Anhua Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anhua Xu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Bowen Guan
School of Materials Science and Engineering, Chang’an University, Xi’an, People’s Republic of China
4 shared publications - Yindong Xu
School of Water Resources and Civil Engineering, Qinghai Polytechnic University, Xining 810016, China
2 shared publications - Jiahong Li
School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China
1 shared publication Laifa Wang
Qinghai Provincial Communications Control Construction Engineering Group Co., Ltd., Xining, People’s Republic of China
1 shared publicationShijie Gao
School of Materials Science and Engineering, Chang’an University, Xi’an, People’s Republic of China
1 shared publication- Tengyu Zhu
School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China
1 shared publication
Latest Publications
- Open Access
Synergistic Valorization of Ternary Industrial Solid Wastes for Sustainable Loess Stabilization: Mix Optimization, Strength Evolution, and Microstructural Mechanisms
This study investigates the mechanical properties and strength formation mechanism of loess solidified with a ternary blend of fly ash, lithium slag, and magnesium slag. The mix proportion was optimized using response surface methodology with a Box–Behnken design. Unconfined compressive strength (UCS) tests, digital image correlation (DIC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed for evaluation. The optimal 7-day mix (15.926 wt.% fly ash, 10.158 wt.% lithium slag, and 6.427 wt.% magnesium slag) achieved a UCS of 0.974 MPa, while the 28-day optimum (16.064 wt.% fly ash, 10 wt.% lithium slag, and 2 wt.% magnesium slag) yielded 1.834 MPa. Strength development followed a quadratic nonlinear model at early age, shifting to a linear superposition model at 28 days. XRD and SEM revealed that strength enhancement originates from synergistic pozzolanic and hydration reactions under alkaline activation, producing C-S-H gel and ettringite (AFt) that fill pores and cement soil particles. The ternary system demonstrates effective utilization of industrial solid wastes for loess stabilization.
Open AccessSynergistic Valorization of Ternary Industrial Solid Wastes for Sustainable Loess Stabilization: Mix Optimization, Strength Evolution, and Microstructural Mechanisms
This study investigates the mechanical properties and strength formation mechanism of loess solidified with a ternary blend of fly ash, lithium slag, and magnesium slag. The mix proportion was optimized using response surface methodology with a Box–Behnken design. Unconfined compressive strength (UCS) tests, digital image correlation (DIC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were employed for evaluation. The optimal 7-day mix (15.926 wt.% fly ash, 10.158 wt.% lithium slag, and 6.427 wt.% magnesium slag) achieved a UCS of 0.974 MPa, while the 28-day optimum (16.064 wt.% fly ash, 10 wt.% lithium slag, and 2 wt.% magnesium slag) yielded 1.834 MPa. Strength development followed a quadratic nonlinear model at early age, shifting to a linear superposition model at 28 days. XRD and SEM revealed that strength enhancement originates from synergistic pozzolanic and hydration reactions under alkaline activation, producing C-S-H gel and ettringite (AFt) that fill pores and cement soil particles. The ternary system demonstrates effective utilization of industrial solid wastes for loess stabilization.
- Open Access
Rapid Abrasion-Resistance Prediction of Recycled Aggregates Using Improved Whale Optimization-Tuned Gaussian Process Regression and SHAP Analysis
High Friction Surface Treatment (HFST) relies heavily on wear-resistant aggregates to ensure roadway safety, yet the conventional evaluation of aggregate abrasion resistance is time-consuming and resource-intensive. In this study, a machine learning framework was developed to predict the abrasion-induced angularity evolution of recycled high-alumina aggregates from their initial morphological characteristics, thereby enabling rapid abrasion-resistance screening. Six regression models were compared under leave-one-group-out cross-validation, and an improved whale optimization algorithm (IWOA) was proposed to tune the Gaussian process regression (GPR) model, incorporating five enhancements and a regularized fitness function to restrain overfitting. The models were trained on 42 samples from six aggregates, whose angularity, Form 2D, micro-texture, sphericity, and F:E ratio were measured with the AIMS II device before and after successive abrasion cycles. The IWOA-GPR model achieved the best performance, with an R2 of 0.8909, an RMSE of 150.98, an MAE of 120.55, and a MAPE of 4.60%. The SHAP analysis identified the abrasion revolutions, the initial Form 2D, and the initial angularity as the dominant contributors to the worn angularity. Moreover, the early angularity loss after the first 500 revolutions correlated strongly with the measured Los Angeles abrasion value (r = 0.935), which allows the LAA of a candidate aggregate to be estimated after a single abrasion cycle. The proposed framework therefore provides a rapid and reliable tool for screening wear-resistant aggregates for HFST applications and supports the clean utilization of recycled solid wastes in anti-skid pavements.
Open AccessRapid Abrasion-Resistance Prediction of Recycled Aggregates Using Improved Whale Optimization-Tuned Gaussian Process Regression and SHAP Analysis
High Friction Surface Treatment (HFST) relies heavily on wear-resistant aggregates to ensure roadway safety, yet the conventional evaluation of aggregate abrasion resistance is time-consuming and resource-intensive. In this study, a machine learning framework was developed to predict the abrasion-induced angularity evolution of recycled high-alumina aggregates from their initial morphological characteristics, thereby enabling rapid abrasion-resistance screening. Six regression models were compared under leave-one-group-out cross-validation, and an improved whale optimization algorithm (IWOA) was proposed to tune the Gaussian process regression (GPR) model, incorporating five enhancements and a regularized fitness function to restrain overfitting. The models were trained on 42 samples from six aggregates, whose angularity, Form 2D, micro-texture, sphericity, and F:E ratio were measured with the AIMS II device before and after successive abrasion cycles. The IWOA-GPR model achieved the best performance, with an R2 of 0.8909, an RMSE of 150.98, an MAE of 120.55, and a MAPE of 4.60%. The SHAP analysis identified the abrasion revolutions, the initial Form 2D, and the initial angularity as the dominant contributors to the worn angularity. Moreover, the early angularity loss after the first 500 revolutions correlated strongly with the measured Los Angeles abrasion value (r = 0.935), which allows the LAA of a candidate aggregate to be estimated after a single abrasion cycle. The proposed framework therefore provides a rapid and reliable tool for screening wear-resistant aggregates for HFST applications and supports the clean utilization of recycled solid wastes in anti-skid pavements.
- Open Access
Effects of Aged Conditions on the Self-Healing Performance of Asphalt Mixtures: A Comparative Study of Long-Term and Short-Term Aging
This study investigates how short- and long-term aging affect the microwave self-healing of steel slag asphalt mixtures (SSAMs). Binder-level healing was tested using a dynamic shear rheometer (DSR), and mixture-level crack behavior was analyzed using beam bending tests (BBTs) and digital image correlation (DIC). Aging clearly reduced self-healing, with long-term aging causing the largest decline. Among the mixtures, OGFC-13 was most sensitive, while SMA-13 was least affected. Aging increased stiffness, reduced crack resistance, and shortened crack initiation time, leading to lower healing efficiency under microwave treatment. After heating, cracks propagated faster, indicating increased brittleness. These results quantify the impact of aging on performance and highlight the limitations of microwave repair, providing guidance for maintenance strategies and mixture design to improve long-term pavement performance.
Open AccessEffects of Aged Conditions on the Self-Healing Performance of Asphalt Mixtures: A Comparative Study of Long-Term and Short-Term Aging
This study investigates how short- and long-term aging affect the microwave self-healing of steel slag asphalt mixtures (SSAMs). Binder-level healing was tested using a dynamic shear rheometer (DSR), and mixture-level crack behavior was analyzed using beam bending tests (BBTs) and digital image correlation (DIC). Aging clearly reduced self-healing, with long-term aging causing the largest decline. Among the mixtures, OGFC-13 was most sensitive, while SMA-13 was least affected. Aging increased stiffness, reduced crack resistance, and shortened crack initiation time, leading to lower healing efficiency under microwave treatment. After heating, cracks propagated faster, indicating increased brittleness. These results quantify the impact of aging on performance and highlight the limitations of microwave repair, providing guidance for maintenance strategies and mixture design to improve long-term pavement performance.