VKViktor Kovalenko

Viktor Kovalenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Viktor Kovalenko has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Power Quality Enhancement in Rolling Mill Power Supply Networks Using Controlled Reactor Compensation

    by Arailym Smail, Alibek Batyrbek, Karshiga Smagulova, Zoya Gelmanova, Zukhra Bayassilova, Viktor Kovalenko, Oleksii Bilous

    The article is aimed at studying the features of the hot rolling mill CWBRM-1700 of JSC “Qarmet”, which negatively affect the operation of the distribution network of the workshop. Such factors are frequent shock loads of technological mechanisms with high installed capacity of the equipment. Experimental studies of the distribution network of the rolling production on the buses of the 10 kV substation showed that shock loads of synchronous electric drives of roughing stands lead to periodic voltage drops of up to 13% lasting 5–6 s. Mathematical modeling in the MATLAB/Simscape/Electrical environment, the results of which coincide with the data of the experimental study, showed that the most significant factor affecting the quality of electricity are abrupt changes in the reactive power of the synchronous motor from −0.5 to +0.5 MVAR. To solve the problem, it is proposed to use a controlled filter-compensating device. Variants of circuit solutions for such devices are considered. The choice was made in favor of a three-phase adjustable LLC filter with diode–transistor keys. The article develops a method for calculating the electromagnetic parameters of such a filter and establishes that in order to reduce the level of harmonic distortion of voltage, it is necessary to use a triangle connection of the controlled reactive compensator and select the PWM frequency of the transistors, a multiple of the tripled frequency of the power grid. Two options for creating a closed-loop control system for energy modes are studied: a reactive power stabilization system and a voltage stabilization system in a distribution network node, which reduce the duration of transient processes to 0.5 s and reduce the voltage drop in the network node to −4 to + 1% in the first case and to −4 to + 3% in the second, also reducing reactive power consumption to 0.02 MVAR and 0.25 MVAR, respectively. The advantage of a closed-loop control system with voltage stabilization is the ability to use a technically less complex voltage sensor.

  • Open Access

    Fractional PI-PIμD Controllers with Neural Network Adaptation in Control System of BLDC Motor Electric Drives

    by Victor Busher, Valeriy Kuznetsov, Viktor Kovalenko, Mykola Babyak, Valeriy Druzhinin, Valerii Tytiuk, Artur Rojek, Kateryna Klochko, Ievgen Gurin, Yurii Shramko

    This paper investigates, for the first time, the synthesis of a controller that incorporates a fractional-order integral component to achieve a closed-loop astaticism order greater than one. To enhance both static and dynamic accuracy, the controller integrates direct-signal-propagation neural networks within each control channel. The controlled plant is the BLDCM speed loop, which is modeled using a fractional-order differential equation. The study compares the performance of four controller types: a classical PID regulator tuned close to the optimal modulus criterion (IntPID); a fractional PI–PIμD controller (FrPID) that achieves an astaticism order of at least 1.8; and two hybrid neuro-controllers, NN–IntPID and NN–FrPID. While the FrPID controller reduces the root-mean-square error by nearly a factor of five compared with IntPID, the best results are delivered by NN–FrPID. Specifically, it decreases overshoot eight-fold during a reference step (from 2.98% to 0.35%), lowers the root-mean-square error during linear reference tracking by a factor of eleven, and reduces the relative speed error by more than thirty-five times. When combined with a fast learning algorithm executed at each control-cycle iteration, the controller enables the closed loop to adapt not only to variations in gain coefficients, but also to changes in the fractional-aperiodic order of the plant. These results demonstrate that neural fractional-integral controllers offer strong potential for improving accuracy and robustness in BLDC motor drives and are applicable to a wide range of electromechanical systems.


  • Open Access

    Control of Drum Shear Electric Drive Using Self-Learning Artificial Neural Networks

    by Alibek Batyrbek, Valeriy Kuznetsov, Vitalii Kuznetsov, Artur Rojek, Viktor Kovalenko, Oleksandr Tkalenko, Valerii Tytiuk, Pavlo Krasovskyi

    The objective of this work was to study the possibility of upgrading the control system of the drum shear mechanism by using neural network PI controllers to improve the efficiency of the sheet-metal cutting process. The developed detailed model of the mechanism, including a dual DC electric drive with three subordinate control loops for the voltage of the thyristor converter, current and speed of the motors, a 6-mass kinematic system with viscoelastic connections as well as a model of the metal cutting process, made it possible to uncover that the interaction of electric drives with the mechanical part leads to significant speed fluctuations during the cutting process, which worsens the quality of the sheet-metal edge. A modified system of current and speed controllers with built-in three-layer fitting neural networks as nonlinear components of proportional-integral channels is proposed. An algorithm for the fast learning of neural controllers using the gradient descent method in each cycle of calculating the controller signal is also proposed. The developed neuro-regulators make it possible to reduce the amplitude of speed fluctuations during the cutting process by four times, ensuring the effective damping of oscillations and reducing the duration of transient processes to 0.1 s.


  • Open Access

    Forecasting the Power Generation of a Solar Power Plant Taking into Account the Statistical Characteristics of Meteorological Conditions

    by Vitalii Kuznetsov, Valeriy Kuznetsov, Zbigniew Ciekanowski, Valeriy Druzhinin, Valerii Tytiuk, Artur Rojek, Tomasz Grudniewski, Viktor Kovalenko

    The integration of solar generation into national energy balances is associated with a wide range of technical, economic, and organizational challenges, the solution of which requires the adoption of innovative strategies for energy system management. The inherent variability of electricity production, driven by fluctuating climatic conditions, complicates system balancing processes and necessitates the reservation of capacities from conventional energy sources to ensure reliability. Under modern market conditions, the pricing of generated electricity is commonly based on day-ahead forecasts of day energy yield, which significantly affects the economic performance of solar power plants. Consequently, achieving high accuracy in day-ahead electricity production forecasting is a critical and highly relevant task. To address this challenge, a physico-statistical model has been developed, in which the analytical approximation of daily electricity generation is represented as a function of a random variable—cloud cover—modeled by a β-distribution. Analytical expressions were derived for calculating the mathematical expectation and variance of daily electricity generation as functions of the β-distribution parameters of cloudiness. The analytical approximation of daily generation deviates from the exact value, obtained through hourly integration, by an average of 3.9%. The relative forecasting error of electricity production, when using the mathematical expectation of cloudiness compared to the analytical approximation of daily generation, reaches 15.2%. The proposed forecasting method, based on a β-parametric cloudiness model, enhances the accuracy of day-ahead production forecasts, improves the economic efficiency of solar power plants, and contributes to strengthening the stability and reliability of power systems with a substantial share of solar generation.