Yufei Liu
Research Subjects
Yufei Liu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Chenyu Bao3 shared publications
- Hongqiang Lyu
College of Aerospace Engineering
3 shared publications - Xuejun Liu
Nanjing University of Aeronautics and Astronautics
3 shared publications - Jianjian Huang2 shared publications
- Wenxuan Ouyang
College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
2 shared publications Haoyu Ru
1 shared publication
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Unified shock and interface capturing in an adaptive high-order discontinuous Galerkin method for compressible two-phase flows
To improve the robustness and efficiency of high-order discontinuous Galerkin (DG) simulations for compressible two-phase flows, this study develops an adaptive shock capture DG strategy that combines a sub-cell limiter with adaptive mesh refinement (AMR). This work extends the shock capture sub-cell limiter strategy from conventional shock-dominated flows to two-phase interface simulations by treating the material interface as a shock-type numerical discontinuity. In this framework, both shock waves and material interfaces are handled within a unified sub-cell limiter-based and AMR-based DG formulation, so that discontinuous thermodynamic states, steep density gradients, and localized interfacial structures can be resolved in a stable and efficient manner. The proposed method is first assessed using the Sod shock tube, two-dimensional Riemann and Mach 3 wind tunnel problems. These benchmark tests demonstrate that the method accurately captures shock waves, contact discontinuities, slip lines, and shock reflections while suppressing nonphysical oscillations near strong gradients. The method is then applied to compressible two-phase interface simulations, where the sub-cell limiter is activated in interfacial regions to stabilize numerical flux evaluation across discontinuous material states and to preserve sharp interface structures without introducing additional degrees of freedom into the governing equations. Meanwhile, AMR automatically concentrates resolution around shocks and material interfaces, enabling detailed reconstruction of localized flow features with reduced computational cost. The numerical results show that the proposed unified shock/interface treatment can robustly resolve interacting shocks, material interfaces, and complex discontinuity-dominated structures, providing an efficient, high-fidelity tool for compressible two-phase flow simulations.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Unified shock and interface capturing in an adaptive high-order discontinuous Galerkin method for compressible two-phase flows
To improve the robustness and efficiency of high-order discontinuous Galerkin (DG) simulations for compressible two-phase flows, this study develops an adaptive shock capture DG strategy that combines a sub-cell limiter with adaptive mesh refinement (AMR). This work extends the shock capture sub-cell limiter strategy from conventional shock-dominated flows to two-phase interface simulations by treating the material interface as a shock-type numerical discontinuity. In this framework, both shock waves and material interfaces are handled within a unified sub-cell limiter-based and AMR-based DG formulation, so that discontinuous thermodynamic states, steep density gradients, and localized interfacial structures can be resolved in a stable and efficient manner. The proposed method is first assessed using the Sod shock tube, two-dimensional Riemann and Mach 3 wind tunnel problems. These benchmark tests demonstrate that the method accurately captures shock waves, contact discontinuities, slip lines, and shock reflections while suppressing nonphysical oscillations near strong gradients. The method is then applied to compressible two-phase interface simulations, where the sub-cell limiter is activated in interfacial regions to stabilize numerical flux evaluation across discontinuous material states and to preserve sharp interface structures without introducing additional degrees of freedom into the governing equations. Meanwhile, AMR automatically concentrates resolution around shocks and material interfaces, enabling detailed reconstruction of localized flow features with reduced computational cost. The numerical results show that the proposed unified shock/interface treatment can robustly resolve interacting shocks, material interfaces, and complex discontinuity-dominated structures, providing an efficient, high-fidelity tool for compressible two-phase flow simulations.
- Open Access
- 31 January 2026
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 39 (11)
GPGPU-accelerated discontinuous Galerkin method on computational aeroacoustics
- 31 January 2026
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 39 (11)
Open AccessGPGPU-accelerated discontinuous Galerkin method on computational aeroacoustics
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
A weakly compressible discontinuous Galerkin method for incompressible fluid flow and heat transfer problems
The weakly compressible approach offers a promising alternative to traditional incompressible solvers by preserving a simplified hyperbolic structure, enabling explicit time integration, and avoiding the solution of the pressure Poisson equation. Motivated by these advantages, this study integrates the weakly compressible formulation within a high-order discontinuous Galerkin framework to simulate incompressible flow and heat transfer problems. An exact Riemann solver is derived to account for buoyancy effects under the Boussinesq approximation, ensuring stable and accurate treatment of thermally driven flows. In addition, consistent boundary conditions, including Riemann far-field, isothermal/adiabatic wall, is developed to accommodate a wide range of flow and heat transfer configurations. A series of benchmark tests, covering steady and unsteady, inviscid and viscous cases, as well as natural and forced convection problems, demonstrate the method's high-order accuracy, robustness, and agreement with reference solutions. The numerical results elucidate the correlation between the artificial sound speed c0 and the underlying physical parameters.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
A weakly compressible discontinuous Galerkin method for incompressible fluid flow and heat transfer problems
The weakly compressible approach offers a promising alternative to traditional incompressible solvers by preserving a simplified hyperbolic structure, enabling explicit time integration, and avoiding the solution of the pressure Poisson equation. Motivated by these advantages, this study integrates the weakly compressible formulation within a high-order discontinuous Galerkin framework to simulate incompressible flow and heat transfer problems. An exact Riemann solver is derived to account for buoyancy effects under the Boussinesq approximation, ensuring stable and accurate treatment of thermally driven flows. In addition, consistent boundary conditions, including Riemann far-field, isothermal/adiabatic wall, is developed to accommodate a wide range of flow and heat transfer configurations. A series of benchmark tests, covering steady and unsteady, inviscid and viscous cases, as well as natural and forced convection problems, demonstrate the method's high-order accuracy, robustness, and agreement with reference solutions. The numerical results elucidate the correlation between the artificial sound speed c0 and the underlying physical parameters.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Geometry-aware generative hybrid meshing with anisotropic and isotropic elements
The generation of hybrid anisotropic-isotropic meshes is a crucial step in computational simulations, as it allows for the accurate representation of both isotropic and anisotropic physical properties. However, existing methods used for mesh generation typically rely on user-defined mesh size distributions (MSDs), which can be labor-intensive and may not adapt well to complex geometries. Moreover, due to the highly nonlinear relationship, it is challenging to directly generate the corresponding hybrid anisotropic-isotropic mesh from the geometric shape. In this paper, we propose GAIMesh, a data-driven end-to-end geometry-aware anisotropic-isotropic hybrid mesh generation framework based on artificial intelligence, to conditionally map the geometric shapes to hybrid meshes. The whole framework consists of three parts: geometric feature network (GFN), mesh diffusion network (MDN), and mesh mapping network (MMN). The GFN extracts the geometric features from the rasterized representation of the geometry, which enhances the representational ability of the extracted geometric features and mesh resolution independence. The MDN utilizes diffusion models to progressively refine the MSD conditioned on geometric features, gradually optimizing it from an initial random distribution to the final optimal conditional distribution. The MMN maps the high-dimensional MSD to a distribution of mesh node positions in space, which effectively transforms it into mesh node layouts, completing the spatial mapping from geometry to hybrid meshes. The proposed GAIMesh framework is evaluated on various complex geometries, including general shapes, airfoils, and missiles, demonstrating its ability to directly generate geometrically aligned hybrid meshes from the input geometries. The results exhibit the potential of GAIMesh to be a flexible and reliable tool for automatic hybrid anisotropic−isotropic mesh generation in scientific and industrial fields.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Geometry-aware generative hybrid meshing with anisotropic and isotropic elements
The generation of hybrid anisotropic-isotropic meshes is a crucial step in computational simulations, as it allows for the accurate representation of both isotropic and anisotropic physical properties. However, existing methods used for mesh generation typically rely on user-defined mesh size distributions (MSDs), which can be labor-intensive and may not adapt well to complex geometries. Moreover, due to the highly nonlinear relationship, it is challenging to directly generate the corresponding hybrid anisotropic-isotropic mesh from the geometric shape. In this paper, we propose GAIMesh, a data-driven end-to-end geometry-aware anisotropic-isotropic hybrid mesh generation framework based on artificial intelligence, to conditionally map the geometric shapes to hybrid meshes. The whole framework consists of three parts: geometric feature network (GFN), mesh diffusion network (MDN), and mesh mapping network (MMN). The GFN extracts the geometric features from the rasterized representation of the geometry, which enhances the representational ability of the extracted geometric features and mesh resolution independence. The MDN utilizes diffusion models to progressively refine the MSD conditioned on geometric features, gradually optimizing it from an initial random distribution to the final optimal conditional distribution. The MMN maps the high-dimensional MSD to a distribution of mesh node positions in space, which effectively transforms it into mesh node layouts, completing the spatial mapping from geometry to hybrid meshes. The proposed GAIMesh framework is evaluated on various complex geometries, including general shapes, airfoils, and missiles, demonstrating its ability to directly generate geometrically aligned hybrid meshes from the input geometries. The results exhibit the potential of GAIMesh to be a flexible and reliable tool for automatic hybrid anisotropic−isotropic mesh generation in scientific and industrial fields.