Ingomar Kelbassa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ingomar Kelbassa has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Dirk Herzog
Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT Hamburg Germany
3 shared publications - Sebastian Mansky
Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT
3 shared publications - Vishnuu Jothi Prakash
Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT
2 shared publications - Ampaiphan Atthapreyangkul
School of Materials Science and Engineering, UNSW, Sydney, NSW, 2052, Australia
1 shared publication - Andrey Molotnikov
School of Engineering, RMIT University, Melbourne, Australia
1 shared publication - Arthur Seibel
Leuphana University Lüneburg
1 shared publication
Latest Publications
- Open Access
- 1 November 2026
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (4)
Data-driven monitoring of laser metal deposition for enhanced process stability
Laser metal deposition (LMD) is an additive manufacturing (AM) process for producing near-net-shape parts. Maintaining consistent part quality over several production cycles remains challenging due to accumulating process instabilities. This work focuses on the integration of sensor systems and the development of a data-driven digital shadow to monitor and analyze long-term process behavior under constant process conditions. A comprehensive sensing architecture, including process and environmental sensors, as well as an industrial edge device for synchronized data acquisition up to 500 Hz were integrated. Twenty print jobs were conducted over several months, resulting in 320 Ti-6Al-4V specimens manufactured under fixed process parameters and characterized using destructive mechanical testing. The multisensor dataset was analyzed using exploratory statistical methods and multivariate machine learning models. Pairwise dependencies between sensor signals and mechanical quality metrics were investigated using Spearman rank correlation to capture monotonic relationships (ρ) and distance correlation (dCor) to identify nonlinear dependencies. In addition, machine learning models were trained to describe the combined influence of all sensor signals on the respective quality metrics. Model performance was evaluated using the coefficient of determination (R2) and mean squared error (MSE). Exemplary, across all sensors, one of the best-performing models achieved R2 value of 0.47 with an MSE of 234 for tensile strength. Melt pool width, optical coherence tomography based standoff distance, and machine vibration were identified via correlation analysis and in-sample attribution as the most influential signals for predicting density, hardness, and elongation at break.
- 1 November 2026
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (4)
Open AccessData-driven monitoring of laser metal deposition for enhanced process stability
Laser metal deposition (LMD) is an additive manufacturing (AM) process for producing near-net-shape parts. Maintaining consistent part quality over several production cycles remains challenging due to accumulating process instabilities. This work focuses on the integration of sensor systems and the development of a data-driven digital shadow to monitor and analyze long-term process behavior under constant process conditions. A comprehensive sensing architecture, including process and environmental sensors, as well as an industrial edge device for synchronized data acquisition up to 500 Hz were integrated. Twenty print jobs were conducted over several months, resulting in 320 Ti-6Al-4V specimens manufactured under fixed process parameters and characterized using destructive mechanical testing. The multisensor dataset was analyzed using exploratory statistical methods and multivariate machine learning models. Pairwise dependencies between sensor signals and mechanical quality metrics were investigated using Spearman rank correlation to capture monotonic relationships (ρ) and distance correlation (dCor) to identify nonlinear dependencies. In addition, machine learning models were trained to describe the combined influence of all sensor signals on the respective quality metrics. Model performance was evaluated using the coefficient of determination (R2) and mean squared error (MSE). Exemplary, across all sensors, one of the best-performing models achieved R2 value of 0.47 with an MSE of 234 for tensile strength. Melt pool width, optical coherence tomography based standoff distance, and machine vibration were identified via correlation analysis and in-sample attribution as the most influential signals for predicting density, hardness, and elongation at break.
- Open Access
- 29 August 2026
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 147
Fatigue of AM TiAl6V4: Benchmark of defect criticality models
- 29 August 2026
- Published by Elsevier in Theoretical and Applied Fracture Mechanics
- Vol. 147
Open AccessFatigue of AM TiAl6V4: Benchmark of defect criticality models
- Open Access
- 5 August 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (11) , 4586-4606
Fatigue of AM TiAl6V4: Probabilistic Modelling of the Size Influence as a Transfer Method From Test Specimen to Part
This paper investigates the fatigue behavior of additively manufactured TiAl6V4 by comparing two specimen geometries with different highly stressed volumes. A fracture mechanical approach based on the El‐Haddad–Smith–Topper model is combined with defect analysis through X‐ray computed tomography. A combined generalized extreme value and generalized Pareto distribution framework correlates defect size distributions with failure probability across all stress levels. Results show that larger highly stressed volumes increase failure susceptibility due to higher likelihood of critical defects, reducing the fatigue stress range at 50% failure probability from 882 to 611MPa. For topology‐optimized parts, components with localized stress concentrations are less susceptible to defects than those with homogeneous stress distributions. The highly stressed volume approach can yield misleading results for such geometries. The methodology enables transfer of laboratory results to components by integrating stress states, defect statistics, and volume effects.
- 5 August 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (11) , 4586-4606
Open AccessFatigue of AM TiAl6V4: Probabilistic Modelling of the Size Influence as a Transfer Method From Test Specimen to Part
This paper investigates the fatigue behavior of additively manufactured TiAl6V4 by comparing two specimen geometries with different highly stressed volumes. A fracture mechanical approach based on the El‐Haddad–Smith–Topper model is combined with defect analysis through X‐ray computed tomography. A combined generalized extreme value and generalized Pareto distribution framework correlates defect size distributions with failure probability across all stress levels. Results show that larger highly stressed volumes increase failure susceptibility due to higher likelihood of critical defects, reducing the fatigue stress range at 50% failure probability from 882 to 611MPa. For topology‐optimized parts, components with localized stress concentrations are less susceptible to defects than those with homogeneous stress distributions. The highly stressed volume approach can yield misleading results for such geometries. The methodology enables transfer of laboratory results to components by integrating stress states, defect statistics, and volume effects.
- Open Access
- 26 May 2026
- Published by SAGE Publications in Powder Metallurgy
- Vol. 69 (5) , 409-414
Tailoring microstructure and properties of Ti-6Al-4V from piston-based material extrusion through hot isostatic pressing
Piston-based material extrusion (PEX) is an additive manufacturing technology that enables the processing of metal injection moulding (MIM) feedstock to form green parts. The extrusion process does not require moulds and hence is a competitive alternative for the shaping of MIM process routes, offering short lead times and cost-efficiency for lower lot sizes, while integrating into the remaining process chain and equipment. This paper focuses on the microstructure and properties of Ti-6Al-4V fabricated by PEX and followed by a subsequent hot isostatic pressing (HIP) step for parts requiring superior density and mechanical properties. The HIP process is performed using standard as well as high-purity conditions (Quintus Purus ® ). After sintering, a globular, mostly α microstructure is observed. A subsequent HIP followed by rapid quenching transforms the microstructure to a bi-modal state. A similar effect on microstructure is observed for the Quintus Purus ® HIP; however, the formation of α-case on the part surface is avoided. While the mean density of the sintered parts is 97.2%, HIP leads to an increase to 98.9–99.3% with the remnant porosity mainly stemming from open, connected pores. Although the sintered specimens already fulfil the industrial requirements, the Quintus Purus ® HIP leads to a slight increase in yield and ultimate tensile strength at minimal reduction of elongation. The standard HIP shows the same but slightly more pronounced trend. The results show that by a careful design of the specific HIP conditions, the microstructure and properties can be tailored for a specific application.
- 26 May 2026
- Published by SAGE Publications in Powder Metallurgy
- Vol. 69 (5) , 409-414
Open AccessTailoring microstructure and properties of Ti-6Al-4V from piston-based material extrusion through hot isostatic pressing
Piston-based material extrusion (PEX) is an additive manufacturing technology that enables the processing of metal injection moulding (MIM) feedstock to form green parts. The extrusion process does not require moulds and hence is a competitive alternative for the shaping of MIM process routes, offering short lead times and cost-efficiency for lower lot sizes, while integrating into the remaining process chain and equipment. This paper focuses on the microstructure and properties of Ti-6Al-4V fabricated by PEX and followed by a subsequent hot isostatic pressing (HIP) step for parts requiring superior density and mechanical properties. The HIP process is performed using standard as well as high-purity conditions (Quintus Purus ® ). After sintering, a globular, mostly α microstructure is observed. A subsequent HIP followed by rapid quenching transforms the microstructure to a bi-modal state. A similar effect on microstructure is observed for the Quintus Purus ® HIP; however, the formation of α-case on the part surface is avoided. While the mean density of the sintered parts is 97.2%, HIP leads to an increase to 98.9–99.3% with the remnant porosity mainly stemming from open, connected pores. Although the sintered specimens already fulfil the industrial requirements, the Quintus Purus ® HIP leads to a slight increase in yield and ultimate tensile strength at minimal reduction of elongation. The standard HIP shows the same but slightly more pronounced trend. The results show that by a careful design of the specific HIP conditions, the microstructure and properties can be tailored for a specific application.
- 1 May 2026
- Published by Springer Nature
- p. 127-141
A Novel Approach for the Design and Validation of Components with Local Material Properties
- 1 May 2026
- Published by Springer Nature
- p. 127-141
A Novel Approach for the Design and Validation of Components with Local Material Properties
- 8 October 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 37 (4)
Design guidelines for multimaterial parts manufactured in the material extrusion of metals process
Multimaterial additive manufacturing enables the integration of different materials within a single component, allowing for tailored functionality and the reduction of process steps. Among available metal additive manufacturing (AM) techniques, material extrusion of metals (MEX/M) offers a cost-effective and feasible approach for the production of multimaterial parts using a commercial feedstock. This study focuses on the fabrication of green parts composed of pure copper (Cu) and Inconel 718 (IN718), selected for their highly complementary properties: Cu offers excellent thermal conductivity, while IN718 provides outstanding mechanical strength, as well as high corrosion and oxidation resistance. These characteristics make the Cu-IN718 combination particularly attractive for demanding aerospace applications, such as heat exchangers and combustion chambers. A design of experiments approach using response surface methodology was employed to evaluate the influence of key printing parameters, such as nozzle temperature, printing speed, extrusion multiplier, and layer thickness, on the density and dimensional accuracy of green part test specimens. Optimal process parameter sets for each individual material were identified and a corresponding parameter set for the multimaterial combination was subsequently derived. Different geometric features, various material topologies, and two interlocking geometries were analyzed to assess the print quality and geometric accuracy of multimaterial prints. The results were used to derive a set of design guidelines aimed at the manufacturability, reliability, and quality of Cu-IN718 green parts using MEX/M. These guidelines contribute to future standardization efforts in multimaterial extrusion, thus supporting more robust and reproducible production of components via metal AM.
- 8 October 2025
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 37 (4)
Design guidelines for multimaterial parts manufactured in the material extrusion of metals process
Multimaterial additive manufacturing enables the integration of different materials within a single component, allowing for tailored functionality and the reduction of process steps. Among available metal additive manufacturing (AM) techniques, material extrusion of metals (MEX/M) offers a cost-effective and feasible approach for the production of multimaterial parts using a commercial feedstock. This study focuses on the fabrication of green parts composed of pure copper (Cu) and Inconel 718 (IN718), selected for their highly complementary properties: Cu offers excellent thermal conductivity, while IN718 provides outstanding mechanical strength, as well as high corrosion and oxidation resistance. These characteristics make the Cu-IN718 combination particularly attractive for demanding aerospace applications, such as heat exchangers and combustion chambers. A design of experiments approach using response surface methodology was employed to evaluate the influence of key printing parameters, such as nozzle temperature, printing speed, extrusion multiplier, and layer thickness, on the density and dimensional accuracy of green part test specimens. Optimal process parameter sets for each individual material were identified and a corresponding parameter set for the multimaterial combination was subsequently derived. Different geometric features, various material topologies, and two interlocking geometries were analyzed to assess the print quality and geometric accuracy of multimaterial prints. The results were used to derive a set of design guidelines aimed at the manufacturability, reliability, and quality of Cu-IN718 green parts using MEX/M. These guidelines contribute to future standardization efforts in multimaterial extrusion, thus supporting more robust and reproducible production of components via metal AM.