Wei Yang
Research Subjects
Wei Yang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Chenhao Tian
2 shared publicationsDong Feng
2 shared publications- Liang Wang
School of Safety Engineering, China University of Mining and Technology, Xuzhou 221116, China
2 shared publications Shulei Duan
2 shared publications- Yanbin Yao
China University of Geosciences, Beijing
2 shared publications Zefan Wang
2 shared publications
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Microwave-driven transport and breakthrough kinetics of coalbed methane through nanoconfined water barriers
Capillary blocking by liquid films, commonly known as the water lock effect, severely restricts methane transport in coal nanopores. This study employs nonequilibrium molecular dynamics simulations to systematically investigate the microwave-regulated migration of nanoconfined water and its impact on methane breakthrough dynamics across various pore sizes, hydration levels, and coal ranks based on realistic macromolecular structures. Results indicate that microwave irradiation markedly accelerates nanoconfined water diffusion and destabilizes the pore-throat liquid film. This enhancement is strongly governed by fluid–solid interfacial adsorption states; increasing hydration levels and coal rank promote the transition from strongly adsorbed to weakly adsorbed or free fluid phases, thereby intensifying the microwave response. Conversely, expanding the pore size under constant water content increases intrinsic diffusivity but diminishes the marginal microwave enhancement due to the weakened wall-confinement potential. Crucially, the improvement in fluid mobility arises from the synergistic contributions of thermal and non-thermal effects. At an initial temperature of 313 K, the non-thermal effect driven by high-frequency perturbations of the hydrogen-bond network contributes up to 59.4% of the total diffusion enhancement. In the tri-phase methane–water–coal system, microwave irradiation substantially shortens the methane breakthrough time by accelerating interfacial rearrangement. Within 319–349 K, the non-thermal microwave contribution accounts for 6.7% to 45.2% of the overall acceleration in overcoming the capillary barrier. These findings provide fundamental physical insights into the external-field manipulation of nanoconfined multiphase flows in coalbed methane reservoirs.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Microwave-driven transport and breakthrough kinetics of coalbed methane through nanoconfined water barriers
Capillary blocking by liquid films, commonly known as the water lock effect, severely restricts methane transport in coal nanopores. This study employs nonequilibrium molecular dynamics simulations to systematically investigate the microwave-regulated migration of nanoconfined water and its impact on methane breakthrough dynamics across various pore sizes, hydration levels, and coal ranks based on realistic macromolecular structures. Results indicate that microwave irradiation markedly accelerates nanoconfined water diffusion and destabilizes the pore-throat liquid film. This enhancement is strongly governed by fluid–solid interfacial adsorption states; increasing hydration levels and coal rank promote the transition from strongly adsorbed to weakly adsorbed or free fluid phases, thereby intensifying the microwave response. Conversely, expanding the pore size under constant water content increases intrinsic diffusivity but diminishes the marginal microwave enhancement due to the weakened wall-confinement potential. Crucially, the improvement in fluid mobility arises from the synergistic contributions of thermal and non-thermal effects. At an initial temperature of 313 K, the non-thermal effect driven by high-frequency perturbations of the hydrogen-bond network contributes up to 59.4% of the total diffusion enhancement. In the tri-phase methane–water–coal system, microwave irradiation substantially shortens the methane breakthrough time by accelerating interfacial rearrangement. Within 319–349 K, the non-thermal microwave contribution accounts for 6.7% to 45.2% of the overall acceleration in overcoming the capillary barrier. These findings provide fundamental physical insights into the external-field manipulation of nanoconfined multiphase flows in coalbed methane reservoirs.
- Open Access
- 1 August 2026
- Published by KEAI Publishing in Petroleum Science
Mechanistic decoupling and quantitative prediction of adsorbed-free methane redistribution after water-intrusion in coal
- 1 August 2026
- Published by KEAI Publishing in Petroleum Science
Open AccessMechanistic decoupling and quantitative prediction of adsorbed-free methane redistribution after water-intrusion in coal
- 7 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5114-5132
Study on Ultrasonic Modification of CH 4 /CO 2 Competitive Adsorption Behavior in Coal: A Pore Wall Molecular Structure Perspective
Ultrasonic excitation can increase the coal seam permeability to improve the CO2 injection efficiency during the CO2-ECBM process, but it may also cause changes in the coal molecules. To investigate the effect of chemical change caused by ultrasonics on CH4 and CO2 competitive adsorption behavior, this paper constructs the pore wall molecular structure model based on the coal chemical structure test results. The molecular simulation results show that the CH4 adsorption heat and adsorption density decreased with an increased pore size in single-component gas adsorption. The oxygen-containing structure slightly increased CH4 adsorption heat by reducing the effective pore size. Compared with CH4, CO2 had more significant adsorption characteristics. The CH4 and CO2 adsorption densities were more obviously affected by the effective pore size and dominant adsorption sites, respectively. In the gas competitive adsorption behavior, the energy probability density distribution curves showed that with increased CO2 injection, part of CH4 transferred from the low-energy to the high-energy region. During the CO2 injection, the gas density in the pores gradually increased, making the interaction energy between CH4 and CO2 more significant, especially for small pores. The injection of CO2 into large pores more effectively weakened the interaction energy between coal and CH4, weakening the CH4 adsorption capacity. The oxygen-containing structure may inhibit the competitive adsorption behavior in small pores, and this effect gradually weakened or even reversed with the increase of pore size. Ultrasonic excitation reduced the oxygen-containing structure, which improved the competitive adsorption behavior in small pores.
- 7 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5114-5132
Study on Ultrasonic Modification of CH 4 /CO 2 Competitive Adsorption Behavior in Coal: A Pore Wall Molecular Structure Perspective
Ultrasonic excitation can increase the coal seam permeability to improve the CO2 injection efficiency during the CO2-ECBM process, but it may also cause changes in the coal molecules. To investigate the effect of chemical change caused by ultrasonics on CH4 and CO2 competitive adsorption behavior, this paper constructs the pore wall molecular structure model based on the coal chemical structure test results. The molecular simulation results show that the CH4 adsorption heat and adsorption density decreased with an increased pore size in single-component gas adsorption. The oxygen-containing structure slightly increased CH4 adsorption heat by reducing the effective pore size. Compared with CH4, CO2 had more significant adsorption characteristics. The CH4 and CO2 adsorption densities were more obviously affected by the effective pore size and dominant adsorption sites, respectively. In the gas competitive adsorption behavior, the energy probability density distribution curves showed that with increased CO2 injection, part of CH4 transferred from the low-energy to the high-energy region. During the CO2 injection, the gas density in the pores gradually increased, making the interaction energy between CH4 and CO2 more significant, especially for small pores. The injection of CO2 into large pores more effectively weakened the interaction energy between coal and CH4, weakening the CH4 adsorption capacity. The oxygen-containing structure may inhibit the competitive adsorption behavior in small pores, and this effect gradually weakened or even reversed with the increase of pore size. Ultrasonic excitation reduced the oxygen-containing structure, which improved the competitive adsorption behavior in small pores.
- 9 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27988-28006
Mechanisms of Methane Occurrence in Strong and Weak Adsorption Zones of Coal Micropores: A Multifactor Decoupling Analysis
Methane adsorption is governed by multifactor synergies, leading to a complex occurrence mechanism. Based on micropore filling and adsorption potential theories, this study develops a coupled adsorption model differentiating strong and weak adsorption zones. This study utilizes molecular simulations to analyze the independent effects of the temperature, pressure, and pore size on methane occurrence in strong and weak adsorption zones. By integration of isothermal adsorption experiments and pore size distribution measurements, the influence of coal chemical properties was decoupled. Furthermore, an XGBoost-based predictive model was developed to estimate methane occurrence parameters under the combined influence of multiple factors. The results indicate that increasing pore size and temperature amplify differences in methane density and content between strong and weak adsorption zones, whereas elevated pressure attenuates these effects. Temperature and pore size reduce the adsorption constant b (1/PL) in both zones, with a more pronounced effect in the weak adsorption zone. Temperature has a minimal influence on the b1/b2 ratio, while pore size exerts a significant impact. Additionally, the proportion of strongly adsorbed methane increases slightly with temperature but decreases markedly with larger pore sizes and elevated pressures. Adsorption parameters, including gas density, generally rise rapidly before stabilizing as the coal rank (Ro,max) increases, with a turning point near 1.5%. Methane densities computed from 12 coal ranks using actual molecular structures align with model predictions with over 85% accuracy, confirming the model's reliability.
- 9 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (41) , 27988-28006
Mechanisms of Methane Occurrence in Strong and Weak Adsorption Zones of Coal Micropores: A Multifactor Decoupling Analysis
Methane adsorption is governed by multifactor synergies, leading to a complex occurrence mechanism. Based on micropore filling and adsorption potential theories, this study develops a coupled adsorption model differentiating strong and weak adsorption zones. This study utilizes molecular simulations to analyze the independent effects of the temperature, pressure, and pore size on methane occurrence in strong and weak adsorption zones. By integration of isothermal adsorption experiments and pore size distribution measurements, the influence of coal chemical properties was decoupled. Furthermore, an XGBoost-based predictive model was developed to estimate methane occurrence parameters under the combined influence of multiple factors. The results indicate that increasing pore size and temperature amplify differences in methane density and content between strong and weak adsorption zones, whereas elevated pressure attenuates these effects. Temperature and pore size reduce the adsorption constant b (1/PL) in both zones, with a more pronounced effect in the weak adsorption zone. Temperature has a minimal influence on the b1/b2 ratio, while pore size exerts a significant impact. Additionally, the proportion of strongly adsorbed methane increases slightly with temperature but decreases markedly with larger pore sizes and elevated pressures. Adsorption parameters, including gas density, generally rise rapidly before stabilizing as the coal rank (Ro,max) increases, with a turning point near 1.5%. Methane densities computed from 12 coal ranks using actual molecular structures align with model predictions with over 85% accuracy, confirming the model's reliability.