Zhendong Shao
Research Subjects
Zhendong Shao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Aqing Li
Key Laboratory of Advanced Perception and Intelligent Control of High-End Equipment, Ministry of Education, Anhui Polytechnic University, Wuhu 241000, China
3 shared publications - Peng Zhou
School of Electrical Engineering, Anhui Polytechnic University, Wuhu 241000, China
3 shared publications - Penghao Cui
Key Laboratory of Advanced Perception and Intelligent Control of High-End Equipment, Ministry of Education, Anhui Polytechnic University, Wuhu 241000, China
3 shared publications Guochen Bian
Anhui Green Energy Technology Institute Co., Ltd., Hefei 230061, China
2 shared publications- Lei Yang
Laboratory of Marine Information Science and Technology, School of Computer Science and Engineering, Southeast University, Nanjing 210096, China, China
2 shared publications - Yifei Cao
Key Laboratory of Advanced Perception and Intelligent Control of High-End Equipment, Ministry of Education, Anhui Polytechnic University, Wuhu 241000, China
2 shared publications
Latest Publications
- Open Access
Rapid Estimation for the Maximum Remaining Capacity of Retired Lithium-Ion Batteries Based on CNN-CBAM-LSTM
With the continuous increase in the number of Retired Lithium-Ion Batteries (RLBs), accurately estimating their Maximum Remaining Capacity (MRC) has become a key challenge for rapid sorting and secondary utilization. Conventional detection methods often suffer from low efficiency and limited scalability for large-scale applications. To address these issues, this paper presents a rapid MRC estimation method using a hybrid Convolutional Neural Network (CNN), Conv Block Attention Module (CBAM), and Long Short-Term Memory (LSTM) architecture. The proposed approach extracts key voltage and capacity features from only the initial 30 min charging phase, integrating both factory and laboratory data. Specifically, the CNN captures local temporal patterns, the LSTM models long-term dependencies, and the CBAM adaptively emphasizes critical characteristics. Experimental results demonstrate that the proposed method significantly outperforms traditional approaches, achieving a testing R2 of 98.05% and a Mean Absolute Percentage Error (MAPE) of 1.60%. These results highlight the superior performance of the proposed framework, exhibiting strong potential for high-throughput battery sorting and large-scale health monitoring systems.
Open AccessRapid Estimation for the Maximum Remaining Capacity of Retired Lithium-Ion Batteries Based on CNN-CBAM-LSTM
With the continuous increase in the number of Retired Lithium-Ion Batteries (RLBs), accurately estimating their Maximum Remaining Capacity (MRC) has become a key challenge for rapid sorting and secondary utilization. Conventional detection methods often suffer from low efficiency and limited scalability for large-scale applications. To address these issues, this paper presents a rapid MRC estimation method using a hybrid Convolutional Neural Network (CNN), Conv Block Attention Module (CBAM), and Long Short-Term Memory (LSTM) architecture. The proposed approach extracts key voltage and capacity features from only the initial 30 min charging phase, integrating both factory and laboratory data. Specifically, the CNN captures local temporal patterns, the LSTM models long-term dependencies, and the CBAM adaptively emphasizes critical characteristics. Experimental results demonstrate that the proposed method significantly outperforms traditional approaches, achieving a testing R2 of 98.05% and a Mean Absolute Percentage Error (MAPE) of 1.60%. These results highlight the superior performance of the proposed framework, exhibiting strong potential for high-throughput battery sorting and large-scale health monitoring systems.
- Open Access
- 2 March 2026
- Published by MDPI AG in Preprints.org
Rapid Estimation for the Maximum Remaining Capacity of Retired Lithium-Ion Batteries Based on CNN-CBAM-LSTM
With the continuous increase in the number of retired lithium-ion batteries, accurately and quickly estimating their MRC has become a key challenge for the rapid sorting and secondary utilization of retired lithium-ion batteries. Conventional detection methods often suffer from low efficiency, prolonged detection cycles, and limited scalability for large-scale applications. To address these issues, this paper presents a fast MRC estimation method for retired lithium-ion batteries using a hybrid Convolutional Neural Network (CNN)-Conv Block Attention Module (CBAM)-Long Short-Term Memory (LSTM) architecture (CNN-CBAM-LSTM). The proposed approach integrates both factory-scale test data and laboratory experimental data to extract key voltage and capacity features from the initial 30-minute charging phase. Specifically, the CNN captures local temporal patterns, the LSTM models long-term dependencies in the time-series data, and the CBAM enhances feature representation by emphasizing critical characteristics. Experimental results demonstrate that the proposed method achieves MRC estimation within 30 minutes, significantly outperforming traditional approaches in terms of accuracy. The R² value increased to 99.42%, while the MAPE decreased to 1.55%. These results highlight the superior performance of the proposed method, which not only holds strong potential for rapid battery sorting and cascaded utilization but also exhibits broad applicability in large-scale battery health monitoring systems.
- 2 March 2026
- Published by MDPI AG in Preprints.org
Open AccessRapid Estimation for the Maximum Remaining Capacity of Retired Lithium-Ion Batteries Based on CNN-CBAM-LSTM
With the continuous increase in the number of retired lithium-ion batteries, accurately and quickly estimating their MRC has become a key challenge for the rapid sorting and secondary utilization of retired lithium-ion batteries. Conventional detection methods often suffer from low efficiency, prolonged detection cycles, and limited scalability for large-scale applications. To address these issues, this paper presents a fast MRC estimation method for retired lithium-ion batteries using a hybrid Convolutional Neural Network (CNN)-Conv Block Attention Module (CBAM)-Long Short-Term Memory (LSTM) architecture (CNN-CBAM-LSTM). The proposed approach integrates both factory-scale test data and laboratory experimental data to extract key voltage and capacity features from the initial 30-minute charging phase. Specifically, the CNN captures local temporal patterns, the LSTM models long-term dependencies in the time-series data, and the CBAM enhances feature representation by emphasizing critical characteristics. Experimental results demonstrate that the proposed method achieves MRC estimation within 30 minutes, significantly outperforming traditional approaches in terms of accuracy. The R² value increased to 99.42%, while the MAPE decreased to 1.55%. These results highlight the superior performance of the proposed method, which not only holds strong potential for rapid battery sorting and cascaded utilization but also exhibits broad applicability in large-scale battery health monitoring systems.
- Open Access
Rapid Prediction of Maximum Remaining Capacity in Lithium-Ion Batteries Based on Charging Segment Features and GA_DBO_BPNN
Rapid and accurate prediction of the maximum remaining life of lithium-ion batteries is a critical technical challenge for enhancing battery management system reliability and enabling the efficient secondary utilization of retired batteries. Traditional approaches that rely on full charge–discharge cycles or complex electrochemical models often suffer from long detection time and limited adaptability, making them unsuitable for fast testing scenarios. To address these limitations, this study proposes a novel capacity prediction method that integrates charging segment feature extraction with a back-propagation neural network (BPNN) co-optimized using the genetic algorithm (GA) and dung beetle optimizer (DBO). Leveraging the public CALCE datasets, key degradation-related features were extracted from partial charging segments to serve as inputs to the prediction framework. The hybrid GA_DBO algorithm is employed to jointly optimize the BPNN’s weights, learning rate, and activation thresholds. A comparative analysis is conducted across various charging durations (900 s, 1800 s, and 2700 s) to evaluate performance under different input lengths. Results reveal that the model using 1800 s charging segment features achieves the best overall accuracy, with a test set mean squared error (MSE) of 0.0001 Ah2, mean absolute error (MAE) of 0.0092 Ah, root mean square error (RMSE) of 0.0122 Ah, and a coefficient of determination (R2) of 99.66%, demonstrating strong robustness and predictive capability. This research overcomes the traditional reliance on full cycles, demonstrating the effectiveness of short charging segments combined with intelligent optimization algorithms. The proposed method offers a high-precision, low-cost solution for online battery health monitoring and rapid sorting of retired batteries, highlighting its significant engineering application potential.
Open AccessRapid Prediction of Maximum Remaining Capacity in Lithium-Ion Batteries Based on Charging Segment Features and GA_DBO_BPNN
Rapid and accurate prediction of the maximum remaining life of lithium-ion batteries is a critical technical challenge for enhancing battery management system reliability and enabling the efficient secondary utilization of retired batteries. Traditional approaches that rely on full charge–discharge cycles or complex electrochemical models often suffer from long detection time and limited adaptability, making them unsuitable for fast testing scenarios. To address these limitations, this study proposes a novel capacity prediction method that integrates charging segment feature extraction with a back-propagation neural network (BPNN) co-optimized using the genetic algorithm (GA) and dung beetle optimizer (DBO). Leveraging the public CALCE datasets, key degradation-related features were extracted from partial charging segments to serve as inputs to the prediction framework. The hybrid GA_DBO algorithm is employed to jointly optimize the BPNN’s weights, learning rate, and activation thresholds. A comparative analysis is conducted across various charging durations (900 s, 1800 s, and 2700 s) to evaluate performance under different input lengths. Results reveal that the model using 1800 s charging segment features achieves the best overall accuracy, with a test set mean squared error (MSE) of 0.0001 Ah2, mean absolute error (MAE) of 0.0092 Ah, root mean square error (RMSE) of 0.0122 Ah, and a coefficient of determination (R2) of 99.66%, demonstrating strong robustness and predictive capability. This research overcomes the traditional reliance on full cycles, demonstrating the effectiveness of short charging segments combined with intelligent optimization algorithms. The proposed method offers a high-precision, low-cost solution for online battery health monitoring and rapid sorting of retired batteries, highlighting its significant engineering application potential.