Dimitar Tsvetanov
Dimitar Tsvetanov has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Nikolay Djagarov
Electrical Department, Nikola Vaptsarov Naval Academy, Address: 73 Vasil Drumev str., Varna, BULGARIA
20 shared publicationsJulia Djagarova
Nikola Vaptsarov Naval Academy,Electrical Department,Varna,Bulgaria
14 shared publicationsZhivko Grozdev
Nikola Vaptsarov Naval Academy,Electrical Department,Varna,Bulgaria
11 shared publicationsHristo Milushev
Naval Academy,Nikola Vaptsarov,Electrical Department,Varna,Bulgaria
6 shared publications- Nikolay Djagarov
Nikola Vaptsarov Naval Academy, Varna, Bulgaria
4 shared publications - Zhivko Grozdev
Electrical Department, Nikola Vaptsarov Naval Academy, Varna, 9026, Bulgaria
4 shared publications
Latest Publications
- 27 January 2026
- Published by Taylor & Francis in Journal of Marine Engineering & Technology
- Vol. 25 (2) , 235-256
Supraharmonics in shipboard power systems: research gaps, challenges, and future directions
- 27 January 2026
- Published by Taylor & Francis in Journal of Marine Engineering & Technology
- Vol. 25 (2) , 235-256
Supraharmonics in shipboard power systems: research gaps, challenges, and future directions
- 25 November 2025
- Published by World Scientific and Engineering Academy and Society (WSEAS) in WSEAS TRANSACTIONS ON POWER SYSTEMS
- Vol. 20, 358-368
Modelling of Short-Circuit Processes in Ship Power Systems
The study of short-circuit processes in ship power systems (SPS) is a necessary stage in their design. It is regulated by the requirements of ship registers, and the results of the study are used to examine the stability of SPS operation and to check the protection of ship electrical equipment. The article presents a software system implemented in the MATLAB environment, which allows modelling and simulation of transient processes in such systems. Short circuits were simulated in different places of the examined system, and part of the experimental results obtained are presented.
- 25 November 2025
- Published by World Scientific and Engineering Academy and Society (WSEAS) in WSEAS TRANSACTIONS ON POWER SYSTEMS
- Vol. 20, 358-368
Modelling of Short-Circuit Processes in Ship Power Systems
The study of short-circuit processes in ship power systems (SPS) is a necessary stage in their design. It is regulated by the requirements of ship registers, and the results of the study are used to examine the stability of SPS operation and to check the protection of ship electrical equipment. The article presents a software system implemented in the MATLAB environment, which allows modelling and simulation of transient processes in such systems. Short circuits were simulated in different places of the examined system, and part of the experimental results obtained are presented.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Braking Mode Investigation of Switched Reluctance EV Traction Motor Drive
Switched reluctance motors (SRM) occupy a significant share of the traction electric motors used in electric vehicles (EVs). The braking modes of EVs are very important for their efficient operation. Using a mathematical model, the braking modes of EVs with traction SRM drives have been studied.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Braking Mode Investigation of Switched Reluctance EV Traction Motor Drive
Switched reluctance motors (SRM) occupy a significant share of the traction electric motors used in electric vehicles (EVs). The braking modes of EVs are very important for their efficient operation. Using a mathematical model, the braking modes of EVs with traction SRM drives have been studied.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Modeling of Adaptive Control of Switched Reluctance EV Traction Motor Drive
Adaptive control of an automotive traction electric drive is proposed. A mathematical model of this drive has been created. Using the model, the drive's operating modes have been studied.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Modeling of Adaptive Control of Switched Reluctance EV Traction Motor Drive
Adaptive control of an automotive traction electric drive is proposed. A mathematical model of this drive has been created. Using the model, the drive's operating modes have been studied.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Optimization of Bagging Classifier for Diagnosis of Marine Electric Drives
The integration of Artificial Intelligence and its use to improve various aspects are one of the basic goals of modern industry. Such an industry is shipping. This article will examine the use of a machine learning classifier, namely Bagging classifier, to reduce, predict and diagnose defects in ship electric drives. For this purpose, a mathematical model of a ship power plant with limited energy production and a flexible model of an electric motor has been built, in which various defects can be simulated. The results of these simulations are used to train AI. An algorithm has been developed to optimize the performance of various popular classifiers, including the Bagging Classifier, and the achieved optimization results are analyzed from the point of view of accuracy and training time.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Optimization of Bagging Classifier for Diagnosis of Marine Electric Drives
The integration of Artificial Intelligence and its use to improve various aspects are one of the basic goals of modern industry. Such an industry is shipping. This article will examine the use of a machine learning classifier, namely Bagging classifier, to reduce, predict and diagnose defects in ship electric drives. For this purpose, a mathematical model of a ship power plant with limited energy production and a flexible model of an electric motor has been built, in which various defects can be simulated. The results of these simulations are used to train AI. An algorithm has been developed to optimize the performance of various popular classifiers, including the Bagging Classifier, and the achieved optimization results are analyzed from the point of view of accuracy and training time.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Study of Low-Frequency Electromagnetic Field in Specific Areas of a Car Carrier Vessel with 6.6 kV Propulsion System
The growing adoption of electric propulsion systems in maritime vessels, such as Ro-Ro car carriers, has led to increased use of high-voltage electrical equipment, typically operating at 6.6 kV or higher. These systems inherently generate low-frequency electromagnetic fields (EMFs), which can pose occupational health risks to personnel, particularly in confined shipboard environments such as engine rooms and technical compartments where electrical components are densely installed. This study investigates the spatial and operational distribution of low-frequency EMFs aboard a Ro-Ro car carrier equipped with a 6.6 kV electric propulsion system. EMF measurements were conducted under two load conditionsduring harbor maneuvering and open-sea operations-to assess potential exposure levels. The study investigates possible risk areas, evaluates exposure against established health standards, and recommends mitigation strategies including EMF monitoring, shielding, safety zoning, and crew training. The findings aim to support improved occupational health and safety practices in the maritime sector by providing data-driven insights into EMF exposure aboard electrically propelled vessels.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Study of Low-Frequency Electromagnetic Field in Specific Areas of a Car Carrier Vessel with 6.6 kV Propulsion System
The growing adoption of electric propulsion systems in maritime vessels, such as Ro-Ro car carriers, has led to increased use of high-voltage electrical equipment, typically operating at 6.6 kV or higher. These systems inherently generate low-frequency electromagnetic fields (EMFs), which can pose occupational health risks to personnel, particularly in confined shipboard environments such as engine rooms and technical compartments where electrical components are densely installed. This study investigates the spatial and operational distribution of low-frequency EMFs aboard a Ro-Ro car carrier equipped with a 6.6 kV electric propulsion system. EMF measurements were conducted under two load conditionsduring harbor maneuvering and open-sea operations-to assess potential exposure levels. The study investigates possible risk areas, evaluates exposure against established health standards, and recommends mitigation strategies including EMF monitoring, shielding, safety zoning, and crew training. The findings aim to support improved occupational health and safety practices in the maritime sector by providing data-driven insights into EMF exposure aboard electrically propelled vessels.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Low Cost Shipboard Voltage Monitoring Using a Raspberry Pi-Based Data Acquisition System
This paper presents a low-cost voltage monitoring system developed for laboratory-based shipboard power system simulation is designed and validated. The system integrates an MCC 128 module for signal acquisition, a Raspberry Pi for the central processing unit, and a custom LEM-based voltage transducer PCB for precise voltage measurements. The system is evaluated in simulated shipboard scenarios involving harmonic distortion, transient events, and steady-state operation. The proposed setup presents measurement accuracy and performance comparable to a reference-grade instrument, based on experimental results. The results show that it is acceptable to implement flexible, low-cost monitoring solutions for evaluating power quality in maritime environments.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Low Cost Shipboard Voltage Monitoring Using a Raspberry Pi-Based Data Acquisition System
This paper presents a low-cost voltage monitoring system developed for laboratory-based shipboard power system simulation is designed and validated. The system integrates an MCC 128 module for signal acquisition, a Raspberry Pi for the central processing unit, and a custom LEM-based voltage transducer PCB for precise voltage measurements. The system is evaluated in simulated shipboard scenarios involving harmonic distortion, transient events, and steady-state operation. The proposed setup presents measurement accuracy and performance comparable to a reference-grade instrument, based on experimental results. The results show that it is acceptable to implement flexible, low-cost monitoring solutions for evaluating power quality in maritime environments.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 88-94
Study of Operating Modes of a Synchronous Motor without Damper Winding
Modern ship electric propulsion uses synchronous motors without a damping winding. The absence of a damping winding greatly affects the characteristics and control of electric propulsion. In the article, a model of a synchronous motor without a damping winding is proposed. Different normal and emergency modes of operation are simulated using the model. Different electric propulsion control approaches were used in the study.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 88-94
Study of Operating Modes of a Synchronous Motor without Damper Winding
Modern ship electric propulsion uses synchronous motors without a damping winding. The absence of a damping winding greatly affects the characteristics and control of electric propulsion. In the article, a model of a synchronous motor without a damping winding is proposed. Different normal and emergency modes of operation are simulated using the model. Different electric propulsion control approaches were used in the study.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 82-87
Study of the Processes in Double Star Ship’s Synchronous Propulsion Motor
More and more ships use electric propulsion. High drive power has led to the use of polyphase AC motors, which improves drive performance and increased fault tolerance. Using the authors' mathematical model, various transient modes of operation were simulated. Some of the results obtained as a result of the simulations are shown and discussed.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 82-87
Study of the Processes in Double Star Ship’s Synchronous Propulsion Motor
More and more ships use electric propulsion. High drive power has led to the use of polyphase AC motors, which improves drive performance and increased fault tolerance. Using the authors' mathematical model, various transient modes of operation were simulated. Some of the results obtained as a result of the simulations are shown and discussed.
- 27 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Analysis of Synchronization Process of Synchronous Generators in Shipboard Power Systems: A Laboratory Study
This study investigates the automated synchronization and desynchronization processes of synchronous generators (SGs) in a controlled laboratory environment, intending to replicate power systems seen aboard ships. The goal of this paper is to provide insight into the challenges of maintaining electrical stability and efficiency in maritime power situations by examining the integration and separation of a synchronous generator (SG) with a busbar system. Through the experimental analysis, we recorded changes in voltage and current during these operations, which allowed us to thoroughly examine the operational dynamics and identify potential issues. The research shows that synchronization is crucial for reducing power disturbances and assuring the dependability of shipboard electrical systems. While automatic synchronization shows promise, our studies reveal areas that need improvement, namely with sensor precision and timing inconsistencies. By providing these data, we enhance the comprehension of how synchronization affects the safety and operational efficiency of maritime vessels, emphasizing the necessity for continuous improvement of shipboard power systems. This paper contributes to the field of electrical engineering by highlighting the importance of improving synchronization techniques for marine applications and other industries that depend on dispersed power systems.
- 27 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Analysis of Synchronization Process of Synchronous Generators in Shipboard Power Systems: A Laboratory Study
This study investigates the automated synchronization and desynchronization processes of synchronous generators (SGs) in a controlled laboratory environment, intending to replicate power systems seen aboard ships. The goal of this paper is to provide insight into the challenges of maintaining electrical stability and efficiency in maritime power situations by examining the integration and separation of a synchronous generator (SG) with a busbar system. Through the experimental analysis, we recorded changes in voltage and current during these operations, which allowed us to thoroughly examine the operational dynamics and identify potential issues. The research shows that synchronization is crucial for reducing power disturbances and assuring the dependability of shipboard electrical systems. While automatic synchronization shows promise, our studies reveal areas that need improvement, namely with sensor precision and timing inconsistencies. By providing these data, we enhance the comprehension of how synchronization affects the safety and operational efficiency of maritime vessels, emphasizing the necessity for continuous improvement of shipboard power systems. This paper contributes to the field of electrical engineering by highlighting the importance of improving synchronization techniques for marine applications and other industries that depend on dispersed power systems.