Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Haruhisa Nakano has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Two-Piece Multisegmental Le Fort I Osteotomy With 2 CAD/CAM Splints and a Real-Time Navigation System

    by Kazuki Nakashima, Hitoshi Sato, Motohiro Tanaka, Karen Yamaguchi, Nodoka Kindaichi, Haruhisa Nakano, Seigo Ohba

    Multisegmental Le Fort I osteotomy can be performed in the treatment of both excessive maxillary protrusion and an excessively narrow maxillary arch. Although combined anterior maxillary segmental and Le Fort I osteotomies are commonly performed as a multisegmental procedure, the accuracy of segmental repositioning may be insufficient. The aim of this study was to evaluate the accuracy of segmental repositioning after multisegmental Le Fort I osteotomy performed using 2 splints and a real-time navigation system. This study included patients who underwent 2-piece segmental Le Fort I osteotomy at a single institution between April 1, 2023, and August 31, 2026. Repositioning accuracy was assessed based on the gap between 6 reference points (bilateral central incisors, canines, and first molars) as seen on preoperative simulation and postoperative computed tomography data. A total of 7 females were included in this study. The lateral repositioning accuracy ranged from 0.33 to 0.46 mm. The gap in the anteroposterior direction was P =0.899) or region ( P =0.675). The utilization of 2 splints and a real-time navigation system may improve the accuracy of segmental repositioning in 2-piece multisegmental Le Fort I osteotomies.

  • Open Access

    Analysis of Masseter Muscle Structure in Patients with Mandibular Asymmetry Using Ultrasonic Diagnostic Equipment

    by Akito Umehara, Shugo Haga, Momoko Takakaze, Rika Kobayashi, Kanako Akatsuka, Misaki Yamashiro, Shiina Tatsuta, Haruhisa Nakano

    Mandibular asymmetry often requires orthognathic surgery, and postsurgical relapse remains a concern. The masseter muscle may influence stability, but most studies have emphasized volumetric rather than qualitative changes. This prospective study evaluated 24 patients with mandibular asymmetry using ultrasonography preoperatively and at 1, 3, and 6 months after surgery. The parameters measured were thickness, stiffness ratio, echo intensity, and blood flow. The results showed significant postoperative adaptations. Masseter echo intensity increased markedly at 1 month (p < 0.001), peaked at 3 months (p = 0.042), and decreased toward baseline at 6 months (p < 0.001). Blood flow increased significantly from T1 to T2 (p < 0.001). Bite force dropped transiently at 1 month (p < 0.001) but recovered by 6 months (p < 0.001). At baseline, BMI correlated with echo intensity (r = 0.724, p < 0.001) and grip strength correlated with bite force (r = 0.705, p < 0.001). The stiffness ratio difference (contraction–rest) correlated with bite force (right: r = 0.629; left: r = 0.690). Relapse occurred in 25% of patients and correlated only with preoperative deviation and not ultrasound indices. Conclusions: Ultrasonography revealed meaningful qualitative muscle changes during recovery, though these were not strong predictors of relapse. Ultrasound remains a reliable, noninvasive tool for monitoring postoperative adaptation.


  • Open Access

    Clear aligner orthodontic force and conformity during lateral expansion

    by Suzuka Suzuki, Haruhisa Nakano, Yu Kataoka, Koutaro Maki

    Purpose: This study aimed to find the clear aligner form which buccal tipping is less likely to occur by experimentally comparing the marginal type of the aligners with the orthodontic force and conformity (flotation) on the first molars during lateral expansion. Materials and methods: Four different marginal types (conventional aligners with no palatal coverage, partial palatal coverage [with or without 2.0 mm buccal extension], and complete palatal coverage) and three levels of lateral expansion (no expansion, 0.25-mm expansion, and 0.50-mm expansion) were used. The force applied to the first molar was measured by attaching a pressure sensor to the palatal side of the left first molar on a modelled maxillary constricted dental arch. The conformity (flotation) was measured by micro-CT with each aligner attached to the model. Results: Conventional aligners showed no significant difference in force at 0.25-mm or 0.50-mm expansion, but significant flotation at the midpoint and cervical side. The force of all three types of palatal coverage aligners increased significantly (p < 0.01) with increasing expansion and showed less flotation (p < 0.01) compared to the conventional type. Complete palatal coverage aligners had little flotation at 0.25-mm expansion and no expansion. Conclusion: Conventional aligners should have greater buccal tipping of the molars due to increased flotation with expansion. Complete palatal coverage aligners with 0.25-mm expansion had the best conformity, suggesting that they may prevent unplanned buccal tipping of the molars and allow lateral expansion to occur as intended.


  • Open Access

    Relationship of mandibular condylar length and anterior disk displacement of the temporomandibular joint to facial asymmetry in orthodontic Class II patients

    by Shizuka Namiki, Haruhisa Nakano, Keisuke Yano, Koutaro Maki

    One of the most predominant causes of mandibular retraction is mandibular condylar head deformities, such as osteoarthritis (OA) and idiopathic/progressive condylar head resorption (ICR/PCR). Although temporomandibular joint (TMJ) disk dynamics have been strongly linked to OA and ICR/PCR, and disk displacement can cause facial asymmetry, early detection and prevention of TMJ disk displacement are difficult. Therefore, this study sought to compare the connection between facial asymmetry, mandibular condylar length, and TMJ disk displacement in skeletal Class II patients without condylar head deformity. The study included 33 orthodontic Class II patients without condylar head deformity but did have TMJ symptoms. Those with mandibular deviation were assigned to Group A (Group A-L for long condylar heads and Group A-S for short condylar heads), while those without were assigned to Group B (Group B-L for long condylar heads and Group B-S for short condylar heads). Both Groups A and B had a laterality in the length of the condylar head, with the A-S group having a significantly shorter condylar head than the other groups. Severe disk displacement was noticed in 25% of patients in the A-L group, 40.0% in the A-S group, 15.4% in the B-L group, and 15.3% in the B-S group. Conclusively, even in cases without condylar head deformity or facial asymmetry, 15.3% of patients had a severe anterior displacement of the TMJ disk, indicating that the degree of disk displacement does not always correlate with the presence or absence of condylar head deformity.


  • Measurement of elastic strain recovery in an orthodontic aligner as a driving force for orthodontic treatment

    by Motoya Shiogama, Haruhisa Nakano, Moeka Sawamura, Naoki Yamaguchi, Naoki Takano, Koutaro Maki

    Orthodontic aligners undergo deformation during installation, producing an unexpected component of elastic restoring force that causes unintended changes in the dentition. The aim of this study was to investigate the relationship between strain and elastic recovery of the aligner. We distinguished the contributions to aligner deformation due to molding and installation by measuring the thickness distribution of an aligner after molding using micro-CT and tracking changes in grid patterns drawn on the sheet used to fabricate the aligner. The aligner was installed on a device that simulated canine movement. Although canine strain was quite strong around the cusp, and in premolar, it was observed mainly in their centers. Furthermore, after molding, thickness distribution of the aligner was found. But, it is no clear relationship between the thickness distribution and the strain distribution. Our method of analysis can help improve aligner design and establish molding method to deliver optimal orthodontic treatment.


  • Open Access

    Investigation of the association between vertical skeletal patterns and the timing of failure of temporary anchorage devices

    by Misato Yoshida, Haruhisa Nakano, Shugo Haga, Tsuneo Arishima, Koutaro Maki

    Temporary anchorage devices (TADs) have become increasingly popular as orthodontic treatment measures for anchorage or distal movement of molars. However, TAD failure is a major limitation, and the aim of this study was to examine the effects of various factors on the timing of TAD failure. This study included 467 TADs implanted on the buccal side of the molar region in 197 patients undergoing orthodontic treatment. The relationship between failure and sex, age, jaw (maxilla or mandible), side (left or right), Frankfort mandibular plane angle (FMA), point A-nasion-point B angle (ANB), overbite, and overjet was examined. The time (number of days) until failure was also investigated. The failure rates were significantly higher in men compared to women (23.9% vs. 13.6%; p-value=0.024), and in the mandible compared to the maxilla (28.2% vs. 11.8%; p-value<0.001). A significant difference by age-group was also observed (p-value<0.029), with the failure rates being highest among patients aged ≥30 years (29.8%). Approximately half (47.6%) of the maxillary failures occurred by day 120, and more than half (58.1%) of the mandibular failures occurred by day 60. Moreover, the failure rate by day 120 was higher in the maxilla when the FMA was smaller. The failure rates of TADs implanted on the buccal side of the molar region were influenced by sex, age, and location (i.e., mandible or maxilla). Failure tended to occur more rapidly and readily in mandibular compared to maxillary implants. Moreover, when considering the vertical skeletal pattern, failure rates <120 days after implantation tended to increase when the FMA decreased.


  • Change of Strain in Polyester Orthodontic Aligner during Thermoforming and Clinical Treatment

    by Naoki Yamaguchi, Naoki Takano, Motoya Shiogama, Moeka Sawamura, Haruhisa Nakano, Koutaro Maki

    Removable orthodontic aligners made of polymeric materials have advantages over metal wires, which are currently the mainstream in clinical treatment of teeth array alignment, because of better aesthetics and cleanliness. However, unintentional movement of teeth occurs during the treatment using aligners. Hence, deeper understanding of the load applied to teeth from the aligner is required. In the authors’ previous study, the strain distribution in polyester aligner when mounted on misaligned teeth was measured with the help of DIC (digital image correlation) technique, and it was found out that the strain recovery plays an important role in the treatment, which leads to the driving force to move the teeth. In this study, the strain was measured including the thermoforming process, and the strain recovery was investigated by comparing the strains in two situations with teeth misalignment and without misalignment after treatment. Since DIC is not applicable to the strain measurement during compression molding, large deformation of a 2 mm square grid printed on the polyester sheet was tracked for the calculation of deformation gradient tensor and stretch tensor. The strain was increased when the aligner was mounted on a misaligned tooth, but was recovered when it moved to a correct position.

  • Dental Mechanics in Orthodontic Treatment Using Polymeric Aligner

    by Naoki Yamaguchi, Naoki Takano, Motoya Shiogama, Moeka Sawamura, Haruhisa Nakano, Koutaro Maki

    Polymeric dental aligners are recently used in clinical treatment of misaligned teeth. In this study, a polyester sheet with 0.75 mm thickness was used and the mechanics of aligner in orthodontic treatment is discussed experimentally with the help of digital image correlation method. The experimental apparatus to apply prescribed displacement to aligners mounted on a teeth model was specially designed to simulate the treatment of misaligned left canine. It was found that the elastic recovery of deformed aligner when mounted on misaligned canine is the driving force in dental orthodontic treatment, and therefore the understanding the dental mechanics is important including the deformation mode of mounted aligner in orthodontic treatment. The experimental results implied that the shape of teeth, direction of movement of misaligned tooth during treatment and crooked shape of aligner at inter-teeth borders should be taken into account in the mechanics of aligner.

  • Present State and Remaining Problems in Orthodontic Occlusal Reconstruction (IV)

    by Haruhisa Nakano, Fumiye Ohmori, Masato Kubota, Koutaro Maki

    Recently, aging of the population accompanied by a reduction in the number of children is progressing rapidly due to prolongation of the mean lifespan and decreases in natality. This means that the burden placed on the public medical insurance system is approaching its limits. However, this burden can be reduced if many elderly people remain healthy. Thus, the aim of medical services must be changed from conventional ‘treatment of diseases’ to ‘prolongation of a healthy state in healthy people’. This is the essence of antiaging medicine. Similarly, in the fields of dentistry and orthodontics, which deal with health of the oral cavity, ‘prevention before the occurrence of disorders due to malocclusion’ is important in positive antiaging dental care.We performed early treatment in one patient with Labial inclination of the anterior teeth accompanied by traumatic occlusion of the mandibular anterior teeth, and in another patient with eruption disorder of the anterior teeth including an impacted tooth.1) As a result of the early treatment of maxillary protrusion accompanied by impression of the mandibular anterior teeth in the gingiva on the palatal side of the maxillary anterior teeth, not only could maxillary protrusion be successfully treated, but Labial inclination of the anterior teeth, median diastema, and regression of the gingiva on the palatal side of the maxillary anterior teeth due to collapse of the molar region could also be prevented.2) As a result of the early treatment of horizontal impaction of the maxillary right central incisor, crowding or root resorption of neighboring teeth due to the impacted tooth could be prevented.These results suggest that ‘prevention before the occurrence of disorders due to malocclusion’ is important in positive antiaging dental care.

  • Present State and Remaining Problems in Orthodontic Occlusal Reconstruction (II) Surgical Orthodontic Treatment

    by Masato Kubota, Katuei Tei, Haruhisa Nakano, Koutaro Maki

    Recently, the number of patients with severe jaw deformation who undergo treatment has been increasing in the orthodontic field since the start of health insurance coverage of the treatment of such disorders.In this study, to prevent the induction of functional problems in the mandibular joint and to improve mandibular deformity, we used different osteotomy methods in the left and right mandibular ramus, i.e., intraoral vertical ramus osteotomy in the left side and sagittal splitting ramus osteotomy in the right side. Improvement of mandibular protrusion and normal occlusion were obtained by surgical orthodontic treatment, but the mandibular asymmetry could not be improved.From experience of the reconstruction of malocclusion in jaw deformity, development of the following methods was considered necessary based on problems in orthodontic treatment and future prospects:1. Diagnostic method by highly accurate and high-dimensional imaging, 2. Biomechanical analysis and a simulation method in each patient, 3. Genetic diagnosis method, 4. Development and improvement of orthodontic devices for the efficient movement of teeth.