NJNina Jovović

Nina Jovović

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nina Jovović has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of curing temperature on the properties of fly ash-based geopolymers doped with a waste plastic

    by Nebojša Tadić, Nina Jovović, Irena Nikolić, Vanja Asanović, Radomir Zejak, Dejana Dizdar, Biljana Damjanović-Vartnica

    This study investigates the influence of curing temperature on the properties of fly ash-based geopolymer composites containing waste high-density polyethylene (HDPE) and polypropylene (PP). Geopolymer specimens were prepared by replacing 10 wt.% of fly ash with plastic waste particles and cured at temperatures ranging from 20°C to 65°C. The mechanical properties, including compressive and flexural strength were evaluated. The results showed that increasing curing temperature significantly enhanced the mechanical performance of both HDPEand PP-doped fly ash-based geopolymer composites. The highest compressive and flexural strengths were obtained for both, HDPE and PP composites, at 65°C.

  • Open Access

    Strength and microstructure of fly ash based geopolymers containing waste plastic

    by Nebojša Tadić, Irena Nikolić, Nina Jovović, Aleksandar Drakulović, Vuk Radmilović

    This paper investigated the properties of fly ash based geopolymers containing waste plastic (high-density polyethylene (HDPE)). Influence of fly ash substitution with a 30% of plastic waste on the compressive and flexural strength unit weight and microstructure of geopolymers was investigated. The results have shown that plastic dosage led to the wakening geopolymer structure, i.e. impairs mechanical properties. The positive effect of plastic waste addition is reflected in the decrease of unit weight which is beneficial with respect of the structure load. Microstructural investigations have shown the particle of plastic waste embedded into the reaction product of geopolymerisation i.e. into the alumino-silicate gel.

  • Open Access

    Valorization of fly ash and plastic waste using geopolymerization technology

    by Nebojša Tadić, Irena Nikolić, Nina Jovović, Dejana Dizdar, Vanja Asanović, Milena Tadić

    This paper aimed to investigate the possibility of synthesis of geopolymers based on the fly ash with the addition of plastic waste (high-density polyethylene (HDPE) and polypropylene PP). Influence of plastic waste dosage and time of curing and solid to liquid (S/L) ratio on the compressive strength of fly ash-based geopolymes were investigated. The results have shown that fly ash-based geopolymers synthesized with plastic waste can be successfully prepared under the S/L ratio of 0.9 and 1, mass ratio of alkali activator (Na2SiO3/NaOH) of 1, and plastic dosage up to 30%. The highest strength displayed the geopolymers synthesized by the fly ash replacement with plastic waste of 10 %, cured for 48 h at S/L ratio of 0.9. Generally, flay ash-based geopolymer with the addition of HDPE reaches a higher strength in comparison to those prepared with PP under the same conditions of synthesis.