Sheng Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sheng Li has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Eiichi Fukuyama
Department of Civil and Earth Resources Engineering Kyoto University Kyoto Japan
3 shared publications Hongchang Zhou
Green & Smart River‐Sea‐Going Ship Cruise and Yacht Research Center Wuhan University of Technology Wuhan China
1 shared publication- Jikai Sun
School of Civil Engineering, Tongji University Shanghai China
1 shared publication - Pengsen Wang1 shared publication
- Suifeng Wang
School of Water Resources and Hydropower Engineering, Wuhan University, Wuhan 430072, China
1 shared publication Xin Wei
1 shared publication
Latest Publications
- Open Access
- 13 October 2026
- Published by Wiley in Deep Underground Science and Engineering
Nanoscale fracture mechanisms in defective α‐ quartz induced by compression: Insights from molecular dynamics simulation
Clarifying the fracture mechanisms at the nanoscale is essential for constructing a multiscale framework of rock fracture. In this study, molecular dynamics simulation is employed to investigate the fracture behavior and associated strength evolution in defective α ‐quartz containing either a single hole or double holes under uniaxial compression. The effects of hole size, strain rate, and temperature are analyzed in relation to crack initiation, propagation, and coalescence, and the resulting evolution of uniaxial strength. The results show that the uniaxial strength in all cases is negatively correlated with hole size, while the influence of strain rate is generally limited but varies with hole size. Elevated temperature can reduce both the Young's modulus and peak stress of defective α ‐quartz. Moreover, amorphized zones forming around the lateral edges of holes serve as the primary sites for fracture initiation in all cases, and wing‐like shear fractures represent the dominant propagation mode. The configuration with double holes promotes indirect coalescence in the rock bridge region, while strain rate influences the coalescence patterns depending on hole size. These findings could offer useful insights for developing multiscale models for rock fracture.
- 13 October 2026
- Published by Wiley in Deep Underground Science and Engineering
Open AccessNanoscale fracture mechanisms in defective α‐ quartz induced by compression: Insights from molecular dynamics simulation
Clarifying the fracture mechanisms at the nanoscale is essential for constructing a multiscale framework of rock fracture. In this study, molecular dynamics simulation is employed to investigate the fracture behavior and associated strength evolution in defective α ‐quartz containing either a single hole or double holes under uniaxial compression. The effects of hole size, strain rate, and temperature are analyzed in relation to crack initiation, propagation, and coalescence, and the resulting evolution of uniaxial strength. The results show that the uniaxial strength in all cases is negatively correlated with hole size, while the influence of strain rate is generally limited but varies with hole size. Elevated temperature can reduce both the Young's modulus and peak stress of defective α ‐quartz. Moreover, amorphized zones forming around the lateral edges of holes serve as the primary sites for fracture initiation in all cases, and wing‐like shear fractures represent the dominant propagation mode. The configuration with double holes promotes indirect coalescence in the rock bridge region, while strain rate influences the coalescence patterns depending on hole size. These findings could offer useful insights for developing multiscale models for rock fracture.
- 13 March 2026
- Published by Elsevier in Computers and Geotechnics
- Vol. 195
Molecular dynamics study on nanoscale mechanical and fracture behavior of kaolinite with dual defects
- 13 March 2026
- Published by Elsevier in Computers and Geotechnics
- Vol. 195
Molecular dynamics study on nanoscale mechanical and fracture behavior of kaolinite with dual defects
- Open Access
- 13 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (11)
Transition From Plastic Flow to Fracture During Shear Collision of Nanoscale α ‐Quartz Asperities
Fault slip commonly leads to the collision and wear failure of asperities across broad length scales. Clarifying the multiscale wear failure mechanisms of asperities is essential for understanding the underlying principle of fault friction behavior. In this study, to investigate the still‐debated wear failure modes of nanoscale asperities, we conduct a series of 3‐D molecular dynamics simulations of semi‐spherical α ‐quartz asperity collisions under different boundary conditions, asperity radii ( R ), and contact configurations. The results indicate that both plastic deformation and fracture of α ‐quartz asperities can occur during frictional collision without creating surface grooves. Under constant normal stiffness‐like condition, the failure transition can be mapped by the vertical overlapping distance normalized by R between the summits of two asperities, as a function of R . Under constant normal load condition, the failure transition can be indicated by the peak tangential shear force. Essentially, the failure mode transition is controlled by subsurface contact stress evolution through the dependence of R and contact configuration. Finally, the results also reveal that the total wear volume of fractured asperities scales linearly with the total tangential shear work. These findings provide deeper insights into the wear failure mechanisms of nanoscale rock asperities during friction, which also help shed light on microscopic fault friction mechanisms.
- 13 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (11)
Open AccessTransition From Plastic Flow to Fracture During Shear Collision of Nanoscale α ‐Quartz Asperities
Fault slip commonly leads to the collision and wear failure of asperities across broad length scales. Clarifying the multiscale wear failure mechanisms of asperities is essential for understanding the underlying principle of fault friction behavior. In this study, to investigate the still‐debated wear failure modes of nanoscale asperities, we conduct a series of 3‐D molecular dynamics simulations of semi‐spherical α ‐quartz asperity collisions under different boundary conditions, asperity radii ( R ), and contact configurations. The results indicate that both plastic deformation and fracture of α ‐quartz asperities can occur during frictional collision without creating surface grooves. Under constant normal stiffness‐like condition, the failure transition can be mapped by the vertical overlapping distance normalized by R between the summits of two asperities, as a function of R . Under constant normal load condition, the failure transition can be indicated by the peak tangential shear force. Essentially, the failure mode transition is controlled by subsurface contact stress evolution through the dependence of R and contact configuration. Finally, the results also reveal that the total wear volume of fractured asperities scales linearly with the total tangential shear work. These findings provide deeper insights into the wear failure mechanisms of nanoscale rock asperities during friction, which also help shed light on microscopic fault friction mechanisms.
- Open Access
- 4 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (11)
Nanoscale Wear Mechanism of a Single α ‐Quartz Gouge Particle and Its Role in Friction Evolution
Nanoscale gouge particles are common products during both rock friction experiments and natural fault slip. However, the frictional wear mechanisms of nanoscale gouge particles and their role in the evolution of fault shear strength remain poorly understood. Therefore, we employed the molecular dynamics method to simulate a series of nanoscale single‐particle wear processes in α ‐quartz sandwiched by two rough surfaces composed of spherical asperities. We explored the effects of asperity interval, particle size, contact configuration and the normal force on the wear damage and wear volume of gouge particles, as well as the influence of particle wear damage mode on the friction coefficient. We observed that higher normal forces could induce particle breakage over shorter loading distances, and the particles underwent three wear stages: stable, sub‐stable, and fracture stages. At stable stage, the wear volume increased linearly with loading distance. Sub‐stable stage was characterized by superliner wear volume growth. The wear volume in both stable and sub‐stable wear stages could be predicted by tangential shear work, as the shear work scaled well with the wear volume. Finally, we measured the critical loading distance until particle fracture. The particle size, normal force and contact configuration could significantly influence the lifetime of α ‐quartz gouge particles, and particle fracture could lead to an immediate increase in friction coefficient rather than a decrease. These findings could provide useful insights into the nanoscale friction and wear mechanisms of gouge particles, which will contribute to the understanding of the microscopic fault frictional behavior.
- 4 November 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 130 (11)
Open AccessNanoscale Wear Mechanism of a Single α ‐Quartz Gouge Particle and Its Role in Friction Evolution
Nanoscale gouge particles are common products during both rock friction experiments and natural fault slip. However, the frictional wear mechanisms of nanoscale gouge particles and their role in the evolution of fault shear strength remain poorly understood. Therefore, we employed the molecular dynamics method to simulate a series of nanoscale single‐particle wear processes in α ‐quartz sandwiched by two rough surfaces composed of spherical asperities. We explored the effects of asperity interval, particle size, contact configuration and the normal force on the wear damage and wear volume of gouge particles, as well as the influence of particle wear damage mode on the friction coefficient. We observed that higher normal forces could induce particle breakage over shorter loading distances, and the particles underwent three wear stages: stable, sub‐stable, and fracture stages. At stable stage, the wear volume increased linearly with loading distance. Sub‐stable stage was characterized by superliner wear volume growth. The wear volume in both stable and sub‐stable wear stages could be predicted by tangential shear work, as the shear work scaled well with the wear volume. Finally, we measured the critical loading distance until particle fracture. The particle size, normal force and contact configuration could significantly influence the lifetime of α ‐quartz gouge particles, and particle fracture could lead to an immediate increase in friction coefficient rather than a decrease. These findings could provide useful insights into the nanoscale friction and wear mechanisms of gouge particles, which will contribute to the understanding of the microscopic fault frictional behavior.
- Open Access
- 14 October 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (20)
Nanoscale Plastic Wear of α ‐Quartz Asperities During Shear Sliding: Insights From Molecular Dynamics Simulations
Fault slip inevitably causes the multiscale wear damage of asperities, ranging from nanometers to meters. However, the nanoscale asperity wear mechanism remains poorly understood. While plastic wear has been inferred as one of the dominant wear modes, the dynamic wear mechanism of plastic wear has not been thoroughly investigated. Here, we explicitly present a series of nanoscale 3‐D plastic wear processes of α ‐quartz asperities by using molecular dynamics method, where asperity climbing mode dominates during the sliding. We identify a transition from atom‐by‐atom wear damage to layer removal of α ‐quartz asperities with increasing normal forces. Moreover, nanoscale wear volume evolution depends on the normal force and loading velocity and shows sublinear increase with loading distance. We confirm that the tangential shear work can well predict the nanoscale plastic wear volume under various loading conditions due to the proportional relation.
- 14 October 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (20)
Open AccessNanoscale Plastic Wear of α ‐Quartz Asperities During Shear Sliding: Insights From Molecular Dynamics Simulations
Fault slip inevitably causes the multiscale wear damage of asperities, ranging from nanometers to meters. However, the nanoscale asperity wear mechanism remains poorly understood. While plastic wear has been inferred as one of the dominant wear modes, the dynamic wear mechanism of plastic wear has not been thoroughly investigated. Here, we explicitly present a series of nanoscale 3‐D plastic wear processes of α ‐quartz asperities by using molecular dynamics method, where asperity climbing mode dominates during the sliding. We identify a transition from atom‐by‐atom wear damage to layer removal of α ‐quartz asperities with increasing normal forces. Moreover, nanoscale wear volume evolution depends on the normal force and loading velocity and shows sublinear increase with loading distance. We confirm that the tangential shear work can well predict the nanoscale plastic wear volume under various loading conditions due to the proportional relation.