ZFZile Feng

Zile Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zile Feng has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Finite Element Analysis of the Flexural Performance of ECC–Concrete Composite Beams Reinforced with GFRP–Steel Composite Bars

    by Yu Ling, Xin Luo, Shuo Xu, Zile Feng, Junzhe Qin, Yicong Zhong, Yongjian Cai

    GFRP-reinforced concrete structures often suffer from insufficient ductility and limited crack control capability. This study investigates the flexural behavior of ECC–concrete composite beams reinforced with steel–FRP composite bars (SFCBs) using finite element analysis. A three-dimensional nonlinear finite element model was developed in ABAQUS and validated against four-point bending tests of eight composite beam specimens. The model incorporated a bilinear constitutive relationship for SFCBs and a cohesive interface model to simulate the interaction between ECC and concrete. Based on the validated model, the effects of reinforcement type and ECC replacement height on the flexural performance of composite beams were evaluated. The results showed that the proposed model accurately reproduced the load–deflection responses, strain development, and failure processes of the tested beams. The reinforcement type significantly affected the overall structural behavior, resulting in different load-carrying characteristics and deformation responses. Increasing the ECC replacement height mainly improved the cracking resistance by increasing the cracking load and promoting a more uniform crack distribution, while its effects on the yield and ultimate loads were limited. ECC primarily contributed to crack control and damage mitigation, whereas SFCBs influenced the overall load-carrying behavior of the composite beams. These findings provide insights into the design and performance evaluation of ECC–concrete composite beams reinforced with SFCBs.

  • Open Access

    Experimental Study on Flexural Performance of SFCB-Reinforced ECC-Concrete Composite Beams

    by Yu Ling, Shuo Xu, Chaohao Bi, Zile Feng, Dian Liang, Yongjian Cai

    Engineered Cementitious Composite (ECC) exhibits superior tensile strain-hardening behavior and enhanced crack control due to its distinctive multiple cracking characteristic. In contrast, Steel–Glass Fiber Reinforced Polymer (GFRP) Composite Bars (SFCBs) combine the ductility of steel with the corrosion resistance of GFRP. To investigate the synergistic mechanisms for optimizing the performance of concrete structures, this study designed eight SFCB-reinforced ECC-concrete composite beams. Four-point bending tests were conducted to examine the influence of the ECC replacement height in the tension zone (hE/h = 0%, 16.67%, 33.33%, 50%) and the steel ratio in the bottom longitudinal reinforcement (As/Ab = 0%, 9%, 25%, 49%, 100%) on the flexural performance. The experimental results demonstrated the following: (1) Increasing the ECC replacement significantly improved both the ultimate bending capacity and ductility, while exerting a limited effect on flexural stiffness. Specifically, when increased from 0% to 50%, the ultimate bending strength and ductility index increased by 4.79% and 8.09%, respectively. (2) The steel ratio predominantly governed the yield behavior and crack development. Higher steel ratios resulted in increased flexural stiffness prior to yield, higher yield moments, improved ductility at failure, and superior crack control capability before yielding. (3) The synergistic mechanisms were identified: the ECC layer optimizes crack control by distributing crack-induced strains through multiple cracking, while the steel ratio within the SFCB regulates the ductile response. The findings of this study provide valuable theoretical guidance for enhancing the capacity and ductility of building structures.