods (Bayesian Network + REBA, RULA + Nordic, SEM + Participatory Ergonomics, DMQ + Logistic Regression, RULA + Fuzzy Logic) were identified. Fifteen limb segments were evaluated, with the back (15 studies), shoulders (12 studies), and neck (12 studies) being the most studied, while wrists and elbows were notably absent. Hybrid methods demonstrated superior accuracy compared to individual approaches. Underground mining studies (58%) predominated over open-pit operations (42%). The findings provide an integrated framework connecting risk factors, affected limbs, and assessment tools. Critical gaps were identified, including the lack of wrist/elbow evaluation, underrepresentation of female miners, and absence of AI-based assessment systems. Four key challenges are proposed for future research, including developing deep learning-based ergonomic assessment tools and implementing real-time monitoring systems.
- Open Access
- 17 August 2026
- Published by MDPI AG in Inventions
- Vol. 11 (4) , 85
Intelligent Error Compensation in Copper Concentrate Belt Conveyors Using LSTM Recurrent Neural Networks for Sustainable Mining Operations
This study presents the development and validation of an intelligent error compensator based on Long Short-Term Memory (LSTM) recurrent neural networks for dynamic weighing systems in copper concentrate belt conveyors. Conventional weighing systems fail to capture nonlinear temporal dynamics, leading to measurement inaccuracies during container filling operations. The methodology comprised data acquisition from load cells, speed sensors, and inclinometers; systematic hyperparameter optimization; and evaluation using Mean Absolute Percentage Error (MAPE), Root Mean Square Error (RMSE), and coefficient of determination (R2). Hyperparameter optimization identified an optimal configuration with one LSTM layer (20 units, learning rate 0.001, window size 20 steps). Evaluation on an independent test set showed that the compensator reduced MAPE from 8.5% (uncompensated system) to 3.01%, representing a 64.6% improvement, and reduced RMSE from 12.3 to 4.2 tons (65.9% improvement), with an R2 of 0.95. Feature importance analysis confirmed physical consistency, with load cell voltage as the dominant predictor (42%). These results demonstrate that LSTM-based compensation significantly enhances weighing accuracy. The study provides a replicable framework for industrial metrology modernization, contributing to sustainable mining operations through material loss reduction and logistics optimization. While the proposed model has been validated offline using historical data, its deployment in the live production environment remains pending.
- 17 August 2026
- Published by MDPI AG in Inventions
- Vol. 11 (4) , 85
Open AccessIntelligent Error Compensation in Copper Concentrate Belt Conveyors Using LSTM Recurrent Neural Networks for Sustainable Mining Operations
This study presents the development and validation of an intelligent error compensator based on Long Short-Term Memory (LSTM) recurrent neural networks for dynamic weighing systems in copper concentrate belt conveyors. Conventional weighing systems fail to capture nonlinear temporal dynamics, leading to measurement inaccuracies during container filling operations. The methodology comprised data acquisition from load cells, speed sensors, and inclinometers; systematic hyperparameter optimization; and evaluation using Mean Absolute Percentage Error (MAPE), Root Mean Square Error (RMSE), and coefficient of determination (R2). Hyperparameter optimization identified an optimal configuration with one LSTM layer (20 units, learning rate 0.001, window size 20 steps). Evaluation on an independent test set showed that the compensator reduced MAPE from 8.5% (uncompensated system) to 3.01%, representing a 64.6% improvement, and reduced RMSE from 12.3 to 4.2 tons (65.9% improvement), with an R2 of 0.95. Feature importance analysis confirmed physical consistency, with load cell voltage as the dominant predictor (42%). These results demonstrate that LSTM-based compensation significantly enhances weighing accuracy. The study provides a replicable framework for industrial metrology modernization, contributing to sustainable mining operations through material loss reduction and logistics optimization. While the proposed model has been validated offline using historical data, its deployment in the live production environment remains pending.
- Open Access
Machine Learning-Based Oil Analysis for Underground Mining Equipment
Predictive maintenance in underground mining faces challenges due to severe conditions such as confined environments, high humidity, presence of silica dust, and restricted access. This study develops a predictive framework based on oil analysis and machine learning for multiple compartments of mining equipment (engine, hydraulic system, transmission, differential). Samples were processed under ASTM standards, integrating wear metal concentrations (Fe, Cu, Cr, Pb, Al), physicochemical properties (viscosity, TBN, soot), and contaminants (Si, Na). Based on tribology, interpretable ratios were constructed. Three algorithms (Random Forest, Gradient Boosting, and XGBoost) were evaluated using cross-validation. XGBoost achieved the best balance (F1 = 0.852, AUC = 0.975), with a recall of 94.5% for the critical class and only 3 false negatives out of 199 test samples, while Random Forest presented the highest global discrimination power (AUC = 0.978). SHAP revealed that viscosity at 100 °C is the most important predictor (SHAP ~0.9), surpassing iron. No temporal wear trend was found (R2 = 0.000). Threshold optimization to 0.25 reduced false negatives by 67% (from 9 to 3). The framework provides interpretable predictions with uncertainty quantification for underground environments.
Open AccessMachine Learning-Based Oil Analysis for Underground Mining Equipment
Predictive maintenance in underground mining faces challenges due to severe conditions such as confined environments, high humidity, presence of silica dust, and restricted access. This study develops a predictive framework based on oil analysis and machine learning for multiple compartments of mining equipment (engine, hydraulic system, transmission, differential). Samples were processed under ASTM standards, integrating wear metal concentrations (Fe, Cu, Cr, Pb, Al), physicochemical properties (viscosity, TBN, soot), and contaminants (Si, Na). Based on tribology, interpretable ratios were constructed. Three algorithms (Random Forest, Gradient Boosting, and XGBoost) were evaluated using cross-validation. XGBoost achieved the best balance (F1 = 0.852, AUC = 0.975), with a recall of 94.5% for the critical class and only 3 false negatives out of 199 test samples, while Random Forest presented the highest global discrimination power (AUC = 0.978). SHAP revealed that viscosity at 100 °C is the most important predictor (SHAP ~0.9), surpassing iron. No temporal wear trend was found (R2 = 0.000). Threshold optimization to 0.25 reduced false negatives by 67% (from 9 to 3). The framework provides interpretable predictions with uncertainty quantification for underground environments.
- Open Access
A Prescriptive Maintenance Framework for Textile Machinery Enabled by Hybrid Machine Learning and Multi-Objective Optimization
The textile industry faces machinery maintenance challenges due to reactive practices, lack of real-time monitoring, and absent integrated management systems, resulting in unplanned downtime, elevated costs, and quality variability. This study addresses these limitations by proposing a hybrid predictive–prescriptive framework integrating XGBoost 3.2.0 and LSTM models with a multi-objective optimization engine to generate data-driven maintenance recommendations. The framework was validated on four critical components, needles, hooks, needle guides, and thread tensioners, using operational data from a textile plant (November 2024–January 2026). Plant-wide Mean Time Between Failures increased by 38% (15–21 to 24–28 h), while Mean Time To Repair decreased by 15% (5.31 to 4.6 h). These improvements yielded 5.5% lower maintenance costs, 9% less fabric waste, and reduced cost per operating hour from $25 to $23.5. The prescriptive module transformed imperfect predictions into robust decisions by evaluating interventions against production constraints, spare parts availability, and risk criteria. Beyond quantitative gains, the framework enabled sustainable practices including data-driven spare parts policies and condition-based inspections. This work demonstrates that integrating prediction with prescription effectively overcomes structural maintenance challenges in textile manufacturing, providing a replicable methodology for broader industrial adoption.
Open AccessA Prescriptive Maintenance Framework for Textile Machinery Enabled by Hybrid Machine Learning and Multi-Objective Optimization
The textile industry faces machinery maintenance challenges due to reactive practices, lack of real-time monitoring, and absent integrated management systems, resulting in unplanned downtime, elevated costs, and quality variability. This study addresses these limitations by proposing a hybrid predictive–prescriptive framework integrating XGBoost 3.2.0 and LSTM models with a multi-objective optimization engine to generate data-driven maintenance recommendations. The framework was validated on four critical components, needles, hooks, needle guides, and thread tensioners, using operational data from a textile plant (November 2024–January 2026). Plant-wide Mean Time Between Failures increased by 38% (15–21 to 24–28 h), while Mean Time To Repair decreased by 15% (5.31 to 4.6 h). These improvements yielded 5.5% lower maintenance costs, 9% less fabric waste, and reduced cost per operating hour from $25 to $23.5. The prescriptive module transformed imperfect predictions into robust decisions by evaluating interventions against production constraints, spare parts availability, and risk criteria. Beyond quantitative gains, the framework enabled sustainable practices including data-driven spare parts policies and condition-based inspections. This work demonstrates that integrating prediction with prescription effectively overcomes structural maintenance challenges in textile manufacturing, providing a replicable methodology for broader industrial adoption.
- Open Access
Predictive Maintenance in Underground Mining Equipment Using Artificial Intelligence
Underground mining faces unique challenges in equipment maintenance due to extreme operating conditions and intensive use, which limit the effectiveness of traditional methods. This study proposes a predictive maintenance (PdM) framework based on artificial intelligence (AI) to optimize efficiency and reduce costs, focusing on early fault detection. The methodology integrates IoT sensors to monitor key parameters (temperature, pressure, oil analysis, and wear) in real time, combined with machine learning models to identify predictive patterns. The results demonstrate an 8% reduction in maintenance costs and a 10% increase in equipment availability, validating the system’s ability to anticipate failures and minimize unplanned downtime. It is concluded that this approach not only enhances productivity but also raises safety standards, offering a scalable model for critical industrial environments. The findings are supported by empirical data collected from actual operations, with no theoretical extrapolations.
Open AccessPredictive Maintenance in Underground Mining Equipment Using Artificial Intelligence
Underground mining faces unique challenges in equipment maintenance due to extreme operating conditions and intensive use, which limit the effectiveness of traditional methods. This study proposes a predictive maintenance (PdM) framework based on artificial intelligence (AI) to optimize efficiency and reduce costs, focusing on early fault detection. The methodology integrates IoT sensors to monitor key parameters (temperature, pressure, oil analysis, and wear) in real time, combined with machine learning models to identify predictive patterns. The results demonstrate an 8% reduction in maintenance costs and a 10% increase in equipment availability, validating the system’s ability to anticipate failures and minimize unplanned downtime. It is concluded that this approach not only enhances productivity but also raises safety standards, offering a scalable model for critical industrial environments. The findings are supported by empirical data collected from actual operations, with no theoretical extrapolations.